Mr. Ed's FJ-40 Landcruiser Well I've been talkin about building one of these forever and now it is a reality. As most of you know I sold the Bad Boy Sammi and took the money to buy all the parts for this build. As a kicker to all the vendors that helped out at the 3rd Annual Food Drive, 95% of all the parts I purchased were from Vendors who gave to our raffle that helped all those families. So as a big thanks to all of those vendors, and giving to raffles DOES promote future sales "thumbsup" I got the Donor rig from a buddy who dont EVER crawl so I traded some old Baby furniture that I WON'T ever use again. It's a pretty good deal for him cuz part of the deal was that if he gets to go crawlin, I have to provide him a rig :) It's basically a stock honcho but it had a Holmes Hobbies BRXL non- waterproof and my favorite Cobalt 27T motor thats a great little set up right there and it came with some lights too so I will transfer all of that. Now onto the goodies Donor Rig stock Honcho Motor Cobalt 27 Turn ESC Holmes Hobbies BRXL Servo Hitech 7954 Tires 1.9 proline super swampers from CKRC Rims 1.9 Mayhem slamerz from Mayhem of course! Body Tamiya FJ-40 Landcruiser from CKRC foams 1.9 crawler inovations dual stage Misc items Robinson Racing gears for the tranny from CKRC Venom knuckles and C's Castle creations BEC Venom drive shaft rings misc stickers from Bowtie |
Re: Mr. Ed's FJ-40 Landcruiser My Bad, were you guys wanting some goodie pictures? http://i542.photobucket.com/albums/g...IMAG0088-1.jpg http://i542.photobucket.com/albums/g...IMAG0089-1.jpg http://i542.photobucket.com/albums/g...IMAG0087-1.jpg http://i542.photobucket.com/albums/g...IMAG0084-1.jpg http://i542.photobucket.com/albums/g...IMAG0085-1.jpg http://i542.photobucket.com/albums/g...IMAG0086-1.jpg |
Re: Mr. Ed's FJ-40 Landcruiser Well after the holidayz I finally got some time to work on this rig. I've got the chassis redrilled to put the skid as close to the center of the chassis as possible so the links front and rear will be close to the same length. Basically I'm useing all of Sprint's R&D to set up this chassis because....well....that bronco is BAD AZZ! anyway. All the links were made out of 1/8th threaded rod with traxxas rod ends. I have some break line to cover them but that will be after all the mock up is done. I'm running the front 3 link with the rear 4 linked. Still a long ways to go but I'm getting there. http://i542.photobucket.com/albums/g...d/IMAG0135.jpg http://i542.photobucket.com/albums/g...d/IMAG0136.jpg http://i542.photobucket.com/albums/g...d/IMAG0137.jpg |
Re: Mr. Ed's FJ-40 Landcruiser This is the direction I'm going with this build. It's a friend of mines truck which I got to wheel in on several occassions. This build will bring back alot of my 1:1 days. It will not be exact and I'm going to make some minor changes. I'm going to build the Mr. Ed version of this truck "thumbsup" http://i542.photobucket.com/albums/g...ntitled-17.jpg |
Re: Mr. Ed's FJ-40 Landcruiser Well finally figured out how to mount the body. Took some all-thread 4-40 and welded it to the back of the frame and used some of those body pin holders and job done...Now that I got the body mounted I can get some more stuff done quicker. http://i542.photobucket.com/albums/g...IMAG0142-1.jpg And I'm looking at about 2.5 to 2.75 inches of wheel travel with Minimal tire rub http://i542.photobucket.com/albums/g...d/IMAG0143.jpg |
Re: Mr. Ed's FJ-40 Landcruiser Wow, look at that flex monster :ror: This should turn out awesome, I liked the way you did the Sammy. |
Re: Mr. Ed's FJ-40 Landcruiser Quote:
|
