Re: Johnny Builds a Brat Quote:
|
Re: Johnny Builds a Brat I know I probably lost a lot of folks when I said "Lexan Brat body." In an attempt to regain some credibility, I've decided to do a custom interior. I'm no stranger to the Lexan interiors, but this will be my first try at scratch building one (or at least mostly scratch building one). I don't have a lot of room to work with. I can only go down about an inch. As a result, I'm just going for something "Brat-esque" rather than trying to do a highly-detailed replica. My hope is to pick up some skills and experience that may help me out on some other build down the road. I started with a cardboard mock-up to get a general size. Then I had at the styrene stash that was mocking me (it's been sitting on the shelf so long it got complacent). That's a Knight Customs SR5 steering wheel, but it's pretty close to what was in the brat, so I went with it. I was also unsure about tackling the seats, so I cut down a couple from Cross RC. They aren't a match, but they'll do fine considering the limited visibility this interior will get. It's nothing special, but it's something. My favorite part was using a little Bondo to fashion the shift boot. I'm doing the work, I'm baby-stepping, I'm not a slacker! https://farm5.staticflickr.com/4803/...5c1b5d94_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4864/...5699db37_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4828/...c5b7244b_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4824/...b68b3f33_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4822/...294cc462_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7859/...6c463557_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr |
Re: Johnny Builds a Brat Still watching! :ror: |
Re: Johnny Builds a Brat Here's the interior all painted up. Again, not particularly impressive, but it feels vaguely Bratty to me. I can live with it. Steve seems pretty comfortable behind the wheel, so I'm happy. https://farm5.staticflickr.com/4806/...efc27200_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7861/...ebd1ae89_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4872/...04138551_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4847/...e250d3cf_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7849/...bd670113_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4899/...b8995cd1_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr |
Re: Johnny Builds a Brat Very 80s Japan interior sir! I could be convinced it's either brat or 86 Corolla gts. Thats a good thing! |
Re: Johnny Builds a Brat A couple more details to wrap this thing up... I got the wipers when I was building the Ford Courier for my dad. I think they're for the Mojave body. Anyway, they seemed like a good fit here. Steve wanted a vanity plate. His twin brother Alan got "BUCKY" for his Bronco. Steve thought "BRATTY" and "BUCKY" sounded pretty good together. https://farm8.staticflickr.com/7894/...2be4f8f2_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4863/...eb0d02f6_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7873/...bcdd909e_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7824/...740e842a_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr |
Re: Johnny Builds a Brat nice work on the plate! i need to revisit that art. printed mine and just used packing tape over the paper. didn't uh... didn't hold up too well when i dipped her toes in some water. wipers look good too. full reveal soon? |
Re: Johnny Builds a Brat Quote:
|
Re: Johnny Builds a Brat There are still some things I'd like to do to this tiny truck. Most noticeably, I'd like to add some side view mirrors, but the handfull I've tried so far haven't looked quite right. I'll run it this way for now and tell Steve to be careful merging onto the highway. I've got some shots of this thing on my kitchen table, but no one wants to see that. Here are a few glamour shots of the little blue Subaru Brat in the great outdoors before it gets chewed up out on the trails... https://farm8.staticflickr.com/7836/...e1073508_b.jpg amiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7916/...7a452a46_b.jpg amiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4864/...f99c8313_b.jpg amiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7853/...0e40fce5_b.jpg amiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm5.staticflickr.com/4914/...d0a48746_b.jpg amiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://farm8.staticflickr.com/7844/...561329d1_b.jpg amiya MF-01X Subaru Brat Build by johnny anguish, on Flickr |
Re: Johnny Builds a Brat I never knew 1.55's could look so big! that thing looks really good for a lexan body. I like it "thumbsup" |
Re: Johnny Builds a Brat Quote:
|
