RCCrawler Forums

XSRCdesign · 08-21-2011, 09:17 PM

Quote:

Originally Posted by brianw

You wouldn't happen to have any body off shots of the completed rig do you? And where did that rear bumper come from, MSD?

Also figured out my wheelbase isn't what I thought it was.. It's a little longer. Guess there are 3 link sizes?

Quote:

Originally Posted by stelerzman

killler work in a short time. Could please give the H3 body wheel base and width. If its bigger than the D E silverado, i'll pick one up. Thanks.

Wheelbase is 11.5 and width is 7.25 at the fenders (about)

Finally fixed this thing after the Montana trip (except I didn't notice I need to get another deans plug) new spur, new pins in the drivelines, refreshed esc and a few new stickers.

And why not a few new pics.

Need to do something about that grill guard still..

brianw · 08-22-2011, 07:06 AM

Quote:

Originally Posted by exesivefire

Also figured out my wheelbase isn't what I thought it was.. It's a little longer. Guess there are 3 link sizes?

Wheelbase is 11.5 and width is 7.25 at the fenders (about)

Yeah, I measured my wheelbase yesterday and it's just about 11.5" as well. Thanks for the pic!

rocksteadily · 02-21-2012, 05:27 PM

I have a question about your shortened shocks. Did you, after replacing the shafts, have any issue with them
Leaking oil out of the bottom? Thank you

XSRCdesign · 02-21-2012, 09:03 PM

Quote:

Originally Posted by rocksteadily

I have a question about your shortened shocks. Did you, after replacing the shafts, have any issue with them
Leaking oil out of the bottom? Thank you

No I don't think so

rocksteadily · 02-21-2012, 09:33 PM

Quote:

Originally Posted by exesivefire

No I don't think so

Alight!! Thank you!! I have shortened scx shocks before but I just cut the shock shafts and re grooved it for c clip. This way seems way easier lol

YoUnG_vErSiOn · 02-21-2012, 09:35 PM

cute truck Andy, whats going under the hood? Ls7? "If i wanted a hummer..."

clock is ticking son.

Tommy R · 03-15-2012, 08:36 AM

Hey Andy, I saw you mentioned that you have another Maya Group H3 in your possession. Any interest in selling it? If so, just PM me.

XSRCdesign · 03-15-2012, 10:48 AM

Quote:

Originally Posted by Tommy R

Hey Andy, I saw you mentioned that you have another Maya Group H3 in your possession. Any interest in selling it? If so, just PM me.

I have two actually.. But in holding onto em

canadianbacon · 03-15-2012, 08:05 PM

I couldn't find it listed in the thread but, how tall are those tires while using 1.9's? The same size as listed on RC4WD's site? (4.13")

Tommy R · 03-16-2012, 06:43 AM

Quote:

Originally Posted by exesivefire

I have two actually.. But in holding onto em

Thanks... Figured it doesn't hurt to ask!

XSRCdesign · 03-16-2012, 12:46 PM

Quote:

Originally Posted by canadianbacon

I couldn't find it listed in the thread but, how tall are those tires while using 1.9's? The same size as listed on RC4WD's site? (4.13")

Should be the same

brianw · 03-17-2012, 08:33 AM

Mall crawler copycat. CAC 2.0s with 4.19" MTZs. Hit the outside with a matte clear to dull the yellow for now.

XSRCdesign · 06-20-2012, 04:27 PM

while fixing all my broken pic links I realized I never posted up after I finally painted the trim black again.

crap pic cause I don't have my camera at the moment but oh well.

brianw · 09-21-2012, 05:56 PM

this is still one of my favorites

XSRCdesign · 09-21-2012, 08:38 PM

Must be mine too cause I still own it

Can't wait for pitbull to get those 1.55s going. They will find there way on here for sure!

brianw · 09-21-2012, 08:52 PM

Quote:

Originally Posted by XSRCdesign

Can't wait for pitbull to get those 1.55s going. They will find there way on here for sure!

that's why I wanted a 1.25" wide tire!

XSRCdesign · 08-26-2014, 05:45 PM

I was poking around a LHS today and saw these Pitbulls, figured what the hell, might as well update the thing. tons of tiny screws later....

guess I gotta buy a matching spare now...

z71baja · 08-27-2014, 06:39 AM

Quote:

Originally Posted by XSRCdesign

guess I gotta buy a matching spare now...

