eric113's honcho flatbed now with portals Current Setup Front Axle Hot racing spool 3racing portal Traxxas bearings Traxxas stub shafts Gunnar custom pins Custom steering links Axial Cvd's Dynamite alum servo horn Axial clockable C's Axial HD 36/13 gears Rear Axle Axial HD stock gears Hot racing spool 3racing lock out 3racing portal Traxxas bearings Traxxas stub shafts Gunnar custom pins Axial 4 link mount Axial stock inner shafts Rolling Stock The Scale Shop "Trail ready" 1.9 wheels Fubar crawlers Delrin rings Crawler InNOVAtion's double deuce foams Rc4wd Rok Lox tires Full wrap weights Front wheels 4oz weight rear wheels Axial 1.9 wheels Fubar crawlers Delrin rings Crawler InNOVAtion's lil deuce foams Axial 1.9 ripsaws VP slw 225 hubs Full wrap weights front 4oz weight rear wheels MSD 1.9 wheels The ironworks/C.I. 1.9 4.75'' super swamper Crawler InNOVAtion's lil deuce foams Full wrap weights front 4oz weight rear wheels Transmission Robinson Racing Idler Gear Highlandcrawler steel pinned outputs BWD motor plate 16 tooth 48 pitch Robinson Racing pinion 87 tooth 48 pitch Axial Spur Gear Driveshafts Traxxas shafts Axial yokes Suspension RJ2 stainless steel links tapped 10-24 Traxxas revo rod ends Proline scale shocks - 50wt oil Rear 3racing MLST 66mm shocks- 60wt oil Chassis and Body Axial Scx10 chassis Hand Bro's Scx10 Cms kit Rc bros servo clamps DH fabrication flatbed DH fabrication sliders Home made front bumper RC Screwz stainless steel screws Axial Honcho cab Fattbatt electronics/winch tray Power and Control Holmes hobbies Br-xl Holmes hobbies torque master pro 25t Futaba S9156 steering servo Futaba 4PK Futaba R604FS RX Towerpro servo winch Heyok HV winch controller 800mah 40c & 1300mah 40c 4s sky lipos First I got say big thanks to BOWTIE for getting me the motor plate, outputs,cab. Thanks again Vato!"thumbsup" I started with putting a order into RPP hobbies from scx frame,axial trans case. The axles were already built from Honcho #1 http://www.compprocrawlers.com/album...0/DSCN5232.jpg Once I got the stuff to build the trans I put all the goodies to beef up the stock transmission. http://www.compprocrawlers.com/album...0/DSCN5238.jpg I contacted Dave @ DH fab after seeing a custom flatbed for honcho for sale. I knew had to have one. :mrgreen: Once I got the frame and bed and sliders from Dave I got it into roller. http://www.compprocrawlers.com/album...0/DSCN5239.jpg http://www.compprocrawlers.com/album...0/DSCN5240.jpg http://www.compprocrawlers.com/album...0/DSCN5241.jpg http://www.compprocrawlers.com/album...0/DSCN5242.jpg http://www.compprocrawlers.com/album...0/DSCN5245.jpg Showing how I mounted the rear shocks. http://www.compprocrawlers.com/album...0/DSCN5249.jpg http://www.compprocrawlers.com/album...0/DSCN5248.jpg http://www.compprocrawlers.com/album...0/DSCN5250.jpg |
I love that bed! Looks great!"thumbsup" |
starting to look good E! "thumbsup" how long before you have it running? |
Quote:
Quote:
I'm wanting to get this up and running asap! But budget is slowing me down. :cry: |
nice eric! love the bed! |
how does that rear shock setup work? u get enough flex outa somethin like that |
Quote:
Quote:
|
Looks sweet Eric! |
This looks great! Dave at DH fabrication has been turning out some very nice looking stuff."thumbsup" |
nice bed, I like it! I haven't decided on the dingo or honcho yet, if I go with honcho then I think i'll swap the bed |
Quote:
Quote:
Quote:
|
Lookin damn good Eric, I might have to try that shock idea on mine. You happen to know what shocks those are? Or at least what length? |
Quote:
Here the shocks I'm using. They 66mm long. I put a hex Traxxas rod end on. They super smooth! http://www.thetoyz.com/cart/thetoyz_...6594&cat_name= |
Very nice Eric! Great work Dave! |
Making little progress. Started on the front bumper. http://i850.photobucket.com/albums/a...3/IMAG0082.jpg http://i850.photobucket.com/albums/a...3/IMAG0083.jpg |
Lookin' real good, Eric! So are you building two rigs now? Just saw your custom chassis is coming home to you soon. :) BTW, BigT (Travis) is a buddy of mine. He's about to have a young'n in a week or so, but hopefully we'll all get together for some scale wheelin' soon. |
Quote:
It be while before both them are RTR. I still need alot for both them. Like everyone else money is short.:ror: |
the bed stinger look great! "thumbsup" give it a good home/ farm built rig! they look like the stuff we have been making in my ag welding class! |
Could you tell me how or where I can find one of those motor mount plates? Please:mrgreen: |
NICE! those shocks fit purfect! |
All times are GMT -6. The time now is 12:04 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com