Tater Tot The truck, is a Mazda B4000, aka Ford Ranger. Built in 1996. She has the classic Ford 160 hp 220 ft lb 4.0 V6. 5 speeds on the floor and 4x4 with the flick of a switch on the dash. She has 190k on the clock and the engine is tired, but still running strong. The transmission shifts well, but the axles are noisy. (Bad pinion bearing) Tires are worn out as is the interior. She has killed two deer and the damage is evident on the front end. I have owned her 10 years and put 100k miles on her. I have abused her and haven't been good about Maintenace, so let's catch up. I plan on rebuilding her and documenting it here. Most of the work will be done by myself. Plans are upgrades with a mild lift, larger tires, lower gearing, lockers, lights, winch, Bumpers. Last year, I went through the cooling system, due to having a cracked side on the radiator tank, so it got a new radiator, water pump, clutch, fan, and hoses. A couple months later I built a bed rack from 2" square tubing and am teaching myself to weld... Introducing Tater Tot, The bed rack... https://i.imgur.com/2r1HMRwh.jpg I have since extended it out another 20 inches to the full length of the bed, ending just in front of the rear stake pockets... |
Re: Tater Tot I had one of these, alas it was the cheap version. 2wd, regular cab, 4 banger, 5 speed. I think it was a whopping 10K brand new. I was so cheap back then I drove it for a year without a radio. But as you say, its really a Ranger, it was a good truck for me. Traded it in with just under 100K. I did trade up tho, to my Cherokee Sport 4.0L 4wd. Looking forward to seeing you bring this back. I have an '03 now that I picked up for fun (Ranger that is). 3.0L, 4wd, regular cab. In process of putting disks on the back. Maybe I'll get some ideas from you. |
Re: Tater Tot Quote:
|
Re: Tater Tot I started a high clearance front bumper, don't worry, I plan on adding more tube and finishing the welding around the receiver. https://i.imgur.com/MBT0jmkh.jpg I also have some 31x 10.5 r15 tires on order to go on my new 15x8" rims... https://i.imgur.com/23F43b4h.jpg |
Re: Tater Tot |
Re: Tater Tot |
Re: Tater Tot They look good on there. Good clearance? No rubbing? I believe I read 31s should fit fine without a lift. |
Re: Tater Tot Quote:
|
Re: Tater Tot I wonder if fresh shocks would do the trick? |
Re: Tater Tot The sag is due to old springs, the shocks have less than 10k on them. Stock springs have 200+k on them. |
Re: Tater Tot I'm thinking some lift kits have springs, but not all. I've only briefly looked at them myself. |
Re: Tater Tot Quote:
|
Re: Tater Tot My Brother and I went out today to play in the snow and the mud! we had a blast... He has a 04 Ranger Fx4 with stock 4.10 gears and all over stock. Found some rocks to pose by... https://i.imgur.com/HidMOL3h.jpg https://i.imgur.com/5aC04FUh.jpg https://i.imgur.com/UtFIlHqh.jpg |
All times are GMT -6. The time now is 05:05 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com