RCCrawler Forums

justinart24 · 05-05-2009, 03:47 PM

Welcome to my SCX10 Hilux build, its gone through many changes...enjoy.

Here is the my "CURRENT" list of parts used as of 11/3/11.

Electronics...
ESC: Castle Creations - Mamba Max Pro
Motor: Brood Onslaught Type GT 35T
Spur: DuraTrax Spur Gear 32P 56T Nitro Evader BX
Pinon: Robinson Racing Pinion Gear 32P 9T
BEC: Caste Creations CCBEC (Set at 6V)

Wheels and tires...
Beadlocks: RC4WD Tango Down 1.9 Internal Beadlock Wheels
Tires: RC4WD FlashPoint 1.9 Military Offroad Tires

Axial axle upgrades...
Axial HEAVY DUTY BEVEL GEAR SET 36T/14T (Front Axle)
Axial HEAVY DUTY BEVEL GEAR SET 43T/13T (Rear Axle)
Vanquish Products High Steer Knuckles
Axial CVDs

OLD PICS, started off as a FJ40.

Here is a pic of all my rides, E REVO, Slash, SCX10, AX10, TC5R and TT01.

justinart24 · 05-10-2009, 11:21 PM

I made a video to show off my new head lights. All I had laying around to crawl was my TT01 driftcar and my TC5R roadcar.

http://www.youtube.com/watch?v=a6suVR0EJ5A

http://www.youtube.com/watch?v=eGdCDiGrwp4

bigdodge88 · 05-11-2009, 01:49 PM

Looks good Justin. What made yougo with the Slingers rather than the Flat Irons?

IDnewcrwlr · 05-11-2009, 04:46 PM

thats a great lookin rig, now i cant wait til mine gets in!!! keep it up

justinart24 · 05-11-2009, 05:55 PM

Quote:

Originally Posted by IDnewcrwlr

thats a great lookin rig, now i cant wait til mine gets in!!! keep it up

Thank a lot IDnEwCRwlR, good luck on your build, hit me up if you need any questions answered.

justinart24 · 05-11-2009, 05:56 PM

Quote:

Originally Posted by bigdodge88

Looks good Justin. What made yougo with the Slingers rather than the Flat Irons?

I like both, but I run the Mud Slinger with the Land Rover LR3 body(I think it looks for scale with this setup) and I run the Flat Irons with the FJ40 body. Also the Mud slingers are a bit smaller then the "Flat Irons". I usally run the Flat Irons for the ground clearance. Maybe I should by the 2.2 mud slingers....lol.

Thanks for looking!!!!

fernando · 05-11-2009, 10:01 PM

That truck truned out looking really nice. Great shop to work on your rigs.

justinart24 · 05-11-2009, 10:08 PM

Quote:

Originally Posted by fernando

That truck truned out looking really nice. Great shop to work on your rigs.

Thanks "Fernado", its a nice bench but dag it gets messy fast...lol. I get tunnel vision when a new project hits!

Thanks for the comment! Rock on!

justinart24 · 05-12-2009, 11:52 PM

Here is my workbench, finally clean.! :grin:

justinart24 · 06-05-2009, 03:07 PM

I got a Hilux body, no more lexan for me1;)
I used a flat black on for the bed liner, turned out pretty sick.

Here I am test fitting the bed. You can see the mounts I made, they are just flat Alum plates bolted on top of the SCX10 shock mounts.

I choose blue, and also note the paint on my palm, was wearing gloves, but was too excited to see the final outcome.

Painted the Yota and hidges and etc.

My To do list...
Lenses
Lights
Winch
bumpers
interior

Well, thanks for looking.

ccbg · 06-06-2009, 04:25 PM

Gimme the LR3 body :P

I like what you did to the hilux. GOT FLEX? :OOO Nice. Man those LR3 are hard to come by around my country :sigh:

Creepy Inc. · 06-06-2009, 07:08 PM

Painted the Yota and hidges and etc.

Dose etc mean your hand.

I've been there. Showed up at X-mas dinner with orange hands once.

The Co workers give me sh!t all the time.
Rig looks good.

justinart24 · 06-24-2009, 06:36 PM

Got some new scale stuff.

TLTCrawlin · 06-24-2009, 06:53 PM

Hell ya. I cant wait for my 1.9 truggy buildup.

Where is maryville?

justinart24 · 06-24-2009, 07:09 PM

Quote:

Originally Posted by TLTCrawlin

Hell ya. I cant wait for my 1.9 truggy buildup.

Where is maryville?

Marysville is just north of Everett but I live in MillCreek now. Got a build thread yet?

TLTCrawlin · 06-24-2009, 07:25 PM

I got a start of one

.

Im in Tri Cities, WA. Im coming to your side of the state this weekend though, but a little further over, Port Angeles.

justinart24 · 06-27-2009, 10:21 PM

Here is a shot of my winch/front bumper. I plan on repainting the body this week, thinking about going with a metalic blue(simular to the blue already on it now). Also, yep, still waiting on my lenses, ahhhhhh!!!! waiting a month now.

LIKES2CRAWL · 06-28-2009, 02:33 AM

The truck looks good but would look better with some tube bumpers instead of the usual HPI bumper....

justinart24 · 06-28-2009, 08:21 PM

Got my new tires picked out, will be ordering this week. There Rok Lox's.

Stallion1967 · 06-28-2009, 09:03 PM

sweet I just ordered a set of those for my wrangler to put on my new steel BL's from Rc4wd. Couldn't help myself.

