Project Resurrection After a misfortunate accident, my mildly modified SCX10 was lost in the Mississippi River, never to live again.:cry: A moment of silence please... However it's spirit will live on within "Project Resurrection". Being constructed entirely from plans and ideas of what I want in a scaler, here is my rough draft list: (subject to change) CHASSIS GCM Cross Canyon - on it's way 8) AXLES RC4WD T-Rex 60 - on their way 8) TRANSMISSION Axial AX10 Stainless out drive Steel Gears MOTOR Epic 45T - have it! "thumbsup" SPEED CONTROLLER Castle Creations Mamba Max - have it! "thumbsup" SHOCKS RC4WD 90mm Scale w/ boots LINKS Integy DRIVESHAFTS Integy STEERING SERVO TowerPro HD Servo - have it! "thumbsup" RADIDIO Spektrum DS3X - have it! "thumbsup" If any of you guys/gals have any other ideas of what would be cool on a scaler post it, and I will consider including it in my build. As always, I will keep this thread up to date with all the work I do as well as in video on Youtube "thumbsup" (user Bimmerben76, check me out!) |
Project Resurrection :Episode 1 http://youtu.be/oqRzNicHpGA Project Resurrection :Episode 2 http://youtu.be/0OCjvRR26Eo 8) |
Sorry about your loss, build sounds good,maybe some sort of flotation devise on this one just in case. |
Update on "Project Resurrection". Being constructed entirely from plans and ideas of what I want in a scaler, here is my updated parts list: (subject to change) CHASSIS GCM Cross Canyon - Have it! "thumbsup" AXLES RC4WD T-Rex 60 - Have it! "thumbsup" RC4WD Aluminum High Clearance Front Knuckles RC4WD XVD Front Shafts RC4WD Stainless Straight Shafts TRANSMISSION Axial AX10 Stainless out drive MOTOR Epic 55T - Have it! "thumbsup" SPEED CONTROLLER Castle Creations Mamba Max - Have it! "thumbsup" SHOCKS RC4WD 90mm Ultimate Scale Shocks - On their way! 8) LINKS Hand Made - Materials on hand! "thumbsup" Axial Link Ends - On their way 8) DRIVESHAFTS JunFac CVD STEERING SERVO TowerPro HD Servo - Have it! "thumbsup" RADIDIO Spektrum DS3X - Have it! "thumbsup" If any of you guys/gals have any other ideas of what would be cool on a scaler post it, and I will consider including it in my build. As always, I will keep this thread up to date with all the work I do as well as in video on Youtube "thumbsup" (user Bimmerben76, check me out!) http://i464.photobucket.com/albums/r...ler/Scaler.jpg http://i464.photobucket.com/albums/r...er/Scaler2.jpg http://i464.photobucket.com/albums/r...er/Scaler3.jpg http://i464.photobucket.com/albums/r...r/Scaler11.jpg http://i464.photobucket.com/albums/r...r/Scaler14.jpg http://i464.photobucket.com/albums/r...r/Scaler19.jpg http://i464.photobucket.com/albums/r...r/Scaler22.jpg http://i464.photobucket.com/albums/r...r/Scaler23.jpg http://i464.photobucket.com/albums/r...r/Scaler25.jpg http://i464.photobucket.com/albums/r...r/Scaler26.jpg |
nice progress mate "thumbsup", so when you say lost, do you mean you actually never got it back or it just died in the river and is being rebuilt? |
Quote:
|
Dude,just throw some fawking shorts on and jump in?? |
Update on "Project Resurrection". Being constructed entirely from plans and ideas of what I want in a scaler, here is my updated parts list: (subject to change) CHASSIS GCM Cross Canyon - Have it! "thumbsup" AXLES RC4WD T-Rex 60 - Have it! "thumbsup" RC4WD Aluminum High Clearance Front Knuckles - On their way 8) RC4WD XVD Front Shafts RC4WD Stainless Straight Shafts TRANSMISSION Axial AX10 - Have it! "thumbsup" Stainless out drive MOTOR Epic 55T - Have it! "thumbsup" SPEED CONTROLLER Castle Creations Mamba Max - Have it! "thumbsup" SHOCKS RC4WD 90mm Ultimate Scale Shocks - Have it! "thumbsup" LINKS Hand Made - Have um! "thumbsup" Axial Link Ends - Have it! "thumbsup" DRIVESHAFTS JunFac CVD - On their way 8) STEERING SERVO TowerPro HD Servo - Have it! "thumbsup" RADIDIO Spektrum DS3X - Have it! "thumbsup" If any of you guys/gals have any other ideas of what would be cool on a scaler post it, and I will consider including it in my build. As always, I will keep this thread up to date with all the work I do as well as in video on Youtube "thumbsup" (user Bimmerben76, check me out!) http://i464.photobucket.com/albums/r...r/Scaler28.jpg http://i464.photobucket.com/albums/r...r/Scaler29.jpg http://i464.photobucket.com/albums/r...r/Scaler30.jpg http://i464.photobucket.com/albums/r...r/Scaler31.jpg http://i464.photobucket.com/albums/r...r/Scaler34.jpg http://i464.photobucket.com/albums/r...r/Scaler33.jpg http://i464.photobucket.com/albums/r...r/Scaler27.jpg http://i464.photobucket.com/albums/r...r/Scaler32.jpg Episode 3 Episode 4 |
[QUOTE=bimmerben;3342283]Update on "Project Resurrection". Being constructed entirely from plans and ideas of what I want in a scaler, here is my updated parts list: (subject to change) CHASSIS GCM Cross Canyon - Installed "thumbsup" AXLES RC4WD T-Rex 60 - Installed "thumbsup" RC4WD Aluminum High Clearance Front Knuckles - Installed "thumbsup" RC4WD XVD Front Shafts - Still not available :cry: RC4WD Stainless Straight Shafts TRANSMISSION Axial AX10 - Installed "thumbsup" HR Alloy Housing - On The Way 8) Stainless out drive - On The Way 8) MOTOR Epic 55T - Installed "thumbsup" SPEED CONTROLLER Castle Creations Mamba Max - Installed "thumbsup" SHOCKS RC4WD 90mm Ultimate Scale Shocks - Installed "thumbsup" LINKS Hand Made - Installed "thumbsup" Axial Link Ends - Installed "thumbsup" DRIVESHAFTS JunFac CVD - Installed "thumbsup" STEERING SERVO TowerPro HD Servo - Installed "thumbsup" RADIDIO Spektrum DX3S - Installed "thumbsup" WHEEL/TIRE Pro-Line Flat Iron on HPI Stock Car - Installed "thumbsup" RC4WD X-Lock on HPI Stock Car - Have Um "thumbsup" Pro-Line Interco Swampers on HPI 6 Spoke - On The Way 8) If any of you guys/gals have any other ideas of what would be cool on a scaler post it, and I will consider including it in my build. As always, I will keep this thread up to date with all the work I do as well as in video on Youtube "thumbsup" (user Bimmerben76, check me out!) https://fbcdn-sphotos-a.akamaihd.net...38126167_n.jpg EPISODE V |
Update on "Project Resurrection" Constructed entirely from plans and ideas of what I want in a scaler. I have made a few runs with Rezzed since I "finished" it a couple weeks ago. I am not completely satisfied with the RC4WD T-Rex 60 axles so I found a set of axles from a Losi Comp Crawler to install. I was also very disappointed in the RC4WD Ultimate Scale Shocks so I replaced them with a set of HR 120mm shocks set up in a half droop/half sprung set up using smaller springs out of a pen. The smaller springs are strong enough to push the axles down when no weight is on them yet the weight of the truck keeps it down to the ground to keep c o g low. Also, instead of filling them with oil, they are simply greased, so they will work without all the mess.8) Other features include, chassis mounted steering servo, fully operational lighting, booted CV drive shafts, sealed and ventilated electronics box. The Parts List (subject to change) CHASSIS GCM Cross Canyon - "thumbsup" AXLES Losi Comp Crawler Worm Drive axles - On The Way 8) TRANSMISSION Axial AX10 - "thumbsup" HR Alloy Housing - "thumbsup" Stainless out drive - "thumbsup" MOTOR Epic 55T - "thumbsup" Axial 19T Pinion - "thumbsup" Axial 87T Spur - "thumbsup" SPEED CONTROLLER Castle Creations Mamba Max - "thumbsup" SHOCKS HR 120mm Shocks (greazed) w/ externally mounted Pen Springs - "thumbsup" LINKS Hand Made - "thumbsup" Axial Link Ends - "thumbsup" DRIVESHAFTS JunFac CVD - "thumbsup" STEERING