Mangler hard body Bronco I've had this body a while. I didn't want to start cutting on it until I had a few builds under my belt. I think I'm ready. I'm still not sure what chassis I will use but I'm leaning toward the MST CFX. This body is nearly identical in size to the Tamiya Bronco. I only need to move the rear wheel wells back. I figured if I was going to do that I might as well drop the bed too. Here is what I'm starting with. https://uploads.tapatalk-cdn.com/201...9b1465378e.jpghttps://uploads.tapatalk-cdn.com/201...4062213fdd.jpghttps://uploads.tapatalk-cdn.com/201...e06d9d1d01.jpghttps://uploads.tapatalk-cdn.com/201...110400d070.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco Always liked that body since I first seen one. Will be watching. |
Re: Mangler hard body Bronco It's 9 inch WB like this. I should be able to get 10 without stretching the body.https://uploads.tapatalk-cdn.com/201...159520803c.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco 1 Attachment(s) It's hard to decide on a chassis for this. I think this will work and allow me to keep the interior in tact, I hope. It looks like the shock towers are adjustable and the length is nearly perfect. I still have a set of D35's I havent found a home for that I might try on this. The width will probably be perfect. |
Re: Mangler hard body Bronco I finally got a chance to cut with sewing thread. It works great. https://uploads.tapatalk-cdn.com/201...a42f620919.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco Looking good. Always like seeing Bronco builds. |
Re: Mangler hard body Bronco nice. what chassis is that you posted above? |
Re: Mangler hard body Bronco Quote:
Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco 2 Attachment(s) |
Re: Mangler hard body Bronco :shock: beautiful!!! always loved that color. looks great on your pop's EB. looking forward to see more about that chassis. |
Re: Mangler hard body Bronco Not sure this will be the answer. It's a quality piece though.https://uploads.tapatalk-cdn.com/201...37e4a5705a.jpghttps://uploads.tapatalk-cdn.com/201...bf2cbfae5c.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco Here is a shortened beyond WB 1 Ascender chassis. It could possibly work with shorter shock towers.https://uploads.tapatalk-cdn.com/201...1f0abb31da.jpghttps://uploads.tapatalk-cdn.com/201...dff8f3ea1b.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco Harrison Ford stopped by to tell me how far back he wanted the wheel wells.https://uploads.tapatalk-cdn.com/201...b5aad7eb63.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco I used .060 styrene. I used plastic weld then filled the small gaps with JB Weld. I'll cut new wheel well after it dries.https://uploads.tapatalk-cdn.com/201...fc43ca77e5.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco Looking good. The ascender chassis looks like a good fit. |
Re: Mangler hard body Bronco Quote:
Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco Glad to see someone else using a mangler body!! I've been plugging away at mine the last few years as more tiny tire and swb options keep popping up. Here's one of the stages it was at, tore everything apart to change the chassis again. https://uploads.tapatalk-cdn.com/201...3f38ccb599.jpg Sent from my XT1650 using Tapatalk |
Re: Mangler hard body Bronco Wheel wells moved. Working on fitting the flares.https://uploads.tapatalk-cdn.com/201...48e2821cff.jpg Sent from my XT1585 using Tapatalk |
Re: Mangler hard body Bronco Anything in particular you want to see? Its just sitting on the shelf waiting to get finished lol https://uploads.tapatalk-cdn.com/201...022430068d.jpghttps://uploads.tapatalk-cdn.com/201...87fd7164e6.jpghttps://uploads.tapatalk-cdn.com/201...10429136c3.jpghttps://uploads.tapatalk-cdn.com/201...2b30560981.jpghttps://uploads.tapatalk-cdn.com/201...60a4563615.jpg Sent from my XT1650 using Tapatalk |
Re: Mangler hard body Bronco i'd like to see the underside of your body where the patch was installed. Also are those D35 axles on it in 1 of the pictures? |
All times are GMT -6. The time now is 07:48 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com