That body looks killer....if you don't mind my critique, that spare looks kinda too big. Maybe a jerry can, highlift jack, and a shovel would fill that space better.

eitherway, cool rig

did you ever finish this sick @$$ build? i'm paypal ready

XSRCdesign · 08-27-2014, 08:04 AM

Eh, I don't mid the spare there, I do mind it doesn't match, I'll pull it off and see..

The other rig is still sitting on the shelf, I'll have to get back on it soon. Took a break from the hobbies for a bit. Picking back up now.

hotwheels000 · 08-27-2014, 08:24 AM

Good to hear you are building again ! Your builds are always top notch

02-21-2012, 05:27 PM	#83
rocksteadily RCC Addict Join Date: Mar 2009 Location: hawaii Posts: 1,139	Re: Project H3 (24 hour build time!) I have a question about your shortened shocks. Did you, after replacing the shafts, have any issue with them Leaking oil out of the bottom? Thank you

02-21-2012, 09:35 PM	#86
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: Project H3 (24 hour build time!) cute truck Andy, whats going under the hood? Ls7? "If i wanted a hummer..." clock is ticking son.

03-15-2012, 08:36 AM	#87
Tommy R I wanna be Dave Join Date: Aug 2008 Location: Austin, TX, USA Posts: 4,273	Re: Project H3 (24 hour build time!) Hey Andy, I saw you mentioned that you have another Maya Group H3 in your possession. Any interest in selling it? If so, just PM me.

03-15-2012, 08:05 PM	#89
canadianbacon RCC Addict Join Date: Dec 2007 Location: Moncton, NB, Canada Posts: 1,962	Re: Project H3 (24 hour build time!) I couldn't find it listed in the thread but, how tall are those tires while using 1.9's? The same size as listed on RC4WD's site? (4.13")

03-17-2012, 08:33 AM	#92
brianw RCC Addict Join Date: Jan 2010 Location: Barboursville, WV Posts: 1,448	Re: Project H3 (24 hour build time!) Mall crawler copycat. CAC 2.0s with 4.19" MTZs. Hit the outside with a matte clear to dull the yellow for now. Last edited by brianw; 03-17-2012 at 08:52 AM.

06-20-2012, 04:27 PM	#93
XSRCdesign I wanna be Dave Join Date: Aug 2005 Location: NE Ohio Posts: 8,817	Re: Project H3 (24 hour build time!) while fixing all my broken pic links I realized I never posted up after I finally painted the trim black again. crap pic cause I don't have my camera at the moment but oh well.

09-21-2012, 05:56 PM	#94
brianw RCC Addict Join Date: Jan 2010 Location: Barboursville, WV Posts: 1,448	Re: Project H3 (24 hour build time!) this is still one of my favorites

09-21-2012, 08:38 PM	#95
XSRCdesign I wanna be Dave Join Date: Aug 2005 Location: NE Ohio Posts: 8,817	Re: Project H3 (24 hour build time!) Must be mine too cause I still own it Can't wait for pitbull to get those 1.55s going. They will find there way on here for sure!

08-26-2014, 05:45 PM	#97
XSRCdesign I wanna be Dave Join Date: Aug 2005 Location: NE Ohio Posts: 8,817	Re: Project H3 (24 hour build time!) I was poking around a LHS today and saw these Pitbulls, figured what the hell, might as well update the thing. tons of tiny screws later.... guess I gotta buy a matching spare now...

08-27-2014, 08:04 AM	#99
XSRCdesign I wanna be Dave Join Date: Aug 2005 Location: NE Ohio Posts: 8,817	Re: Project H3 (24 hour build time!) Eh, I don't mid the spare there, I do mind it doesn't match, I'll pull it off and see.. The other rig is still sitting on the shelf, I'll have to get back on it soon. Took a break from the hobbies for a bit. Picking back up now.

08-27-2014, 08:24 AM	#100
hotwheels000 I wanna be Dave Join Date: Aug 2006 Location: under a rock and a hard place Posts: 5,443	Re: Project H3 (24 hour build time!) Good to hear you are building again ! Your builds are always top notch

Sponsored Links

RCCrawler Forums

Thread: Project H3 (24 hour build time!)