|
Germanys TCS Projekt TrueScaleCrawler Hey Guys, after finishing my Jeep Wrangler Project i decide to build a 4 door Car. So i looked out for the Pajero and want to put them on a new SCX10 Chassis. I want to make this car as scale as i can and have car for driving and for show. Well we will see how it goes, here a some first shots. http://foto.arcor-online.net/palb/al...3063653866.jpg http://foto.arcor-online.net/palb/al...6336373534.jpg http://foto.arcor-online.net/palb/al...3061353766.jpg http://foto.arcor-online.net/palb/al...3134313636.jpg http://foto.arcor-online.net/palb/al...3730363164.jpg http://foto.arcor-online.net/palb/al...6162383836.jpg all the red lines i wat to cut, so there is a lot to do with my dremel. http://foto.arcor-online.net/palb/al...3363646262.jpg Next step in the documentation Thats what i have done today. C-holmes is in a new position Doors are out, dont know what to now :huh: the rear fender is in a new position The facts: http://foto.arcor-online.net/palb/al...6135353936.jpg http://foto.arcor-online.net/palb/al...3332663939.jpg http://foto.arcor-online.net/palb/al...3435303033.jpg http://foto.arcor-online.net/palb/al...3763613930.jpg Do you like the big sun roof, i dont know if i should close it... What do you think about this sunroof? http://image.jpmagazine.com/f/102837...r_top_view.jpg and that are Pics from the progress of today: http://foto.arcor-online.net/palb/al...3365626637.jpg http://foto.arcor-online.net/palb/al...3961626432.jpg http://foto.arcor-online.net/palb/al...6636373463.jpg http://foto.arcor-online.net/palb/al...6531653863.jpg Thre is a lot to fill and to sand, but i think first i will do the hard work, and the details later... Thorsten |
Next step in the documentation Thats what i have done today. C-holmes is in a new position Doors are out, dont know what to now :huh: the rear fender is in a new position The facts: http://foto.arcor-online.net/palb/al...6135353936.jpg http://foto.arcor-online.net/palb/al...3332663939.jpg http://foto.arcor-online.net/palb/al...3435303033.jpg http://foto.arcor-online.net/palb/al...3763613930.jpg Do you like the big sun roof, i dont know if i should close it... Thorsten |
Thats whats done today, i decide to change the servo mount position and after a little modding it is mounted now between the Frame and sits a lot higher than before. I think that looks much more scale than on the top of the axle. http://foto.arcor-online.net/palb/al...3163303639.jpg http://foto.arcor-online.net/palb/al...6566646139.jpg http://foto.arcor-online.net/palb/al...3763333166.jpg the new Rock Creepers and the HPI Rims are on the Chassis, these are much better than the bigger proline tires. http://foto.arcor-online.net/palb/al...3962373661.jpg Novaks 55t and the Rooster ESC are also installed, but i cant moove the whole car from front to back with hands, is that ok???? If i turn the big spur gear than it mooves??? http://foto.arcor-online.net/palb/al...3939306631.jpg and now with the Endoscelett on... http://foto.arcor-online.net/palb/al...3136303763.jpg http://foto.arcor-online.net/palb/al...6365626163.jpg Thorsten |
latest news from the last night. - New Rims fromTopcat, 0mm Offset, so the wheels stay closer together. - TLT Shocks - some new Body modifications maybe this is gonna be a new T-1000 and John Connor will drive it in Terminator 5 the new inner fender http://foto.arcor-online.net/palb/al...3331633536.jpg http://foto.arcor-online.net/palb/al...3931313564.jpg do you think it is to high? http://foto.arcor-online.net/palb/al...3134396166.jpg http://foto.arcor-online.net/palb/al...6639356264.jpg and thats the latest update, i am not sure to make this as its shown, but its just an experiment of how it will look like. http://foto.arcor-online.net/palb/al...3565663164.jpg Thorsten |
Actually the Cage is getting ready, i decide to build it first, because i have problems to install it after the body mods are done. http://foto.arcor-online.net/palb/al...3965363134.jpg Also the steering is changed, i mount the servo between the frame and made my own linkage, because i dont want to see the Servo in front of the Car. The Axial Gear is no longer on board, i made it with a RC4WD and a Scaleoffroad part, the car is running perfect, and i can build a flat floor inside the Car. http://foto.arcor-online.net/palb/al...3965623265.jpg http://foto.arcor-online.net/palb/al...6237383265.jpg http://foto.arcor-online.net/palb/al...3462623963.jpg Thorsten |
