KC's C2/G6 TJ BUILD...

[kaneohecrawler]

ok so yest i went to a spot to do some more testing... actually was jus playing with it lol... any who it took a 15-20 ft fall off a cliff. was worried it was goin in the ocean but didn thankfullly. the end result was a destroyed front bumper and a banana shaped rear lower link.. im almost glad it happened b/c it gave me a reason to make a few changes that i knew needed to be made
1- stonger front bumper base plate so that it would be more durable and be able to house a winch. old one was a lil tight.
2- shape the fender tubes more like the 1:1 the 1;1 has the hood trimmed so i did that and made the downward bend b4 the stinger...

also made the rear shock hoops super basic but this is my first rig brazing on..
lemme know what you think! good or bad

[NGreen]

Looks hell of a lot better man. Joints actually look, well, like they should! Gotta get a can of oven cleaner though so you can get rid of all that black and green anodized stuff.

For those who don't know what this rig is supposed to look like, here's the reference shots. KC is doing a pretty bang up job copying it.

[kaneohecrawler]

Thx Nick!!!

[ctrwannabe]

looking good man!! did you cut out the mounts for the shackle on the front bumper or are they like yoke ears ?

[kaneohecrawler]

Originally Posted by ctrwannabe

looking good man!! did you cut out the mounts for the shackle on the front bumper or are they like yoke ears ?

Thx bro!
I just cut a small piece of flat bar stock. Drilled a hole, rounded one side and brazed it on. Wan bam shackle mount.

[hoyt]

The new improvements look great. Really like that leaf setup and the brazing looks good for your first time. For a 15-20ft fall id say the rig held up great.

[Fowlboy]

That is SICK!!!!

[kaneohecrawler]

Originally Posted by hoyt

The new improvements look great. Really like that leaf setup and the brazing looks good for your first time. For a 15-20ft fall id say the rig held up great.

Thx its coming along slowly but surely. I only get so often to work on em but should have. A few days this week gonna try n bang out the main Cage.

[kaneohecrawler]

***UPDATE***

REMOVED THE BLACK ANODIZING FROM THE SHOCK BODIES AND PAINTED THE SPRINGS RED TO MATCH THE 1:1
THESE ARE THE RC4WD 110MM SCALE SHOCKS

1:1


1:10

[country_crawler]

Looks good!

[Erik R]

shocks look good, they don't look the same as everyone else's rc4wd shocks. rigs coming along cherry

[kaneohecrawler]

Originally Posted by country_crawler

Looks good!

THX Man

[kaneohecrawler]

Originally Posted by Erik R

shocks look good, they don't look the same as everyone else's rc4wd shocks. rigs coming along cherry

thx man that was the plan... UNIQUE****

[NGreen]

Your driver looks like....uhhh....nevermind, nothing positive to add. But the shocks look good. Did you sand them or use oven cleaner?

[kaneohecrawler]

Originally Posted by 53Guy

Your driver looks like....uhhh....nevermind, nothing positive to add. But the shocks look good. Did you sand them or use oven cleaner?

Wire wheel on the dremel. Driver was a test still searching for a suitable figure.

[kaneohecrawler]

This will be my driver ....
Gonna order him today
http://www.toywiz.com/avatarmilesquaritchdeluxe.html

[tazman]

Looks good! I would have about s@#t my pants if my rig took a fall like that!! At least it didn't go for a swim. Your brazing is looking better and better as you do more. Can't wait to see it at Pill Box!!

[kaneohecrawler]

My @$$ quenched up pretty good when it happened. Otherwise I probly would have!! Thx man I got Tom off if ur down..
PS. I burn myself less and less each time as well. Lol

[kaneohecrawler]

*****UPDATE*****

got some major progress done today the scaled cage is 90% complete just needs a few here and theres.

opinions please..... good or bad

1:1












[/QUOTE]

1:10

[CrawlinClodKiller]

I like it. Are you putting the windshield back on?