PFB's Chopped Yota Got all moved into my new place and got a MIG welder finally so here's my first attempt. It's all 3/16 solid rod. Had an SCX10 truck I built so I decided to convert that over. Not only did I want to try my hand at welding a tube bed up, but I wanted to make the SCX10 as capable as possible so my Dad and Brother (New to RC crawling) would be able to make difficult lines without getting discouraged while they were driving it. Onto the build: (I've been working on it for a little while but forgot to post it here) Gluing Reign's cab back using my newly acquired Cleco clamps http://farm3.static.flickr.com/2562/...024b9c34_o.jpg Then I glued the sides in and clamped them http://farm3.static.flickr.com/2430/...9af76695_o.jpg I coated all the seems with shoe goo on the inside after the initial CA glue was cured. I cut the end of the chassis off. Departure galore! Then I welded up the upright frame of the cage and the shock towers. (I doubt if I'll ever braze again haha) http://farm3.static.flickr.com/2599/...79330a83_o.jpg Trying to get the body in the right spot. I want it low but have to keep in mind the clearance needed for the 1.9 Rok Lox. http://farm3.static.flickr.com/2594/...547791ea_o.jpg Main rollbar sticks out just enough to protect the body's sides and top. Got the Hand Bros. C.M.S. Kit installed. What a nice kit! http://farm3.static.flickr.com/2497/...e8f0bf53_o.jpg Cage all tacked together. Just gotta finish welding and get the sliders done. http://farm4.static.flickr.com/3534/...823ba07d_b.jpg Front bumper was one Fletch built for me that was already on the frame. Got that modified for this body, mounted, and painted. Finished the sliders and painted all the tube work. http://farm4.static.flickr.com/3499/...7db221a1_b.jpg Still waiting on shocks and tires but this will be the ride height. Had to chop the fenders for the huge tire clearance. http://farm3.static.flickr.com/2680/...ebb64960_b.jpg Got some welds to clean up then I'll repaint. http://farm3.static.flickr.com/2771/...4e2a09fc_b.jpg Not sure what color the body will be. Maybe a flat red or tan. I'll probably cut the doors for half doors. Need to make some fender wells and a firewall of some sort. Might do a bolt in interior cage too. Not really sure how crazy I'll get with the interior yet. |
is that your gerage!?:shock: and nice truck. |
man am i right when i count 6 doors on that garage:shock: nice oh and the truck looks good man, like the depat angle"thumbsup" |
i like the 1.5 on 1.9 wheels but rok lox look bad a$$ "thumbsup" |
5 doors. 4 in front and one pass-through to the back. |
Quote:
Imma have to second that!!! ...... COME HOME!!!!! We miss you :cry: |
Nice rig!"thumbsup" |
Holy sweetness pfb. I vote slingers. |
what tires are the boggers |
1.55 RC4WD Mud Slingers |
what are the beadlock wheels you are using? i would love to get a set. |
I'm diggin this build! I really like the tube work. Just needs a propane tank. |
Quote:
Yep, thought a propane tank would look cool for this. |
thanks for that. hopefully in the near future i can start building something like this. love the rear tube work it looks really good |
those mudslingers really set it off think i might get a set |
The 1.55s actually stretch over the 1.9 wheels pretty well. If I didn't have a planned build for the slingers, they would stay on here. |
PFB, how is your cab mounted ? |
Any updates ? |
Quote:
Here's the start of the propane tank. http://farm5.static.flickr.com/4004/...c812e55d_b.jpg |
Dude I want one of those tanks, what's your PP addy? |
All times are GMT -6. The time now is 05:40 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com