TF2 LC70 6x6 CMAX Chassis
 

So I started out with an RTR RC4WD medium wheelbase TF2. I immediately bought a VW LC70 kit, that's still sitting in the box.

I want to make a 1.5 LC70 6x6 with the Australian Multi Drive rear leaf suspension. As seen here. https://www.6-wheel-drive.org/conver...-lc70-6x6.html

Any of you fabricators or 3D printers have any thoughts?

The front shackle of the front leaf is attached to the outside of the frame. The rear shackle of the rear leaf is attached to the inside of the frame. There is a solid mount rotating above the rear most axle that connects the two leafs. This allows a floating connection to the front and rear leafs. Basically when the front axle compresses, it pushes the rear axle down, and vice versa. Load capacity of a leaf, with maximum traction and articulation.

Thoughts?

Also, I see GCM is releasing a c-clamp Ford style radius arm front coil suspension. Is anyone working on a Toyota front radius arm, coil?