Re: Johnny Builds a Brat The Brat had its first outing. With minimal ground clearance, tiny tires and big overhangs, I went to a location that I thought would be a nice easy drive. Nope. We had gotten some snow previously, but it had warmed up and a lot of it had melted. Then things got brutally cold. What I hadn't anticipated was that over half of the trail would be blanketed in 3 inch deep, icy, rock hard, frozen footprints. Oof. As I started down the trail I thought about turning back. Then I had a brief conversation with Steve Man who said "We don't build shelf queens. Gimme the keys!" The truck performed admirably in conditions that it had no business performing admirably in. The front lip of the body ended up taking some damage. There was a little chipped paint and a small crack. The cold weather certainly didn't do me any favors there. I'll make some repairs and have it back on the trails in no time. Here are some photos from the non-icy-footprints-of-death parts of the trail... https://farm5.staticflickr.com/4884/...4b7fe8a4_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr https://farm5.staticflickr.com/4913/...4fbd1f63_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr https://farm5.staticflickr.com/4871/...7ffb1b93_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr https://farm8.staticflickr.com/7830/...0404bc81_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr |
Re: Johnny Builds a Brat Here's a quick look at the damage. On the left you can see the chipped paint. On the right is the crack. A little touch up paint, mesh tape and E6000 should have me back in business. https://farm8.staticflickr.com/7834/...0a003ddc_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr |
Re: Johnny Builds a Brat All patched up and back out on the trails... https://farm8.staticflickr.com/7809/...e7e7d34c_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr https://farm8.staticflickr.com/7832/...92028ceb_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr https://farm8.staticflickr.com/7852/...0be5b9de_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr https://farm8.staticflickr.com/7831/...139d54f0_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr |
Re: Johnny Builds a Brat As suspected with the wheelbase lengthening I did, the dogbones became an issue. Or, rather, the lack of dogbones became an issue. Around mile 7 I noticed the the rig was struggling a bit. At least a bit more than a tiny tire, independent suspension road-car-turned-trail-vehicle with almost no ground clearance would normally struggle. Turns out I was running in three wheel drive. https://live.staticflickr.com/7801/4...37732416_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr Was that going to stop me? Heck no! Should it have stopped me? Probably! You see, it was early in my outing. I wasn't ready to go home, so I decided to soldier on for another mile or so, sticking to the tamest of trails. The little Subie performed admirably under the conditions. Oh, any ideas what happens to Tamiya drive cups that don't have dog bones in them? Anyone? They fall out. Yup. So now I was out a dogbone and a drive cup. Not my finest moment. So I ordered up some replacement drive cups and universals to get the tiny truck back out on the trails. After the install there's a slight hitch in the rear drive train. It's something I want to look into, but doesn't affect things enough to keep it on the shelf. I also noticed that there's more contact with the rear suspension upright assembly and the center drive shaft cover than there was before. It sticks a bit. I suspect it's getting bendy (technical term) due to the way I had to reverse that assembly when lengthening the wheelbase. I'll have to look into that, too. Basically, this car is a disaster right now. Pretty much a failure. But it runs. And it's fun. So, yeah. https://live.staticflickr.com/65535/...db910b2d_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://live.staticflickr.com/65535/...f6879e3b_b.jpg Tamiya MF-01X Subaru Brat Build by johnny anguish, on Flickr https://live.staticflickr.com/65535/...2a6e5f79_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr https://live.staticflickr.com/65535/...fea2ac03_b.jpg Tamiya MF-01X Subaru Brat by johnny anguish, on Flickr |
Re: Johnny Builds a Brat Neato! "thumbsup" |
Re: Johnny Builds a Brat Quote:
|
Re: Johnny Builds a Brat Great job! Love it! |
Re: Johnny Builds a Brat I used a TT-02 chassis to build my Brat. No pics though because after making it look like a 4 year old painted it, I hid it under the stairs and only let it out on moonless nights. Scares even the werewolves away it’s so ugly. But very nice job on yours; Tamiya’s Subaru Brat and Kyosho’s Optima are my 2 very favorites RC buggies of all time! |
Re: Johnny Builds a Brat Quote:
How did it look on the TT-02 chassis? Was it fairly scale looking? I want to replicate something simliar to this one because the tires are tucked underneath and look realistic compared to the stock brat kit with the tires sticking way out to the sides. I wouldn't mind trying a slightly larger tire than the ones on this build. Ive been looking at tons of sites and threads trying to find a chassis that would give the brat this scale look. |
All times are GMT -6. The time now is 03:47 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com