RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   1.9 Scale Rigs (http://www.rccrawler.com/forum/1-9-scale-rigs/)
-   -   Yotapane's 2dr jk re-build thread (http://www.rccrawler.com/forum/1-9-scale-rigs/475913-yotapanes-2dr-jk-re-build-thread.html)

Yotapane 12-30-2013 06:45 PM

Yotapane's 2dr jk re-build thread
 
I've had my scx based jk for about two years and I figured it was time to go through it and finally build it to the level it deserves for all the years of of enjoyment it has provided me, it has been my go-to rig and has never let me down, so here's the earliest pic I have , it was after I had replaced the back. Half of the body. It started out as a 4dr new bright jk and I cut the entire body from the back line of the front doors and built the new rear section from .060 and 80 styrene, using tenax7r and q-bond it has been indestructible , no cracking or separations between the front and rear section of the body(many rollovers and drop offs at speed)the interior is trimmed to hide the stock axial trans under the dash . Trans is mounted in stock location, I built the custom center console to help tie in the front and rear body sections and I thought a little street truck touch would look nice. The seats are also stock new bright seats trimmed to clear trans, onto the before picshttp://i1234.photobucket.com/albums/...F2A7F-orig.jpghttp://i1234.photobucket.com/albums/...t/BD578044.jpg

Yotapane 12-30-2013 06:50 PM

Re: Yotapane's 2dr jk re-build thread
 
http://i1234.photobucket.com/albums/...0EAFC-orig.jpghttp://i1234.photobucket.com/albums/...2129F-orig.jpghttp://i1234.photobucket.com/albums/...5ADF8-orig.jpg

Yotapane 12-30-2013 06:59 PM

Re: Yotapane's 2dr jk re-build thread
 
I built the front bumper and roll cage using 3/16" solid rod and a miller mig, came out nice and clean, And have proved to be as solid as I thought they'd be here's a few more progress pics since doing the half door conversion and starting to fill in the little chips and dings to prep for a fresh start, let me know what you all think...http://i1234.photobucket.com/albums/...1388454900.jpghttp://i1234.photobucket.com/albums/...1388454937.jpghttp://i1234.photobucket.com/albums/...1388454970.jpg

Yotapane 12-30-2013 07:13 PM

Re: Yotapane's 2dr jk re-build thread
 
Pics from tonight , got the orange laid down sorry for the crap pics, tomarrow the silver two tone and interior will be matte grey Finnish and black accents, http://i1234.photobucket.com/albums/...1388455792.jpghttp://i1234.photobucket.com/albums/...1388455729.jpghttp://i1234.photobucket.com/albums/...1388455761.jpg

oleminer 12-30-2013 07:36 PM

I really like this jeep great build

Sent from my HTC6435LVW using Tapatalk

Yotapane 01-03-2014 11:57 PM

Re: Yotapane's 2dr jk re-build thread
 
A little more progress and a few pics of all my distractions, way too many irons in the fire, and still have the lil green tj on its way back...http://i1234.photobucket.com/albums/...1388818121.jpghttp://i1234.photobucket.com/albums/...1388818165.jpg

Bananaclip 01-04-2014 12:46 PM

Re: Yotapane's 2dr jk re-build thread
 
Hell of a stable you have mr yp!"thumbsup"

oleminer 01-04-2014 03:53 PM

I really really like this jeep lol

Sent from my HTC6435LVW using Tapatalk

Yotapane 01-05-2014 12:46 AM

Re: Yotapane's 2dr jk re-build thread
 
Quote:

Originally Posted by oleminer (Post 4613815)
I really really like this jeep lol

Sent from my HTC6435LVW using Tapatalk

Thanks"thumbsup", I've always liked the little jeeps you've built, especially the one that has two front clips......no reverse penalties lol

Yotapane 01-05-2014 12:48 AM

Re: Yotapane's 2dr jk re-build thread
 
Quote:

Originally Posted by Bananaclip (Post 4613604)
Hell of a stable you have mr yp!"thumbsup"

Why thank you mr clip. I've thinned them out a little today, can't wait to finish the 2dr and start on the 4dr got from you, thanks for the kind words

boosted4lyf 01-05-2014 01:17 AM

Re: Yotapane's 2dr jk re-build thread
 
Lookin good man, and I got an email today the tj is there in yreka"thumbsup"

Yotapane 01-05-2014 06:37 PM

Re: Yotapane's 2dr jk re-build thread
 
Sweet

Yotapane 01-06-2014 01:03 PM

Re: Yotapane's 2dr jk re-build thread
 
Quote:

Originally Posted by ROCKCRAWLIN (Post 4616229)
Looking good!

Thanks! I'll be adding some graphics between the silver and orange tonight, then 6 coats of clear, the colors wil pop so nice, should look like its a piece of candy that's on fire!

Yotapane 01-06-2014 04:10 PM

Re: Yotapane's 2dr jk re-build thread
 
Got the simple tj back today, doubt I'm gonna get the jk done tonight.....

boosted4lyf 01-06-2014 04:22 PM

Re: Yotapane's 2dr jk re-build thread
 
Send the jk on down here :ror:

Yotapane 03-02-2014 08:11 PM

Re: Yotapane's 2dr jk re-build thread
 
After a severe lack of packing material and extreme Kik boxing tournament at USPS the jk ended up playing boomerang and ended up back in my hands... I repaired a lot of flaws and am having more fun with it than I ever have..http://i1234.photobucket.com/albums/...1393802383.jpg special thanks going out to middleman for the chance to get my jk back home ...

kaneohecrawler 03-02-2014 08:40 PM

Re: Yotapane's 2dr jk re-build thread
 
Lookin good ryan!

Yotapane 03-02-2014 08:47 PM

Re: Yotapane's 2dr jk re-build thread
 
http://i1234.photobucket.com/albums/...1393816461.jpghttp://i1234.photobucket.com/albums/...1393816431.jpg


All times are GMT -6. The time now is 09:50 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com