...and here he is! Just some facts and Pics i will present my new Driver, and i think i dont have to say anything about him! http://foto.arcor-online.net/palb/al...3764646566.jpg http://foto.arcor-online.net/palb/al...3639663632.jpg maybe just an small light in the right eye....:banana: then just a little bit modding the front grill. before http://foto.arcor-online.net/palb/al...3033633838.jpg after http://foto.arcor-online.net/palb/al...6633396463.jpg and just a small bumper with two seperate Lights for the Front, Winch included. http://foto.arcor-online.net/palb/al...6138363966.jpg http://foto.arcor-online.net/palb/al...3230616362.jpg http://foto.arcor-online.net/palb/al...3635663235.jpg For a flat floor in the Trunk section i changed the Shocks position. http://foto.arcor-online.net/palb/al...3235346664.jpg http://foto.arcor-online.net/palb/al...3132306138.jpg thats it for today Thorsten |
ok, thats whats done today. Front is complete, in both sides... http://foto.arcor-online.net/palb/al...6539643361.jpg even the inner Fenders are finished http://foto.arcor-online.net/palb/al...6334313133.jpg http://foto.arcor-online.net/palb/al...3237383965.jpg then i install the Firewall and a casr between the frame for the ESC and Light unit. http://foto.arcor-online.net/palb/al...6662316637.jpg i also startet modding the Taillights, i want to have them a little more realistic than on the Tamiya original Body. http://foto.arcor-online.net/palb/al...6538343939.jpg http://foto.arcor-online.net/palb/al...3830313964.jpg Thats it for Today Thorsten |
Hello, some news for today. The Seats are build 80% and get some konsoles to fix them in the Car. They are from www.modellautotechnik.de The next step was to fill an sand the whole body, i create new rear fenders, clean the roof and finaly sand it till everything looks clean and as one piece. http://foto.arcor-online.net/palb/al...3135633462.jpg http://foto.arcor-online.net/palb/al...6134363530.jpg Body Cleaning: http://foto.arcor-online.net/palb/al...3766636538.jpg http://foto.arcor-online.net/palb/al...3662333762.jpg http://foto.arcor-online.net/palb/al...3734356637.jpg http://foto.arcor-online.net/palb/al...3639303264.jpg http://foto.arcor-online.net/palb/al...3166393132.jpg http://foto.arcor-online.net/palb/al...3739353630.jpg Thorsten |
...latest news on the Body. i build up the Floor and some Update on the rear inner Fenders. Here are the latest Pics: http://foto.arcor-online.net/palb/al...3734633336.jpg http://foto.arcor-online.net/palb/al...3563316530.jpg This is my first try and i have to fill a lot of holes and sand a lot. http://foto.arcor-online.net/palb/al...6337383830.jpg http://foto.arcor-online.net/palb/al...3662633635.jpg http://foto.arcor-online.net/palb/al...6234356636.jpg http://foto.arcor-online.net/palb/al...3663356562.jpg http://foto.arcor-online.net/palb/al...3361303961.jpg Now i decide to rebuild my cage to create a new one that fits better with the seats. Thorsten |
Hey Guys, next Step in the Project: The dashboard is in , the floor and the rear panels are also build and step by step it lokks a little bit more like a car. http://foto.arcor-online.net/palb/al...3039393930.jpg The dash become foll lights and instruments soon. http://foto.arcor-online.net/palb/al...3336393636.jpg The old rollcage is no longer, i build a new one to fit it more with the other components in the interieur, i dont know if i build a full cage in brass, because it will be difficult withe the drivers legs and the dash. We will see. Here are the pics of today http://foto.arcor-online.net/palb/al...3337643166.jpg http://foto.arcor-online.net/palb/al...6336313466.jpg http://foto.arcor-online.net/palb/al...6537643531.jpg http://foto.arcor-online.net/palb/al...3565363438.jpg more in a few days i think! Thorsten |
