RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   1.9 Scale Rigs (http://www.rccrawler.com/forum/1-9-scale-rigs/)
-   -   Justin's Street(1.9) Truck: SCX10 Hilux.... (http://www.rccrawler.com/forum/1-9-scale-rigs/176808-justins-street-1-9-truck-scx10-hilux.html)

justinart24 05-05-2009 03:47 PM

Justin's Street(1.9) Truck: SCX10 Hilux....
 
Welcome to my SCX10 Hilux build, its gone through many changes...enjoy.:mrgreen:

Here is the my "CURRENT" list of parts used as of 11/3/11."thumbsup"

Electronics...
ESC: Castle Creations - Mamba Max Pro
Motor: Brood Onslaught Type GT 35T
Spur: DuraTrax Spur Gear 32P 56T Nitro Evader BX
Pinon: Robinson Racing Pinion Gear 32P 9T
BEC: Caste Creations CCBEC (Set at 6V)

Wheels and tires...
Beadlocks: RC4WD Tango Down 1.9 Internal Beadlock Wheels
Tires: RC4WD FlashPoint 1.9 Military Offroad Tires

Axial axle upgrades...
Axial HEAVY DUTY BEVEL GEAR SET 36T/14T (Front Axle)
Axial HEAVY DUTY BEVEL GEAR SET 43T/13T (Rear Axle)
Vanquish Products High Steer Knuckles
Axial CVDs



OLD PICS, started off as a FJ40.




http://i80.photobucket.com/albums/j1...tinart24/6.jpg

Here is a pic of all my rides, E REVO, Slash, SCX10, AX10, TC5R and TT01.
http://i80.photobucket.com/albums/j1...nart24/all.jpg

justinart24 05-10-2009 11:21 PM

I made a video to show off my new head lights. All I had laying around to crawl was my TT01 driftcar and my TC5R roadcar.
:arrow::arrow::arrow::arrow::arrow::arrow:http://www.youtube.com/watch?v=a6suVR0EJ5A:shock::shock:

http://www.youtube.com/watch?v=eGdCDiGrwp4

bigdodge88 05-11-2009 01:49 PM

Looks good Justin. What made yougo with the Slingers rather than the Flat Irons?

IDnewcrwlr 05-11-2009 04:46 PM

thats a great lookin rig, now i cant wait til mine gets in!!! keep it up "thumbsup"

justinart24 05-11-2009 05:55 PM

Quote:

Originally Posted by IDnewcrwlr (Post 1788718)
thats a great lookin rig, now i cant wait til mine gets in!!! keep it up "thumbsup"

Thank a lot IDnEwCRwlR, good luck on your build, hit me up if you need any questions answered.

justinart24 05-11-2009 05:56 PM

Quote:

Originally Posted by bigdodge88 (Post 1788429)
Looks good Justin. What made yougo with the Slingers rather than the Flat Irons?

I like both, but I run the Mud Slinger with the Land Rover LR3 body(I think it looks for scale with this setup) and I run the Flat Irons with the FJ40 body. Also the Mud slingers are a bit smaller then the "Flat Irons". I usally run the Flat Irons for the ground clearance. Maybe I should by the 2.2 mud slingers....lol.

Thanks for looking!!!!

fernando 05-11-2009 10:01 PM

Nice
 
That truck truned out looking really nice. Great shop to work on your rigs."thumbsup"

justinart24 05-11-2009 10:08 PM

Quote:

Originally Posted by fernando (Post 1789336)
That truck truned out looking really nice. Great shop to work on your rigs."thumbsup"

Thanks "Fernado", its a nice bench but dag it gets messy fast...lol. I get tunnel vision when a new project hits!

Thanks for the comment! Rock on!

justinart24 05-12-2009 11:52 PM

Here is my workbench, finally clean.! :grin:
http://i80.photobucket.com/albums/j1.../garageeee.jpg

justinart24 06-05-2009 03:07 PM

I got a Hilux body, no more lexan for me1;)
I used a flat black on for the bed liner, turned out pretty sick.
http://i80.photobucket.com/albums/j1...tinart24/4.jpg
Here I am test fitting the bed. You can see the mounts I made, they are just flat Alum plates bolted on top of the SCX10 shock mounts.

I choose blue, and also note the paint on my palm, was wearing gloves, but was too excited to see the final outcome.:ror:
http://i80.photobucket.com/albums/j1...tinart24/8.jpg
Painted the Yota and hidges and etc.
http://i80.photobucket.com/albums/j1...inart24/10.jpg
http://i80.photobucket.com/albums/j1...4/IMG_0681.jpg
http://i80.photobucket.com/albums/j1...4/IMG_0682.jpg

http://i80.photobucket.com/albums/j1...inart24/14.jpg

My To do list...
Lenses
Lights
Winch
bumpers
interior

Well, thanks for looking.:lol::lol:

ccbg 06-06-2009 04:25 PM

Gimme the LR3 body :P :) I like what you did to the hilux. GOT FLEX? :OOO Nice. Man those LR3 are hard to come by around my country :sigh:

Creepy Inc. 06-06-2009 07:08 PM

http://i80.photobucket.com/albums/j1...tinart24/8.jpg
Painted the Yota and hidges and etc.



Dose etc mean your hand. :lol:
I've been there. Showed up at X-mas dinner with orange hands once. :ror:
The Co workers give me sh!t all the time.
Rig looks good.

justinart24 06-24-2009 06:36 PM

Got some new scale stuff."thumbsup"
http://i80.photobucket.com/albums/j1...4/IMG_0710.jpg

TLTCrawlin 06-24-2009 06:53 PM

Hell ya. I cant wait for my 1.9 truggy buildup.

Where is maryville?

justinart24 06-24-2009 07:09 PM

Quote:

Originally Posted by TLTCrawlin (Post 1861878)
Hell ya. I cant wait for my 1.9 truggy buildup.

Where is maryville?

Marysville is just north of Everett but I live in MillCreek now. Got a build thread yet?

TLTCrawlin 06-24-2009 07:25 PM

I got a start of one :D.

Im in Tri Cities, WA. Im coming to your side of the state this weekend though, but a little further over, Port Angeles.

justinart24 06-27-2009 10:21 PM

Here is a shot of my winch/front bumper. I plan on repainting the body this week, thinking about going with a metalic blue(simular to the blue already on it now). Also, yep, still waiting on my lenses, ahhhhhh!!!! waiting a month now.
http://i80.photobucket.com/albums/j1...4/IMG_0828.jpg

LIKES2CRAWL 06-28-2009 02:33 AM

The truck looks good but would look better with some tube bumpers instead of the usual HPI bumper...."thumbsup"

justinart24 06-28-2009 08:21 PM

Got my new tires picked out, will be ordering this week. There Rok Lox's.
http://www.rcrockcrawling.com/images/RokLox19Web3.jpg
http://i80.photobucket.com/albums/j1...4/IMG_0710.jpg

Stallion1967 06-28-2009 09:03 PM

sweet I just ordered a set of those for my wrangler to put on my new steel BL's from Rc4wd. Couldn't help myself.:mrgreen:


All times are GMT -6. The time now is 04:43 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com