1.9 Chevy SS Intimidator Truck spec are Body : - Chevy Dale Earnhard Hard Body ESE: - Castle Mamba Max Pro Motor: - 35t integy pro BEC: - Castle BEC Servo/Steer: - Savox 1260 Wheels: - soft 8 1.9 reversed Tire's: - 1.55 RC4WD Irok's Chassis: - Axial Scx10 Tranny: -RC4WD R2 Drive Shafts: - MIP Steering: - Hand Brother CMS kit pan hard/three link Rear Shock's: - Gear Head RC SCX10 Rear Shock Relocation Kit with 90mm Pro-Line power strocks Front Shock's: - Stock location 100mm RC4WD dual rate spring black Winch: - 3Racing with maddog scale line RC4WD fairlead and maddog scale hook Axle's: - Axial front w/ VP High Steer arms and Axial Aluminum C's Axial CVD's - Axial Rear w/ axial aluminum lock outs |
5 Attachment(s) Sent from my PC36100 using Tapatalk 2 |
3 Attachment(s) Pics of the chassis Sent from my PC36100 using Tapatalk 2 |
3 Attachment(s) Body pic's Sent from my PC36100 using Tapatalk 2 |
Re: 1.9 Chevy SS Intimidator looks good do you plan on adding anything to the body |
Re: 1.9 Chevy SS Intimidator Not sure yet |
Re: 1.9 Chevy SS Intimidator ohhhie this is gonna be nice! very well build rig you have there, thats a killer starting point! I like it stock..the body."thumbsup" |
Re: 1.9 Chevy SS Intimidator Nice start. I'll follow the chevy...cough cough. Did I say that out loud?"thumbsup" |
2 Attachment(s) Well set the body on it, Need to move the rear axle back a bit but other then that it looks good for the most part will do a lot more.... A few quick snap shot's this morning. |
Looking great so far, glad someone is building one of these in style:). Keep it up and looking forward to more. |
Re: 1.9 Chevy SS Intimidator Quote:
Thank you, I like the way it is looking so far. |
Re: 1.9 Chevy SS Intimidator Well I have been told to build it into the UA Z71... The only problem with that is I don't want to cut this body kind want to leave it alone and build a nice trail truck some thing you would see some high school kid driving LOL or my self or you every day joe. |
Re: 1.9 Chevy SS Intimidator Like the implementation of the shock relocate kit. Body is sick looking. I had the same problem. I don't think I have ever ran a un-cut body....but I couldn't bare cut this one. Keep her up. "thumbsup" |
Re: 1.9 Chevy SS Intimidator Quote:
ya think i am going to keep it stock body and build a street/drit road rider...lol |
Re: 1.9 Chevy SS Intimidator The full body does look killer. I have decided to keep the full cab on my build also. I ditched the shortened one and am using the full cab from my spare. Looks better and gives me the extra WB. tho I did cut the bed up. :( but it looks killer doves around my truggy cage. |
Re: 1.9 Chevy SS Intimidator chop it.... haha no man, it looks really nice! good work"thumbsup" |
5 Attachment(s) Well made a change 1.5 Irok's mount on the soft 8 reversed for more offset and a deep dish look also changed the shock set up to 110mm rc4wd fronts with a set of pro-line 90mm in the rear... |
Re: 1.9 Chevy SS Intimidator hopefully tonight I can finish building my body mounts and get a test run on it.. |
Re: 1.9 Chevy SS Intimidator what does the rear shocks being setup like that do for the ride? Is it appearance or performance? Curious because I've been debating on doing this to my scaler. |
Quote:
Sent from my PC36100 using Tapatalk 2 |
All times are GMT -6. The time now is 04:17 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com