SERVO TowerPro HD Servo - "thumbsup" RADIDIO Spektrum DX3S - "thumbsup" WHEEL/TIRE Pro-Line Flat Iron on HPI Stock Car - "thumbsup" RC4WD X-Lock on HPI Stock Car - "thumbsup" Pro-Line Interco Swampers on HPI 6 Spoke - "thumbsup" [B]BODY/ACCESSORIES[B] HPI 1979 Ford F-150 - "thumbsup" Pro-Line Rock Sliders - "thumbsup" Integy 4 Position Roof Lights - "thumbsup" RC4WD Bed Mount Spare Tire Rack - "thumbsup" HPI Front & Rear Bumpers - "thumbsup" Axial Chrome Light Set and Exterior Accessories - "thumbsup" Parma Off Road Sponsor Set - "thumbsup" If any of you guys/gals have any other ideas of what would be cool on a scaler post it, and I will consider including it in my build. As always, I will keep this thread up to date with all the work I do as well as in video on Youtube "thumbsup" (user Bimmerben76, check me out!) EPISODE 6 EPISODE 7 REZZURECTED MOVIE BLACK FRIDAY MOVIE ENJOY!! |
imo, lower that chassis down to get you a lower center of gravity - it will handle much better! if at all possible - move the shocks to the top of the shock hops that are molded into the frame - 4 screws and a test should give you a better idea. or at least to try it just to tinker. |
Update on "Project Resurrection" Constructed entirely from plans and ideas of what I want in a scaler. I have made a few runs with Rezzed since I "finished" it a few weeks ago. I was not completely satisfied with the RC4WD T-Rex 60 axles so I found a set of axles from a Losi Comp Crawler to install. They are geared very much lower than the standard ring and pinion axles, so I have swapped out the Epic 55T for a vintage Kyosho Ion Storm 27T. (you heard me, vintage! but it's been never used!) I also have a couple different pinion/spur gear combos to try out. I went back to the RC4WD shocks with some minor modifications. Swapped out the springs with lighter pen springs and removed the oil. They are now essentially drooped. Other features include fully operational lighting, booted CV drive shafts, sealed and ventilated electronics box. The Parts List (subject to change) CHASSIS GCM Cross Canyon - "thumbsup" AXLES Losi Comp Crawler Worm Drive axles - "thumbsup" TRANSMISSION Axial AX10 - "thumbsup" HR Alloy Housing - "thumbsup" Stainless out drive - "thumbsup" MOTOR Kyosho Ion Storm 27T - "thumbsup" Robinson 21T Pinion - "thumbsup" Axial 87T Spur - "thumbsup" SPEED CONTROLLER Castle Creations Mamba Max - "thumbsup" SHOCKS RC4WD 90mm Ultimate Scale w/light pen springs - "thumbsup" LINKS Hand Made - "thumbsup" Axial Link Ends - "thumbsup" DRIVESHAFTS JunFac CVD - "thumbsup" STEERING SERVO TowerPro HD Servo - "thumbsup" RADIDIO Spektrum DX3S - "thumbsup" WHEEL/TIRE Pro-Line Flat Iron on HPI Stock Car - "thumbsup" RC4WD X-Lock on HPI Stock Car - "thumbsup" Pro-Line Interco Swampers on HPI 6 Spoke - "thumbsup" [B]BODY/ACCESSORIES[B] HPI 1979 Ford F-150 - "thumbsup" Pro-Line Rock Sliders - "thumbsup" Integy 4 Position Roof Lights - "thumbsup" RC4WD Bed Mount Spare Tire Rack - "thumbsup" HPI Front & Rear Bumpers - "thumbsup" Axial Chrome Light Set and Exterior Accessories - "thumbsup" Parma Off Road Sponsor Set - "thumbsup" If any of you guys/gals have any other ideas of what would be cool on a scaler post it, and I will consider including it in my build. As always, I will keep this thread up to date with all the work I do as well as in video on Youtube "thumbsup" (user Bimmerben76, check me out!) |
Re: Project Resurrection WOW! After 12 years I've stumbled upon this old build thread. With all the knowledge and experience I have now, I'm amazed this truck worked at all. :oops: The link geometry was ALL wrong, it sat WAY too high and had tiny tires. |
All times are GMT -6. The time now is 07:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com