My Truggy I got this off of the forums here and I wanted to start a thread to document its progress. I have had it a week so far and like it but needs to be cleaned up a little bit. It came with: TLT axles derlin links bolt-on custom bed winch CC Sidewinder helix body Chassis mount servo I have added so far DNA Assassin wheels Proline Flatiron tires CC BEC Wiring cleaned up RC4WD remote/receiver Working cheap servo Woriking lipos I got a set of Axial axles I'm building for it but I got some stuff to order still before they go on. Some pics: http://i1087.photobucket.com/albums/...004_185509.jpg http://i1087.photobucket.com/albums/...007_223248.jpg http://i1087.photobucket.com/albums/...007_223311.jpg http://i1087.photobucket.com/albums/...006_215202.jpg |
Look's good,"thumbsup" I like that bed. |
Been doing some work on this rig and figured I'd do some updating: Switched to Axial axles. Mods are: Cvd's HD lockers HR knuckles and c hubs Axial aluminum rear straight lockers r2j 4 links mounts front and rear. Also Came with R2 tranny. Was missing dust cover and had a home made skid plate attached. I got the dust cover in today and switch to a RPP R2 skid plate. http://i1087.photobucket.com/albums/...020_222434.jpg Tore it down to just frame rails: http://i1087.photobucket.com/albums/...015_224056.jpg Sand blast time!! http://i1087.photobucket.com/albums/...021_083212.jpg http://i1087.photobucket.com/albums/...021_083726.jpg It had a broken weld so it was time for me to bust out the torch (I love fire! :twisted:). http://i1087.photobucket.com/albums/...021_110532.jpg Weld is all fixed up and I got my fire fix for the day as well. :twisted: http://i1087.photobucket.com/albums/...021_110540.jpg Got it primed and ready for base coat. http://i1087.photobucket.com/albums/...021_125957.jpg I still got a lot to do. The body is getting stripped and repainted also. I got a 7955 servo and a Holmes Hobby 35t hand-wound (both new) that I'm gonna drop in the rig. I am also switching to metal links and Integy piggyback shocks. More pics to come as soon as I make more progress. Thanks for looking James |
Nice work"thumbsup" |
Great tube work it came out reallly nice. |
this should turn out good. |
Thanks everyone. I have got more done and will post some more pics when I have more time. Thanks James |
I got the bed and bumper painted and mounted: http://i1087.photobucket.com/albums/...023_232210.jpg Decided to make my own links this time. I used 1/4" brake line, 10/24" all thread, and Revo rod ends. I drilled and tapped the rod ends. I also sandblasted the brake line. http://i1087.photobucket.com/albums/...024_183719.jpg http://i1087.photobucket.com/albums/...023_225558.jpg http://i1087.photobucket.com/albums/...024_183923.jpg I hope to have it as a roller in the next few days. I might have to adjust the length of my links before it is all said and done. Sorry for the crappy pics. The lighting is horrible in my house. Thanks for looking James |
nice! the links look great, where did you get the revo rod ends? |
Quote:
James |
All times are GMT -6. The time now is 03:33 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com