Project Triple Threat JK...

[Mr. LowBudget]

LowBudget's Triple Threat JK...

Spec List...

- Axial SCX10 based
- Proline 4 door JK
- KMS K3 Servo Winch W/HeyOK Winch Controller
- Tekin FXR runing the winch
- Savox 500 oz. steering servo
- Mamba Max Pro ESC
- Tekin Redline PRO4HD 3000Kv
- Over Drives in the front Hardened in the rear
- Clock able Axial C's
- Axial High Clearance Knuckles
- MIP Drive Lines
- Axial Wraith Tranny W/Axial Dig
- CC BEC
- Losi steering upgrade
- Hand Bros. CMS W/Panhard bar
- Axial CVD's
- Custom leaf spring setup

[Mr. LowBudget]

Got the rear leaf spring set up done It seems like its going to work out really well, I hope

[racin707]

LB you are the man! Love watching your rigs come alive
Louie

From phone, spelling is phones fault

[Mr. LowBudget]

Originally Posted by racin707

LB you are the man! Love watching your rigs come alive
Louie

From phone, spelling is phones fault

Thanks man

[badBKO]

Are you going to be removing the rear coil springs off of the shocks? If not, I dont see a reason for adding leafs, then youd need to flip the leafs on the frame to do a 1/4 elipitcal setup.

[Mr. LowBudget]

Originally Posted by badBKO

Are you going to be removing the rear coil springs off of the shocks? If not, I dont see a reason for adding leafs, then youd need to flip the leafs on the frame to do a 1/4 elipitcal setup.

Nope, they are pretty much for the 3 scale points... They do ad a little more stiffness to the rig witch might help a little torque twist but other than that they are pointless But the 3 points will get the rig where i need it

[Mr. LowBudget]

Got a little work done on the JK today Got the bumpers built and the body mounted... Took some poser flex shots

[chris_snchez]

Nice build. Hope your rig will live with the Pro4HD I need to pick one of those up myself.

[DEynon]

What leaf spring kit it that. Could you pm me that info? Thinking of doing it myself.

[DonnieB]

You did a nice job on the flat fenders.....hope mine turn out that clean

[R2j]

Originally Posted by Mr. LowBudget

Nope, they are pretty much for the 3 scale points... They do ad a little more stiffness to the rig witch might help a little torque twist but other than that they are pointless But the 3 points will get the rig where i need it

This statement makes me feel a little uneasy, all be it a clever idea, to reward this set up would go against the intent of the rule and reward. However the committee is currently reviewing the verbiage. Please do not think that this set up is illegal, rather it does push the limit of the intended reward. Please feel free the PM me with any questions.

Shon

[R2j]

Thanks for the PM!

[Mr. LowBudget]

Originally Posted by DEynon

What leaf spring kit it that. Could you pm me that info? Thinking of doing it myself.

Thank you for your help R2j I sure appreciate the comments guys As for the leaf springs they are rc4wd TF 2 leafs and shackles...