Go Back   RCCrawler Forums > Scale Rigs General Tech > 1.9 Scale Rigs
Loading

Notices

Thread: SeyZilla! IFS Ultra chassis modded

Reply
 
LinkBack Thread Tools Display Modes
Old 08-29-2014, 05:20 PM   #1
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default SeyZilla! IFS Ultra chassis modded

Hello guys...
I'm working a lot on 3 truck at time....
Some Italian friends were askin me why I didn't share the mods that I'm making on the awesome Ultra Chassis made by Mattzila alias Lue.

I'd like explain that nothing was wrong on the chassis, but I always like to do something different then the others truck...so.....

Le'ts have a look.....

The chassis arrived on last march and in a few days was like this....








Was great... But not enough for me

So I've started with this..


Tested the front of a twin hammer..


That was perfect ....
I've made a little mock up with a thin cast iron plate to find the measures of wb and to understand if everything was at the right place...










The stance was perfect..


So I took a currie vp axles that was taken previously for my hilux a put at the back


Put the amazing raceline wheels by rc4wd in 1,9 inch size tha are the best look for an ultra style rig






After a few measures....


seychelles is offline   Reply With Quote
Sponsored Links
Old 08-29-2014, 05:28 PM   #2
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

I've installed a mod plate in cast iron made by my friend Maxbonv that is especially made for the twin H. For relocatin the shocks ,the servo with ball bearings bell crank steering system...



Sorry for this two poor quality pics













seychelles is offline   Reply With Quote
Old 08-29-2014, 05:32 PM   #3
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Finally yesterday I've started to make the real slide, 2mm iron thick, with some boat slide on lateral side...




Today I made the holes at fixed definitively the front...


That's all for now.. Stay tuned....
seychelles is offline   Reply With Quote
Old 08-29-2014, 05:32 PM   #4
RCC Addict
 
Join Date: Dec 2012
Location: Crookston
Posts: 1,868
Default Re: SeyZilla! IFS Ultra chassis modded

Very cool build. Subbed
Ballistic17 is offline   Reply With Quote
Old 08-29-2014, 05:36 PM   #5
Rock Crawler
 
Join Date: Aug 2012
Location: 909 area
Posts: 936
Default Re: SeyZilla! IFS Ultra chassis modded

Very sick I need one of those plates lol
kakachille is offline   Reply With Quote
Old 08-29-2014, 05:47 PM   #6
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Quote:
Originally Posted by LeeSc10 View Post
Very cool build. Subbed


Quote:
Originally Posted by kakachille View Post
Very sick I need one of those plates lol
If it fits nice, as I suppose I can scan and send to yup the files an measures so someone can make for you.. I think is the best way... Or if you can you just take some iron and make... But you have to be very patient ....
seychelles is offline   Reply With Quote
Old 09-04-2014, 10:14 AM   #7
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Made,last holes...


and.....



















A few pics but just for testin' the measures.... I'll finish braze the upper link mount and the rear shock mount and the rig will be a roller
seychelles is offline   Reply With Quote
Old 09-04-2014, 10:23 AM   #8
RCC Addict
 
Join Date: Dec 2012
Location: Crookston
Posts: 1,868
Default Re: SeyZilla! IFS Ultra chassis modded

That is looking awesome. Very nice work.
Ballistic17 is offline   Reply With Quote
Old 09-05-2014, 01:39 AM   #9
Pebble Pounder
 
Join Date: Sep 2009
Location: Heart of the Alps
Posts: 119
Default Re: SeyZilla! IFS Ultra chassis modded

Amazing build, Sey!
tomster is offline   Reply With Quote
Old 09-05-2014, 12:22 PM   #10
Newbie
 
Join Date: Nov 2012
Location: Sweden
Posts: 48
Default Re: SeyZilla! IFS Ultra chassis modded

That's the reason why I love the hobby, imagination is endless! what's the length of the trailing arm? I am also thinking of putting them on my future mattzilla ultra4 chassis ^^
pelucas is offline   Reply With Quote
Old 09-14-2014, 05:19 PM   #11
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Quote:
Originally Posted by LeeSc10 View Post
That is looking awesome. Very nice work.
Quote:
Originally Posted by tomster View Post
Amazing build, Sey!
Quote:
Originally Posted by pelucas View Post
That's the reason why I love the hobby, imagination is endless! what's the length of the trailing arm? I am also thinking of putting them on my future mattzilla ultra4 chassis ^^
Tks guys , Pelucas i'll give you the measure....

here we are...
Made some upper link stay..





From some steel tube...


Upper mount links...



When you find the right shims and the right grease....
A small test for a fast rig...
D400878D-D166-4EF9-999F-2E8367D9E575.mp4 Video by scaler4you | Photobucket

I'm very proud... The measures and the work is great... The spool stay always in the same angle... That's happen when your work is well
In extension


Compressed...


