RCCrawler Forums

swollen goat · 05-27-2011, 12:56 PM

How about a little binder action

Here's my 75 International Scout II,
Detroits front and rear, 4.56 gears
35 bfg mt's
spring over lift,
rebuilt Internation 392
Pretty fun little rig,

Here's some shots from some rocks just 30 mins. from St. George

bigjay74 · 05-28-2011, 12:22 AM

Quote:

Originally Posted by swollen goat

How about a little binder action

Here's my 75 International Scout II,
Detroits front and rear, 4.56 gears
35 bfg mt's
spring over lift,
rebuilt Internation 392
Pretty fun little rig,

Here's some shots from some rocks just 30 mins. from St. George

Finially a true truck i have a 73 that im starting the build in a month or 2. I will have puts up soon as we start the buid

Harvo · 05-28-2011, 06:08 AM

This was my CJ7 at Wind Rock on the Rattlerock trail about 3 months after it opened.

RcBro · 05-30-2011, 10:31 PM

Here's some of my truck. I got this truck for free from my uncle, bone stock with 55,000 miles. It was my first truck, drove it everyday to college for 2 years 45miles one way. All over Oregon for races, and once I got another ride the fun began.

Specs:
1980 Toyota
37" Iroks
LockRite front
Welded Rear
63" Rear
RUF
Dual Cases
Bucket Seats
Interior Cage, Sliders, front and rear bumpers
20R Currently, have a 3rz with 33,000 going in when money allows

BigFish · 05-31-2011, 06:25 PM

my '76 fj40 trail rig...

2500hdon37s · 05-31-2011, 06:45 PM

going to pick this up here in a week or two from my cousin, '87 k10! and already has a 4in lift!

yea, real men wheel full sizes!

just needs a new rear axle (getting a 14 bolt)
and putting the built 350 /w Edelbrock top end back in it and get it running.

plans are for 42in Irok's or TSL's under 12in of lift with 5.38 gears and some good ole home brew welded lockers. (yea its gonna be a mud rig! not much for trails and rock parks here)

interior is perfect and zero rust, as well it is painted tuxedo black to match the other two Chevys in my drive!

just got to get the rear axle for it bolt it up, roll it on my trailer, get it home, and start the motor install then lift!

I dont think this is bad for my first wheeling rig, and me being only 17!

2500hdon37s · 05-31-2011, 07:17 PM

Quote:

Originally Posted by Drail

this is a friend of mine's rig. it's still a work in progress but is slated to be up and running mid 2011. all the work is dun by himself and friend's.

Drail

Built ford tough with Chevy stuff?

looks like a gm motor.........

Harvo · 05-31-2011, 09:03 PM

Very Cool. Is this "URE"

Ever make it to Tellico back in the day?

lwb Sami · 05-31-2011, 09:18 PM

I'll play, here's one of my 2005 UROC Sami Buggy

Here's one of my 2004 UROC Buggy

Here's my LWB Sami, how often do you see a LWB Sami hanging on the wall in Upper Helldarado

stubs179 · 05-31-2011, 10:02 PM

Quote:

Originally Posted by BLOODBANE

How the hell did you get that thing all the way up there? Did you come in from the lake or Icehouse?

stubs179 · 05-31-2011, 10:16 PM

My '52 M38a1. It don't run but i have a shit load of stuff for it when i get the time, 12 sticks of tube for a cage, coilovers, all the brackets for the links, air locker for the rear, spool for the front and more. It will be fun some day

xgerstandtx · 06-01-2011, 12:18 AM

93 grand station wagon/318/231hd case
d30 HP 4.56/arb/superior shafts
8.8 4.56/detroit
Recon 10.5k winch
35'' brand new oldschool MTR's
I built everything on it.
It goes everywhere i want it to very comfortably

BigFish · 06-01-2011, 06:58 AM

Quote:

Originally Posted by Harvo

Very Cool. Is this "URE"

Ever make it to Tellico back in the day?

Yep it is uwharrie, about 30min from the house. And yes, tellico was my favorite place to wheel... Now we try to make atleast a trip a year to mountain city or harlan.

CarterFab · 06-01-2011, 07:38 AM

Here's a few of ours.
Dads CJ-7. Built 14 bolt and 60 stroked big block, atlas II, fox coil overs, blah blah blah.

The Dodge from TTC 06. Had a blast with this truck.

