Ecto-1 Pulled the trigger on the parts for my next build, the Ghostbusters ECTO-1. Going to start with a 1984 Kenner Real Ghostbusters ECTO-1 Ambulance. Parts: AE2 ESC Axial 27t motor Castle BEC Hitec 7954 servo SCX10 trans Hot Racing steel trans gears WB8 driveshafts SCX10 shocks (maybe, build will tell more) RC4WD Desert Kings 1.55 tires RC4WD Landies steel beadlocks I'll make my own links dependent on wheelbase LED lights with flasher for ambulance light bar (still need to get these) I'm not looking to build a hardcore crawler. I really want to build a cool looking, working, 4x4 ECTO-1. I will leave the body as stock as the build will allow. I plan to do some paint detail so the "gray" plastic will appear chrome. This will be a slow build. This has been on my mind for a while. I want to take my time and make this a nice looking 4x4 ECTO-1. As for a driver, well, I can only think of one man worthy of the job, Bill Murray. Once the build gets to a state of completion, worthy of Bill Murray, I will then hunt down a nice action figure to drive the ECTO-1. The ECTO-1 should be here in a few days and, the remaining parts should be around the same time. Hope to get started soon. If you want to watch an ECTO-1 come to life, stay tuned. If you want to see a build go up in flames, well, maybe stay tuned. Only time will tell. http://i894.photobucket.com/albums/a...ps2bc2caf2.jpg http://i894.photobucket.com/albums/a...ps3a692065.jpg And just for motivation. http://i894.photobucket.com/albums/a...ps516a04e4.jpg |
Re: Ecto-1 <iframe width="560" height="315" src="//www.youtube.com/embed/XL0DT7N42DU" frameborder="0" allowfullscreen></iframe> |
Re: Ecto-1 Will it glow in the dark????? |
Quote:
Sent from my iPhone using Tapatalk - now Free |
Re: Ecto-1 This is a very cool idea. Ill be watching Now. Where is my little brothers old ninja turtles van? |
All the parts should be in this week, including the body. Hope to get a start on some of it this weekend. Sent from my iPhone using Tapatalk - now Free |
Re: Ecto-1 I entered the ECTO-1 into the; Team OTTSIX build off. http://www.rccrawler.com/forum/gener...build-off.html I figure a chance at cash never hurt motivation. I'll start using a real camera and, stop taking photos with the phone. Looks like most the parts will be in this week. Hope to spend some time coming up with a plan once I have everything in front of me. Right now the biggest issue I see is using the SCX10 frame rails. Once the body is in hand it will be easier to address this. I want "real" rails, I dont want to attach everything to the plastic under body.... We'll see what happens. I'm looking forward to getting into this one. |
Re: Ecto-1 YES! I thought about this a while back, glad you're doing it! |
Re: Ecto-1 Holy cow, I had one of those as a kid... came with one of the guys (can't remember who...Egon maybe?) and a Slimer. Very nice! :) |
Re: Ecto-1 this reminds me, what ever happened to the guy doing the TMNT van build??? |
Re: Ecto-1 Quote:
The ECTO-1 toy isn't the most detailed but, I think with some attention to detail I can pull it off..... maybe If I wasn't such a GM snob, I would like to do, or see someone else do, the Bluesmobile. |
Re: Ecto-1 1:1 reference http://i894.photobucket.com/albums/a...ps82faf060.jpg http://i894.photobucket.com/albums/a...ps78660870.jpg http://i894.photobucket.com/albums/a...ps12d6caf6.jpg http://i894.photobucket.com/albums/a...ps82faf060.jpg http://i894.photobucket.com/albums/a...psc305942f.jpg http://i894.photobucket.com/albums/a...ps05ef626c.jpg http://i894.photobucket.com/albums/a...psc16aa9b8.gif http://i894.photobucket.com/albums/a...psb9351432.jpg |
I figure I could get a little start. Cleaning up the stock SCX10 axles. Nothing fancy, just some cleaning and lubing. Bearings felt good so, I'll save the cash and reuse them. Axle shafts were good as well. Rear axle will be a pain. I have a set screw I'll have to drill out. Promise betters pictures once the battery for the camera charges. Don't be jealous of my super work area (a joke). In my carport. Not heated or cooled. One of my dogs pisses on my chair leg (yes I clean it up, don't be gross). More to come soon... http://img.tapatalk.com/d/13/10/30/5y4a6anu.jpg http://img.tapatalk.com/d/13/10/30/peba7a4u.jpg http://img.tapatalk.com/d/13/10/30/e7yzama6.jpg http://img.tapatalk.com/d/13/10/30/etyhute3.jpg http://img.tapatalk.com/d/13/10/30/vutemujy.jpg http://img.tapatalk.com/d/13/10/30/ahe3y6ub.jpg http://img.tapatalk.com/d/13/10/30/a9y3ybuv.jpg http://img.tapatalk.com/d/13/10/30/9uqeva2y.jpg Sent from my iPhone using Tapatalk |
Re: Ecto-1 not that i'm cruel to animals, I love my house broke boxer, but if youll punch that dog in the nose the next few times he pisses on your chair, he'll stop....trust me |
Quote:
Sent from my iPhone using Tapatalk |
Re: Ecto-1 you aint going up no vertical ledges with an ass like that...:ror: that's fo sho..she's stacked! |
Re: Ecto-1 Quote:
|
Re: Ecto-1 Set screw needs to go. It was stripped out. http://i894.photobucket.com/albums/a...ps285b672d.jpg http://i894.photobucket.com/albums/a...ps55dd5cfd.jpg What's that saying, "right tool, for the right job". I didn't have that tool. http://i894.photobucket.com/albums/a...psa6f810f0.jpg Always wear your glasses http://i894.photobucket.com/albums/a...ps2933811a.jpg Things got serious. Stupid set screw. http://i894.photobucket.com/albums/a...ps4ef3fffa.jpg http://i894.photobucket.com/albums/a...ps8c23221c.jpg http://i894.photobucket.com/albums/a...psd2d93be3.jpg Damn.... Set screw out and finally putting things back together. http://i894.photobucket.com/albums/a...psd3774736.jpg Patched a couple holes with some two part epoxy. http://i894.photobucket.com/albums/a...psad63a801.jpg http://i894.photobucket.com/albums/a...ps653a4092.jpg http://i894.photobucket.com/albums/a...psdaaf73c4.jpg Well axles are back together. The rear will need to come apart again. I think I roughed up a gear. I took it apart and filed a couple teeth but, I'm not happy with it. That's a fix for later. http://i894.photobucket.com/albums/a...psd7366128.jpg I did this post using photobucket.... I'm going back to taptalk. Taptalk is much easier to post pictures and type under the image. After looking at some of the pictures, the camera shots are just as good, or better. |
Re: Ecto-1 Awesome idea man!! Watching this! |
All times are GMT -6. The time now is 03:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com