12-22-2009, 10:18 AM | #1 |
I wanna be Dave Join Date: Nov 2009 Location: Houston
Posts: 2,004
| Mud Speed Truck I am thinking of ordering the new SCX10 Honcho kit and using an XL-5 with a Traxxas 2075 waterproof servo with either a 15T or 12T motor for speed. This will be nothing more than just a fast truck which I plan on mounting 1.9" mudslingers to without any weights. Will this servo hold up if I decided to use 2.2 mudslingers? Also what spur/pinion should I go with to not overheat the ESC or motor? |
Sponsored Links | |
12-22-2009, 10:28 AM | #2 |
I wanna be Dave Join Date: Mar 2009 Location: sittin in the sky
Posts: 4,630
|
id say a 27-30t motor with stock gearing does pretty good in the mud if yea up the voltage with a 3s lipo or 7 cell+ nimh but the traxxas stuff works pretty good for mud runners |
12-22-2009, 11:17 AM | #3 |
Quarry Creeper Join Date: Jul 2008 Location: Minot
Posts: 324
|
Komodo 19t on 11.1. |
12-22-2009, 11:17 AM | #4 |
Rock Crawler Join Date: Nov 2009 Location: Southern, IN
Posts: 862
|
you'll definitely want to run the nimh batts, since the XL-5 is rated at only 9.6volts it can't handle a 3s lipo plus last time i checked no one made a lipo cut off for it. only a warning light. and i would hate to trust using a light to keep from over discharging a battery. torque on th 2075 at 125oz should be plenty but it is digital so i think it has to be used with a tx/rx combo that is compatible.
|
12-22-2009, 12:17 PM | #5 |
Quarry Creeper Join Date: Nov 2006 Location: Reno
Posts: 320
|
I run a 27t on 11.1 in my mudder. But im using a EVX speed control from a Emaxx.
|
|
|