05-05-2009, 03:47 PM	#1
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Seattle, Wa Posts: 2,742	Justin's Street(1.9) Truck: SCX10 Hilux.... Welcome to my SCX10 Hilux build, its gone through many changes...enjoy. Here is the my "CURRENT" list of parts used as of 11/3/11. Electronics... ESC: Castle Creations - Mamba Max Pro Motor: Brood Onslaught Type GT 35T Spur: DuraTrax Spur Gear 32P 56T Nitro Evader BX Pinon: Robinson Racing Pinion Gear 32P 9T BEC: Caste Creations CCBEC (Set at 6V) Wheels and tires... Beadlocks: RC4WD Tango Down 1.9 Internal Beadlock Wheels Tires: RC4WD FlashPoint 1.9 Military Offroad Tires Axial axle upgrades... Axial HEAVY DUTY BEVEL GEAR SET 36T/14T (Front Axle) Axial HEAVY DUTY BEVEL GEAR SET 43T/13T (Rear Axle) Vanquish Products High Steer Knuckles Axial CVDs OLD PICS, started off as a FJ40. Here is a pic of all my rides, E REVO, Slash, SCX10, AX10, TC5R and TT01. Last edited by justinart24; 12-03-2011 at 04:33 PM. Reason: spelling

05-11-2009, 10:01 PM	#7
fernando RCC Addict Join Date: Mar 2009 Location: In a very dark cave can't you tell... Posts: 1,708	Nice That truck truned out looking really nice. Great shop to work on your rigs.

06-05-2009, 03:07 PM	#10
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Seattle, Wa Posts: 2,742	I got a Hilux body, no more lexan for me1;) I used a flat black on for the bed liner, turned out pretty sick. Here I am test fitting the bed. You can see the mounts I made, they are just flat Alum plates bolted on top of the SCX10 shock mounts. I choose blue, and also note the paint on my palm, was wearing gloves, but was too excited to see the final outcome. Painted the Yota and hidges and etc. My To do list... Lenses Lights Winch bumpers interior Well, thanks for looking. Last edited by justinart24; 11-03-2011 at 11:04 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-10-2009, 11:21 PM	#2
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Seattle, Wa Posts: 2,742	I made a video to show off my new head lights. All I had laying around to crawl was my TT01 driftcar and my TC5R roadcar. http://www.youtube.com/watch?v=a6suVR0EJ5A http://www.youtube.com/watch?v=eGdCDiGrwp4

05-11-2009, 01:49 PM	#3
bigdodge88 RCC Addict Join Date: Jun 2008 Location: Monroe, NC Posts: 1,547	Looks good Justin. What made yougo with the Slingers rather than the Flat Irons?

05-11-2009, 04:46 PM	#4
IDnewcrwlr RCC Addict Join Date: Jan 2009 Location: ????? Posts: 1,059	thats a great lookin rig, now i cant wait til mine gets in!!! keep it up

05-12-2009, 11:52 PM	#9
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Seattle, Wa Posts: 2,742	Here is my workbench, finally clean.! :grin:

06-06-2009, 04:25 PM	#11
ccbg Pebble Pounder Join Date: Jan 2007 Location: Bulgaria, Sofia Posts: 128	Gimme the LR3 body :P I like what you did to the hilux. GOT FLEX? :OOO Nice. Man those LR3 are hard to come by around my country :sigh:

06-06-2009, 07:08 PM	#12
Creepy Inc. RCC Addict Join Date: Nov 2008 Location: Frederick Posts: 1,286	Painted the Yota and hidges and etc. Dose etc mean your hand. I've been there. Showed up at X-mas dinner with orange hands once. The Co workers give me sh!t all the time. Rig looks good.

06-24-2009, 06:36 PM	#13
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Seattle, Wa Posts: 2,742	Got some new scale stuff.

06-24-2009, 06:53 PM	#14
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	Hell ya. I cant wait for my 1.9 truggy buildup. Where is maryville?

06-24-2009, 07:25 PM	#16
TLTCrawlin I wanna be Dave Join Date: Apr 2005 Location: Eastern WA Posts: 2,489	I got a start of one . Im in Tri Cities, WA. Im coming to your side of the state this weekend though, but a little further over, Port Angeles.

06-27-2009, 10:21 PM	#17
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Seattle, Wa Posts: 2,742	Here is a shot of my winch/front bumper. I plan on repainting the body this week, thinking about going with a metalic blue(simular to the blue already on it now). Also, yep, still waiting on my lenses, ahhhhhh!!!! waiting a month now.

Sponsored Links

06-28-2009, 02:33 AM	#18
LIKES2CRAWL I wanna be Dave Join Date: Jun 2005 Location: KENNEWICK, WA Posts: 2,513	The truck looks good but would look better with some tube bumpers instead of the usual HPI bumper....

06-28-2009, 08:21 PM	#19
justinart24 I wanna be Dave Join Date: Feb 2009 Location: Seattle, Wa Posts: 2,742	Got my new tires picked out, will be ordering this week. There Rok Lox's.

06-28-2009, 09:03 PM	#20
Stallion1967 Rock Crawler Join Date: Oct 2006 Location: Tacoma Posts: 699	sweet I just ordered a set of those for my wrangler to put on my new steel BL's from Rc4wd. Couldn't help myself.

RCCrawler Forums

Thread: Justin's Street(1.9) Truck: SCX10 Hilux....