Stage 1 of my Ranger. Built to the hilt Toyota axles, dual cases w/twin stick, th350, 425hp @the wheels small block on race fuel, 37" MTR on avalanche engineering edition trail ready bead locks.

Stage 2. Same stuff just Tubed the rear and cut the doors. Built for Moab in 06.

Stage 3. Built into 4 seater for family fun, 42's.

Cages and 5 point harnesses save lives.

And the 88 XJ. Ugly exo cage that is coming off(I didn't build it), built 8.8 and 44, full hydro psc steering, 37" MTR. Most fun to wheel.

Don't have any pics of my brothers S-10 Jimmy on 2 1/2 tons on here right now. Also building an 05 double cab taco on tons right now.

neillarson · 06-01-2011, 08:12 AM

Where I live it is much more Mud and sand than rock but we do have a little. Here was my old one I recently sold,

And here are both of mine together

Replaced by this till the gas crunch hit me

Now I have use

zonkerd · 06-01-2011, 09:10 AM

my daily driver 83 cj8,360 magnum with 4spd auto,60`s,atlas2,cold ac too

stubs179 · 06-01-2011, 05:33 PM

Quote:

Originally Posted by zonkerd

my daily driver 83 cj8,360 magnum with 4spd auto,60`s,atlas2,cold ac too

Your Jeep is how i always know where to park for BYBRCC comps

If you ever skip one i will be lost for sure.

ZackMicF · 11-15-2011, 11:30 PM

here's mine
1979 Ford F150 Short Bed,
351M, Rear-ford 9", Front-Dana 44, 35's, just a SkyJacker leveling kit, 4 speed stick with a Granny gear, 3:50 Gears, and a bunch of goodies

mines the only ford in the bunch

frdtrkguy · 11-16-2011, 12:16 AM

90 YJ frame/tub, EFI 351w, NP435, BW 4407, 2005 superduty tons, 39 BFG Projects on DIY beadlocks. A pic from Fordyce this summer:

chip cross · 11-16-2011, 12:29 AM

Quote:

Originally Posted by angryone

Stage 1 of my Ranger. Built to the hilt Toyota axles, dual cases w/twin stick, th350, 425hp @the wheels small block on race fuel, 37" MTR on avalanche engineering edition trail ready bead locks.

Stage 2. Same stuff just Tubed the rear and cut the doors. Built for Moab in 06.

Stage 3. Built into 4 seater for family fun, 42's.

Not a F3RD guy but that Ranger is pure sex!

Here is my 7th

1976 GMC Jimmy 2006 EFI 350 hp 5.3/Th400/ t sticked np205, D60, 14 bolt, 4:56 gears, lockers and Hutchinson DBL beadlocks with 36X13.50.16 Bias Iroks

And maybe, just maybe my 8th if the seller will work with me.

05-27-2011, 12:56 PM	#141
swollen goat Pebble Pounder Join Date: Jul 2010 Location: St. George Posts: 167	How about a little binder action Here's my 75 International Scout II, Detroits front and rear, 4.56 gears 35 bfg mt's spring over lift, rebuilt Internation 392 Pretty fun little rig, Here's some shots from some rocks just 30 mins. from St. George Attached Images

05-31-2011, 06:45 PM	#146
2500hdon37s I wanna be Dave Join Date: Mar 2009 Location: sittin in the sky Posts: 4,626	going to pick this up here in a week or two from my cousin, '87 k10! and already has a 4in lift! yea, real men wheel full sizes! just needs a new rear axle (getting a 14 bolt) and putting the built 350 /w Edelbrock top end back in it and get it running. plans are for 42in Irok's or TSL's under 12in of lift with 5.38 gears and some good ole home brew welded lockers. (yea its gonna be a mud rig! not much for trails and rock parks here) interior is perfect and zero rust, as well it is painted tuxedo black to match the other two Chevys in my drive! just got to get the rear axle for it bolt it up, roll it on my trailer, get it home, and start the motor install then lift! I dont think this is bad for my first wheeling rig, and me being only 17! Last edited by 2500hdon37s; 05-31-2011 at 06:47 PM.

05-31-2011, 09:18 PM	#149
lwb Sami Quarry Creeper Join Date: Sep 2009 Location: Divide, CO Posts: 299	I'll play, here's one of my 2005 UROC Sami Buggy Here's one of my 2004 UROC Buggy Here's my LWB Sami, how often do you see a LWB Sami hanging on the wall in Upper Helldarado Last edited by lwb Sami; 05-31-2011 at 09:31 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-28-2011, 06:08 AM	#143
Harvo I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind Posts: 6,386	This was my CJ7 at Wind Rock on the Rattlerock trail about 3 months after it opened.