New ammo stay..


Brazed upper e trail arm links mounts...





definitive triangulations..






Poser pics







Is not far to be a roller
seychelles is offline   Reply With Quote
Old 09-15-2014, 04:39 AM   #12
I wanna be Dave
 
Join Date: Dec 2006
Location: Where the sheep run scared.
Posts: 3,008
Default Re: SeyZilla! IFS Ultra chassis modded

Beautiful build brother! You did one hell of a job on your belly pan!
Bananaclip is offline   Reply With Quote
Old 09-16-2014, 02:54 AM   #13
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Thks banana...I'm workin on the tranny and front now!
seychelles is offline   Reply With Quote
Old 09-22-2014, 03:06 PM   #14
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Im waitin for the new traxxas bellcrank, so i can put the servo inside the cabin.... Hope the rpp package will arrive soon....
Without that i won't go fwd with placing the tranny... Is a shame...
By the way ... Hope I can give some more good news guys
seychelles is offline   Reply With Quote
Old 09-23-2014, 08:39 AM   #15
Quarry Creeper
 
Join Date: Aug 2010
Location: Varese - Italy
Posts: 319
Default Re: SeyZilla! IFS Ultra chassis modded

Hi Francesco,
your works are always very interesting

I'm sorry that I can not provide a 90 ° steering, my standard parts are designed
specifically for the Twin Hammers
maxbonv is offline   Reply With Quote
Old 09-23-2014, 11:38 AM   #16
I wanna be Dave
 
Join Date: Sep 2005
Location: Dirty South
Posts: 4,064
Default Re: SeyZilla! IFS Ultra chassis modded

I love the IFS builds . I like how you did the skid plate . I will be watching for pics of the bell crank setup . I'm working on a IFS project myself . Badd's IFS JK buggy
Badd is offline   Reply With Quote
Old 09-23-2014, 01:31 PM   #17
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Quote:
Originally Posted by maxbonv View Post
Hi Francesco,
your works are always very interesting

I'm sorry that I can not provide a 90 ° steering, my standard parts are designed
specifically for the Twin Hammers
Thanks Max for the kind words... Your twin hammer parts are awesome... I remember last year with the twin just build I placed 2 just for a bunch of seconds.... Your kit worked as hell

Quote:
Originally Posted by Badd View Post
I love the IFS builds . I like how you did the skid plate . I will be watching for pics of the bell crank setup . I'm working on a IFS project myself . Badd's IFS JK buggy
Hello Badd, thks, I've taken an iron steel plate of 2mm thickness, I've traced with the original plate of a twin to get the front design and holes for the front diff... Lately I made the lines to bend the lateral parts to have a flat belly with some slides at the edges... That's all... But I made hundreds measures to get the right wheelbase ... If you have a bit patience you'll make without big efforts
I'm going to see your rig also.. Keep lookin for next upgrades....
My best wishes are that I'd like to put at the back the new rc4wd motor that will be released soon
If you want to see it, check Harley page on the tube at the last rc4wd Escs challenge
seychelles is offline   Reply With Quote
Old 03-22-2015, 03:17 PM   #18
Rock Crawler
 
Join Date: Jul 2008
Location: Pearland, TX
Posts: 595
Default Re: SeyZilla! IFS Ultra chassis modded

Bump, were you ever able to finish this up? Started out super cool!
WesTX is offline   Reply With Quote
Old 12-31-2015, 07:04 PM   #19
Quarry Creeper
 
Join Date: Jun 2012
Location: Rome, Italy
Posts: 384
Default Re: SeyZilla! IFS Ultra chassis modded

Quote:
Originally Posted by WesTX View Post
Bump, were you ever able to finish this up? Started out super cool!
Not yet my friend....
Lot of rigs to finish... But i will... Just a lot of things to do and so little time
seychelles is offline   Reply With Quote
Old 01-01-2016, 07:57 AM   #20
I wanna be Dave
 
Join Date: Dec 2006
Location: Where the sheep run scared.
Posts: 3,008
Default Re: SeyZilla! IFS Ultra chassis modded

You are building some top shelf rigs right now my brother! I love how you are taking this to the next level of greatness. Awesome work
Bananaclip is offline   Reply With Quote
Reply



SeyZilla! IFS Ultra chassis modded - Similar Threads
Thread Thread Starter Forum Replies Last Post
Trialpsycho's Ultra 4 Ifs Rock racer trialpsycho 1.9 Scale Rigs 7 09-05-2014 07:17 PM
IFS Wraith Army: #4 Redrum Ultra RusT808 Axial Wraith 26 11-11-2012 12:58 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 03:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com