Post your 1:1 Rock Crawler

[mindless]

96 XJ pile

[Cumberlandfarm1]

not a rock crawler but I do a little wheelin in it, mostly a farm truck

[ontherun]

the toys past and present....L

[jjt112]

My dad's, not mine.... But It's a semi father-son project.



42" iroks
dana 60 front
14 bolt rear
5.29 gears (i believe)
4.7l stroker I6
diesel cherokee 5 speed
atlas 2speed t-case
custom links, cage, dash, etc....

This is mine, stock plus an lsd in the rear, it'll stay that way until i can afford another wehicle....




'85 4runner converted to pickup cab due to a mix of rust and other happenings to the other cab.....

custom built flatbed (now has fenders to clear what the VIN says is stock 31's)

[Lentsnh2012]

I don't have it anymore because of school and it being a weekend warrior that could barely be driven on the road. It is a Jeep but everyone can STFU

Specs:
2004 Jeep TJX I6 4.0L 5 Speed
D30/D35
Grand Cherokee V8 Tierod
Advanced Adapter cable linkage TCase system
SYE
36x13.50x15 iRoks
Smittybilt Stinger bumper
Corbeau Baja SS with 4 point harnesses
Rough Country super flex 4" lift
Open diff with a heavy gas foot will get you anywhere ;)





And a 2002 Toyota Tacoma (when the owner isn't looking ;) )

2002 Toyota Tacoma SR5 Auto
TRD Supercharger with chip
TRD Exhaust
All-Pro front tube bumper
Warn 8k (?) winch
Marlin Crawler doubler
Stock rear case
HP D60 front/ shaved 14 bolt rear
Custom flat bed
40" iRoks with DIY beadlocks
Walker Evan coilovers
Chevy 63" springs
Interior rollcage



http://www.youtube.com/watch?v=3aT8-ykii4w

[xlt79brnc]

my 78 with one ton running gear.

[The Doc]

My Daily and crawler.
Vette tune port 350
NV4500 trans
300 twin stick
Dynatrac 60 front, 35 spline, ram assist steering, locker, 5:13
Sandy Cone rear full float disk, 35 spline, wilwood 4 piston, locker, 5:13
37'' BFG Krawlers
Allied Monster wheels, (Thats why Mayhems are so bitchen!!!)
Preimer welder
2 on board air systems
King coil overs front, 3 linked
Leaf over rear
1 ton driveshafts front and rear
101'' wheel base.
And lots more

[Tommy R]

Great rig, man! Is Four X Doctor your shop?

[The Doc]

Originally Posted by Tommy R

Great rig, man! Is Four X Doctor your shop?

Thanks, alittle old school, but really works good!! Yea, I started it back in 1988.

[Tommy R]

Originally Posted by The Doc

Thanks, alittle old school, but really works good!! Yea, I started it back in 1988.

Fantastic! I remember watching y'all build that aluminum CJ for the host of the Four Wheeler TV show a couple years ago. His name escapes me, but it was looking like a kick ass rig!

[CarterFab]

Originally Posted by Tommy R

Fantastic! I remember watching y'all build that aluminum CJ for the host of the Four Wheeler TV show a couple years ago. His name escapes me, but it was looking like a kick ass rig!

Tony Becker, he's a character. Got to hang out with him at TTC and bought his crew beer. And we gave him a hard time about that slow mo rollover that was in the intro of the show.

[The Doc]

Originally Posted by Tommy R

Fantastic! I remember watching y'all build that aluminum CJ for the host of the Four Wheeler TV show a couple years ago. His name escapes me, but it was looking like a kick ass rig!

Originally Posted by CarterFab

Tony Becker, he's a character. Got to hang out with him at TTC and bought his crew beer. And we gave him a hard time about that slow mo rollover that was in the intro of the show.

Toni is Definitely a person who believes in his way, but he's a cool guy...That build was alot of work for the time frame we had, we had to get it to moab for Easter safari. The last 3 days were non stop, Toni would go out and sleep in his box trailer sometimes while my crew was working on it, he couldn't hang lol..... He still has the Jeep but we put in a 5.3 motor in it now. We did'nt make the Jeep too crazy Toni just wanted it simple. And when he rolled it he really heard it from us, we almost left ass there till we came back down the trail. That was on one of the hammer trails.

[Tommy R]

LOL, that's good stuff right there! Really liked that rig and wish they could've showcased more of the fab work y'all were doing. Y'all were definitely under the gun, time-wise!

[The Doc]

[QUOTE=Tommy R;3990806]LOL, that's good stuff right there! Really liked that rig and wish they could've showcased more of the fab work y'all were doing. Y'all were definitely under the gun, time-wise![/QUOTE

I have a ton of pics of it if you want to see SOME.... I'm not posting them all lol.....

[Tommy R]

Please do! I'm sure I'm not the only one who'd be interested in seeing them!

[CSR]

Originally Posted by greencrawler

Here's a shot of my 85' yota 4runner
Attachment 190653

Love it! Looks like my '85 4runners big brother!



I go back and forth between owning real 4x4's and r/c 4x4's. Just saw that new Axial 2012 Rubi today.... might have to pick one up when they're released!

[spankrjs]

'83 Scrambler I completely rebuilt.

258 with Mopar MPI
Centerforce Clutch with T5 (holding up so far )
Dana 300 with 4:1 gears
Dana 30/Ox Locker/Warn Dana 44 Chromo shafts/Internal Hubs/4.10's/flipped tie rod and drag link
AMC 20 rear/Ox Locker/Warn Chromo Full Float Conversion/Disc Brakes/4.10's
33x12.50x15 BFG MT on factory steel wheels, white letters out
Rubicon Express 4.5" lift, 1" body lift

Warn 9500, 20 gallon tank, cage, 1/2 soft top, etc

Trailers are for broke rigs

Drove from south Mississippi to Moab Utah, wheeled a week, drove back. Drove to michigan to play in the sand dunes and back one weekend, it's had a fun first 10,000 miles this year

Golden Crack



Pritchett Canyon



Playing in the sand at Silver Lake Sand Dunes, Michigan




Bogs and Boulders Alabama

[jeepyj2000]

Here is a pic of my junk
97tj mabnum v8 rockwells 47" ltbs

[Manning]

Here's a couple vids of mine......
https://www.youtube.com/watch?v=QtK3HSiIEFY

disney labor day 2012 :: manningwailingwallarea.mp4 video by skyhiranger - Photobucket


http://youtu.be/zMBZJUyZlhQ

[highhpcummins]

Originally Posted by jeepyj2000

Here is a pic of my junk
97tj mabnum v8 rockwells 47" ltbs

Build thread on pirate or anywhere?