05-30-2011, 10:31 PM	#144
RcBro RcBros Hobbies Join Date: Nov 2005 Location: Oregon Posts: 4,646	Here's some of my truck. I got this truck for free from my uncle, bone stock with 55,000 miles. It was my first truck, drove it everyday to college for 2 years 45miles one way. All over Oregon for races, and once I got another ride the fun began. Specs: 1980 Toyota 37" Iroks LockRite front Welded Rear 63" Rear RUF Dual Cases Bucket Seats Interior Cage, Sliders, front and rear bumpers 20R Currently, have a 3rz with 33,000 going in when money allows

05-31-2011, 06:25 PM	#145
BigFish Newbie Join Date: Jul 2009 Location: Oakboro-Charlotte, NC Posts: 34	my '76 fj40 trail rig...

05-31-2011, 09:03 PM	#148
Harvo I wanna be Dave Join Date: Mar 2008 Location: In the Dark Edges of your Mind Posts: 6,386	Very Cool. Is this "URE" Ever make it to Tellico back in the day?

05-31-2011, 10:16 PM	#151
stubs179 RCC Addict Join Date: Jul 2009 Location: Reno, Nv Posts: 1,964	My '52 M38a1. It don't run but i have a shit load of stuff for it when i get the time, 12 sticks of tube for a cage, coilovers, all the brackets for the links, air locker for the rear, spool for the front and more. It will be fun some day

06-01-2011, 12:18 AM	#152
xgerstandtx RCC Addict Join Date: Aug 2007 Location: Marshalltown Posts: 1,003	93 grand station wagon/318/231hd case d30 HP 4.56/arb/superior shafts 8.8 4.56/detroit Recon 10.5k winch 35'' brand new oldschool MTR's I built everything on it. It goes everywhere i want it to very comfortably

06-01-2011, 07:38 AM	#154
CarterFab Metal shaper Join Date: Dec 2008 Location: Hog Eye, Texas Posts: 3,519	Here's a few of ours. Dads CJ-7. Built 14 bolt and 60 stroked big block, atlas II, fox coil overs, blah blah blah. The Dodge from TTC 06. Had a blast with this truck. Stage 1 of my Ranger. Built to the hilt Toyota axles, dual cases w/twin stick, th350, 425hp @the wheels small block on race fuel, 37" MTR on avalanche engineering edition trail ready bead locks. Stage 2. Same stuff just Tubed the rear and cut the doors. Built for Moab in 06. Stage 3. Built into 4 seater for family fun, 42's. Cages and 5 point harnesses save lives. And the 88 XJ. Ugly exo cage that is coming off(I didn't build it), built 8.8 and 44, full hydro psc steering, 37" MTR. Most fun to wheel. Don't have any pics of my brothers S-10 Jimmy on 2 1/2 tons on here right now. Also building an 05 double cab taco on tons right now.

06-01-2011, 08:12 AM	#155
neillarson RCC Addict Join Date: May 2010 Location: The heart of the south Posts: 1,128	Where I live it is much more Mud and sand than rock but we do have a little. Here was my old one I recently sold, And here are both of mine together Replaced by this till the gas crunch hit me Now I have use

06-01-2011, 09:10 AM	#156
zonkerd I wanna be Dave Join Date: Nov 2007 Location: roseville Posts: 2,024	my daily driver 83 cj8,360 magnum with 4spd auto,60`s,atlas2,cold ac too

11-15-2011, 11:30 PM	#158
ZackMicF Quarry Creeper Join Date: Oct 2011 Location: Reno Posts: 204	here's mine 1979 Ford F150 Short Bed, 351M, Rear-ford 9", Front-Dana 44, 35's, just a SkyJacker leveling kit, 4 speed stick with a Granny gear, 3:50 Gears, and a bunch of goodies mines the only ford in the bunch

Sponsored Links

11-16-2011, 12:16 AM	#159
frdtrkguy I wanna be Dave Join Date: Feb 2007 Location: BFE, NV Posts: 2,324	90 YJ frame/tub, EFI 351w, NP435, BW 4407, 2005 superduty tons, 39 BFG Projects on DIY beadlocks. A pic from Fordyce this summer:

RCCrawler Forums

Thread: Post your 1:1 Rock Crawler