1.2 Pumpkin? I've been really taken by the Tamiya Pumpkin hard body. It’s a class M body and quite a bit smaller than 1/10 bodies out there. The idea is that it would work pretty will with the 1/14 scale tractor trucks out there. I spent the last month or so tracking down axles and trying to find wheels to fit. This is what I found so far. Redcat 1/16 crawler, and the new Axial 1.5/1.2 Yeti Jr wheels. I may step up to some 1.55 rims and the RC4WD 1.55 Dirt Grabbers. http://i1216.photobucket.com/albums/...529_230451.jpg http://i1216.photobucket.com/albums/...529_230544.jpg |
Re: 1.2 Pumpkin? That's going to be awesome! I don't know the measurements, but you could look into the MST CMX and Losi Mini Rock Crawler/Slick Rock axles. |
Re: 1.2 Pumpkin? The vaterra ascender axles have small pumpkins and can be narrowed quite a bit easily and may fit the body. Ben |
1.2 Pumpkin? I don't like agreeing with Jato, but check out the MST CMX/CFX chassis and/or axles, they match the Tamiya CC01 body dimensions. Sent from my iPhone using Tapatalk |
Re: 1.2 Pumpkin? The axles were the hard part to find, the CMX was too wide. The MRC was to narrow, not to mention a bit tough to source now. The new Yeti JR and trophy truck actually had the right width and wheelbase, but those diffs are open and I wanted a solid axle up front. Thunder Tiger makes a 1/12 scale along with ERC, but I think they would be a bit wide as well. I wanted the tires to tuck into the wheel wells. I settled on the Redcat 1/16 Everest as a donor truck. With a bit of work they should look like they belong on this truck. The real trick will be to figure out how to stuff a 2 speed transmission in this thing. |
Re: 1.2 Pumpkin? Got to go with a mini slash! <iframe src="https://www.youtube.com/embed/DaXUqv1CXmg" allowfullscreen="" width="560" height="315" frameborder="0"></iframe> |
Re: 1.2 Pumpkin? Quote:
|
Re: 1.2 Pumpkin? My Pumpkin body on a modified mini summit does a pretty good job at crawling. http://i1315.photobucket.com/albums/...ps7px53sst.jpg A 4:1 GRU, a Dynamite "Taser" esc, and 1.9s help a bit too. BUT ... I had to do some mod's to stretch the suspension to get the wheelbase to match, and I don't think you could do it with the Slash arms. Mine stands a bit wide, but it sure put new life into my 30 yr. old Pumpkin. :D And it still gets more run time than all the rest. 8) |
Re: 1.2 Pumpkin? Quote:
Quote:
Quote:
Quote:
|
Re: 1.2 Pumpkin? Slight change of plans. Using the axles off a Redcat Everest 16 they seem to fit under the Tamiya Jimny body much better. https://i.imgur.com/GKKCL8Rh.jpg https://i.imgur.com/FDA9WU3h.jpg Ordered some bits from Shapeways and they arrived yesterday! https://i.imgur.com/hrBHtdgh.jpg Had to make a custom nut driver to install the ball links. I'm trying to re-use as much as the donor hardware as possible. https://i.imgur.com/m4zq5I5h.jpg https://i.imgur.com/DPykteOh.jpg https://i.imgur.com/zCzBqUVh.jpg?1 https://i.imgur.com/vPQ1ztVh.jpg https://i.imgur.com/xWN17WDh.jpg https://i.imgur.com/nFNAuW7h.jpg https://i.imgur.com/NMpIZNqh.jpg |
Re: 1.2 Pumpkin? Hey that looks awesome! I am doing something similar but am going to persists with the Pumpkin body. What chassis is that??? |
Re: 1.2 Pumpkin? I couldn't find anything off the shelf and wanted to avoid using straight frame rails. I ended up drawing them in Fusion 360 and having Shapeways print them out in nylon. This is a much shorter wheelbase than the Pumpkin and I would need to modify them to fit. There are a few new 1/14 scale crawlers that have come out whose axles would fit better under the Pumpkin IMO. The ones off the 1/16 Redcat Everest would need spacers and the shock mounting is not ideal but could be made to work. |
Re: 1.2 Pumpkin? Once I wrap up this project I was going to pick up one of these and mount the Pumpkin on it. The only modifications needed would be to shorten the wheelbase by 15cm. TOYOTA HILUX 1/12 PICK-UP TRUCK-Thunder Tiger |
Re: 1.2 Pumpkin? Ok this looking cool! Isnt the lunchbox the same wheelbase as the pumpkin? And are those 1.5 wheels on the tiger? Hmmmmm..."thumbsup" |
Re: 1.2 Pumpkin? I'm not sure about the Lunchbox, the Pumpkin and the newest Jimny body from Tamiya share the same wheelbase I think. Some progress today. I got some 1/18 ECX shocks. The stock springs are way too stiff. Pulled the oil out of them and dropped in some internal springs. https://i.imgur.com/tc3baU4h.jpg Fab a front and rear bumper as well. https://i.imgur.com/0ZdXDrJh.jpg https://i.imgur.com/2haeqKAh.jpg |
Re: 1.2 Pumpkin? Here is a bit of a size comparison. 1.9 and 2.2 https://i.imgur.com/unMJhz8h.jpg VS. SCX10 https://i.imgur.com/SUKbUVIh.jpg https://i.imgur.com/3WX4Eukh.jpg |
Re: 1.2 Pumpkin? |
Re: 1.2 Pumpkin? Man, those Tamiya sticker sets take forever. I left the headlight lenses clear to add light buckets at a later point. The next bit is making sliders and finding something to cut wheel wells out of. https://i.imgur.com/AeYdDp0h.jpg https://i.imgur.com/6pAyxA9h.jpg |
Re: 1.2 Pumpkin? Thanks! I cobbled together some sliders and took it for spin in the yard. https://youtu.be/tkxASclVXZc https://i.imgur.com/TSF4yOLh.jpg |
Re: 1.2 Pumpkin? I've got some light buckets installed, waiting on brake LEDs to show up. Also mounted up an obscenely large winch on the front. I have some 1.5 wagon rims and dirt grabbers on the way, but I'm kinda digging the undersized tires. I'm kinda wanting to do the same thing to a Lunchbox. https://i.imgur.com/VglqIikh.jpg https://i.imgur.com/Dw1o9TZh.jpg |
All times are GMT -6. The time now is 12:40 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com