Arnel's 2DR Started this a while ago, but here's some pics to date. In the beginning. Got the mayhems from Travis aka kaneohcrawler with the r35 treps. Picked up the body sprayed some paint on it, started trimming the fenders, and welded up a front bumper. http://i18.photobucket.com/albums/b1...psipxfbydx.jpg Which is just a dummy. At this point. |
Re: Arnel's 2DR Used some 3/16" styrene tube, heated with a heat gun and dremel a slot in the back to fit over what remained of the fender on the body. http://i18.photobucket.com/albums/b1...ps20539ba8.jpg Threw some black paint on em. And made some body armor for the sides http://i18.photobucket.com/albums/b1...pssnbtl8dj.jpg |
Re: Arnel's 2DR Close up of the side, I plan on replacing the hardware with stainless here soon. http://i18.photobucket.com/albums/b1...psoulaz3xd.jpg |
Re: Arnel's 2DR Started workin on my sliders, and wanted more of a step look to em so I came up with these http://i18.photobucket.com/albums/b1...psckmrvmb5.jpg http://i18.photobucket.com/albums/b1...psyflgu9z6.jpg |
Re: Arnel's 2DR No room for the servo winch in the front so I made an aluminum plate in the rear and bent up some brake line as a line guide. http://i18.photobucket.com/albums/b1...ps0g7ekbzv.jpg http://i18.photobucket.com/albums/b1...psff1f7ggb.jpg |
Re: Arnel's 2DR Mounted up some LEDs I made: http://i18.photobucket.com/albums/b1...psphgnx961.jpg http://i18.photobucket.com/albums/b1...psofjqt6un.jpg |
Re: Arnel's 2DR Made my dollar store fender wells from some Tupperware and sprayed them with plastidip http://i18.photobucket.com/albums/b1...psobwdy066.jpg |
Re: Arnel's 2DR Welded up a rear tire carrier. : http://i18.photobucket.com/albums/b1...psl3oykgj0.jpg And threw on a roof rack my son isn't going to use anymore http://i18.photobucket.com/albums/b1...psrrawfqta.jpg |
Re: Arnel's 2DR Nice setup you got going. Im gonna end up having to do a rear mount winch like that cauee i have zero room left anywhere else on my rig.. uhgg.. loks great tho bid keep it up! |
Re: Arnel's 2DR Thanks Travis! Yeah I just need a more powerful servo now this Vaterra servo struggles, but then again I rarely use it anyways. I should have my re machined trailready rings today or tomorrow |
Re: Arnel's 2DR looks good arnel now post up the tundra on my thread |
Re: Arnel's 2DR Can't find your thread Kevin lol |
Re: Arnel's 2DR Arnel -- thank you so much for sharing a build thread on this rig. I had seen a couple of pics in other threads, but was hoping to see more. What I really appreciate is you accomplished an amazing looking Jeep without much welding, brazing or other metal work. It makes such a build more attainable for those of us without welding equipment or brazing skills. The fender treatment with 3/16 rod is especially creative and well done. Definitely one of my favorite Jeeps on RCC. Steve |
Re: Arnel's 2DR Steve- the side plates for the body are made from tin plated steel, you get two sheets for a couple bucks at any hobby store and they can be cut with a pair of good scissors. Light weight and simple :) |
Re: Arnel's 2DR Changed up the rings to the re machined Tr rings and threw in some iroks I got from 322 aka Paul. Not sure how I'll like the tires on here, but noticed my back end is a little heavy due to the tire carrier http://i18.photobucket.com/albums/b1...psgqm79gy5.jpg |
Re: Arnel's 2DR Just stiffen the rear a little bit. Looks pretty sweet. |
Re: Arnel's 2DR I'll stiffen it with a long chassis taking up room on my bench! |
Re: Arnel's 2DR Quote:
|
Re: Arnel's 2DR I swear I'll get it cut eventually haha |
Re: Arnel's 2DR Get zion23 to leave me alone lol |
All times are GMT -6. The time now is 02:54 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com