Re: Mr. Ed's FJ-40 Landcruiser Got my home made 4 link mount done....simply drill 2 holes in the factory servo mount and TAA_DAAA front 4 link :) http://i542.photobucket.com/albums/g...d/IMAG0145.jpg |
Re: Mr. Ed's FJ-40 Landcruiser Well Hammered out alot of the busy work tonight. Got the Robinson Racing gears installed. Mirrored the transmission while I was at it. Stripped the green off the Venom drive shaft rings and installed them. I used yellow can easy-off oven cleaner and let them soak about 10 minutes the wiped them clean with a rag. The set screws on these rings are very cheap, probally wont buy another set of the venom but the deal was good so I had too. Got the drive shafts built and the motor installed. Busy night but gonna call it. http://i542.photobucket.com/albums/g...d/IMAG0146.jpg http://i542.photobucket.com/albums/g...d/IMAG0147.jpg |
Re: Mr. Ed's FJ-40 Landcruiser Oh I've done it now :twisted: Too late not to just go with it! Plans gonna be changing BIG TIME!!!! http://i542.photobucket.com/albums/g...d/IMAG0154.jpg |
Re: Mr. Ed's FJ-40 Landcruiser Fj-45? |
Re: Mr. Ed's FJ-40 Landcruiser dang i was lookin forward to a 40. maybe a 40 with the hardtop off? |
Re: Mr. Ed's FJ-40 Landcruiser Well I guess i stared at it too long and started hacking on it. But yes it will be a FJ-45 ish...Not going to change the WB. I've never hacked and repaired lexan before so this should be a learning curve for me. Plus I can always just buy another 40 body and run it on the same chassis:ror: |
Re: Mr. Ed's FJ-40 Landcruiser Looking good so far Ed! "thumbsup" |
Re: Mr. Ed's FJ-40 Landcruiser Thanks for all the compliments:) Well here's what I had in mind. I have ALOT of touch up work to do but the lines are matching up quite well. My plan is to install the honcho tire carrier in the back...no cage. "thumbsup" http://i542.photobucket.com/albums/g...d/IMAG0156.jpg |
Re: Mr. Ed's FJ-40 Landcruiser So, does that make it an FJ 42.5? Sick build, keep it up. |
Re: Mr. Ed's FJ-40 Landcruiser Quote:
Here's the other half of my plan. A donated hocho flat bed! this should stiffen up the back side of my fj-42.5 :lmao1: whadda think? http://i542.photobucket.com/albums/g...d/IMAG0158.jpg http://i542.photobucket.com/albums/g...d/IMAG0157.jpg |
Re: Mr. Ed's FJ-40 Landcruiser So I'm starting to regret my hack body mod on the lexan. On my 3rd sand and primer on the roof and it's still visible. Gonna give it a few more shots but I may end up haveing to start over and not cut up the body. I will finish this project but it may turn into a live and learn body mod :( http://i542.photobucket.com/albums/g...d/P2170001.jpg http://i542.photobucket.com/albums/g...d/P2170003.jpg |
Nice looking build Ed... Maybe I can help in order to get rid of that body line take your dremel cut off wheel and cut 1/16 gap right on the seam across the roof then glue some styrene on the bottom side of it after that fill in your gap with icing,bondo, or green stuff whatever you're using after that you'll be able to sand the seam flush and it'll be smooth and look completely factory.. I hope this helps ive done it myself and if done right it'll work :) J-bird |
Re: Mr. Ed's FJ-40 Landcruiser well I hit a major bump in the road last night which will make it VERY hard to finish this by the Alabama run. While waiting on paint to dry I was useing metal shears to cut down the dummy screws for my MT Head beadlock rings........ http://i542.photobucket.com/albums/g...magejpeg_2.jpg So lets do the Math... Proline rims 3 free in trade proline rims 2 new $17.00 MT Head beadlock rings $14.00 Screws $35.00 Trip to ER $200.00 so thats $266.00 for the rims on this truck :shock: |
All times are GMT -6. The time now is 06:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com