on and on and on... So, taday i tried to build a battery case that can be installed as hidden as possible. I build a case for my 7,2V sticks and put it under the rear floor of the car. I will fill the space on the sides and give the case a finishing look of the original gas tank or something like this. This is only the "rolling box2, not finished at the moment. I put it just in to see how it looks and if it is maybe to big or something else. http://foto.arcor-online.net/palb/al...6365343764.jpg http://foto.arcor-online.net/palb/al...3435393666.jpg The battery fits very good in the case, so it wont be any nioses while driving. http://foto.arcor-online.net/palb/al...6137333938.jpg http://foto.arcor-online.net/palb/al...3961383739.jpg http://foto.arcor-online.net/palb/al...3039326163.jpg The rear section is now complete, only the details are missing. [img]http://foto.arcor- online.net/palb/alben/67/2258867/1024_3137623333323134.jpg[/img] http://foto.arcor-online.net/palb/al...3531373733.jpg And a little mistake on the front light, wrong glue i think, now it looks like the weather round the london tower....:rant: So, i will do it again! http://foto.arcor-online.net/palb/al...3532313561.jpg What do you think about the battery box, Go or NoGo??? Thorsten |
The Tail lights are theoriginal Pajero from the Tamiya body. I cut them out and removed the inner parts, then i rebuild the whole case around them, thats it! Today i finished the battery case, i made the last Part to hie the complete case. http://foto.arcor-online.net/palb/al...3966663136.jpg The i build the next part of the roll cage, it will become the spare Tire mounts and hold the battery case in a second way. http://foto.arcor-online.net/palb/al...3238646362.jpg Now we also have both Taillights [img]http://foto.arcor- online.net/palb/alben/67/2258867/1440_3961613136306263.jpg[/img] Also some news on the other side. And even Arnold has taken seat and fits perfect in front of the dash. http://foto.arcor-online.net/palb/al...3166356434.jpg http://foto.arcor-online.net/palb/al...6663383064.jpg Thats it for today... Thorsten |
Just some Pics from the ScaleRun in Switzerland at the weekend: http://foto.arcor-online.net/palb/al...6363626664.jpg http://foto.arcor-online.net/palb/al...3036313061.jpg http://foto.arcor-online.net/palb/al...3438616563.jpg http://foto.arcor-online.net/palb/al...6563353439.jpg and thats what the Car looks after the ScaleRun http://foto.arcor-online.net/palb/al...6465346534.jpg http://foto.arcor-online.net/palb/al...3139313238.jpg http://foto.arcor-online.net/palb/al...6564653932.jpg http://foto.arcor-online.net/palb/al...3135623632.jpg Thorsten |
thats what ive done today... I decide to build up the race Tank and some fire fighting parts http://foto.arcor-online.net/palb/al...6133306665.jpg http://foto.arcor-online.net/palb/al...3837346236.jpg the tank is complete with metal tubes and all parts that been needed. http://foto.arcor-online.net/palb/al...3338633365.jpg http://foto.arcor-online.net/palb/al...3030633265.jpg i have to direct the parts only a little bit, and no one can see my ECS or the Light unit later. That is what comes inside of the tank, the electric Light unit http://foto.arcor-online.net/palb/al...6138633231.jpg http://foto.arcor-online.net/palb/al...3837336333.jpg This is a actuall coming out part from switzerland, it can all thing that the Tamiya MFC can do, and some things more, but 10 times smaller than the Tamiya Mfc. So i am the first customer i think, that use, build and test this item to the bone... we will see, it looks great and i am happy to test it. Thats it for today... Thorsten |
The last Steps bevor painting the body... http://foto.arcor-online.net/palb/al...3762643432.jpg I sand and filled the body, removed the window frame on the rear windows, open a litte surprise on the rear left side to hide the main switcher behind it. http://foto.arcor-online.net/palb/al...3338333238.jpg http://foto.arcor-online.net/palb/al...3433343133.jpg http://foto.arcor-online.net/palb/al...3636393230.jpg That was going more easy than i thought http://foto.arcor-online.net/palb/al...3661623432.jpg http://foto.arcor-online.net/palb/al...3738376261.jpg That the progress for today, and i will start painting in the next days Thorsten |
So, these are the first shots from Today, no more words, just Pics.. The Colour is from the brand new BMW X1, i think that some guys like the brown or not. http://foto.arcor-online.net/palb/al...6334333439.jpg http://foto.arcor-online.net/palb/al...3364643230.jpg http://foto.arcor-online.net/palb/al...3337313633.jpg and now tell me what you think. Some better pics will come soon. Thorsten |
AMAZING. Just breath taking styrene work. The color looks great on that body. Looking forward to some updates. Keep it up. |
great work"thumbsup" |
Very amazing work.. I need to start doing some styrene work. |
"thumbsup"Your attention to detail is simply.... AMAZING:shock: |
| All times are GMT -6. The time now is 03:41 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com