|
| LinkBack | Thread Tools | Display Modes |
09-06-2014, 08:17 AM | #1 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Mattzilla Ultra4 2014 build from down under - codename "Gojira" ************************************************** PHOTOBUCKET ACCOUNT HAS BEEN DELETED ALL BUILD IMAGES NOW AVAILABLE AT THE BELOW LINK https://1drv.ms/f/s!AnBE1r1npITclvggOswhve9n47hgmg ************************************************** Hi all thought it time i started a build thread... There is a growing interest in U4RC in Australia with several builders undertaking the process to get rigs built with a view to kicking off this series down under. The process will be slow but we're officially running under the U4RC.com banner and will be building rigs to meet the class regulations for that series. This thread will be a build and progress thread of my 1.9 based rig built on the Mattzilla U4 2014 chassis. * Edit* Here's a sneak peak at the final build at its first U4RC race Last edited by mce076; 07-05-2017 at 09:15 PM. |
Sponsored Links | |
09-06-2014, 08:25 AM | #2 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
Some photos that Lue sent me throughout the process of the build.. Last edited by mce076; 09-06-2014 at 08:28 AM. |
09-06-2014, 08:37 AM | #3 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
so while the chassis was being built i started out purchasing some items that would be needed.. - SuperShafty "Bomb Proof" transmission with 6mm extended chromoly outputs - Vanquish Wraith Scale Knuckles and Chubs - MIP 6mm outputs - MIP AX10 splined drive shafts * non-dig version - GripFab Lockers * to be used in the 2.2 Mantis G2 build to come And i got hold of an Axial Yeti fuel cell... And some more goodies that arrived in a different order... - LockedUp RC F1 Spools - LockedUP RC OT2 rear axle shafts - Axial underdrive and standard HD gear sets - Axial SCX10 axle housings - Axial 4 link truss - RCScrews stainless screw kit - Axial standard clamping hex hubs - Team FastEddy bearings |
09-06-2014, 08:45 AM | #4 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
so with some of the parts that had arrived it was time to get the build on... there were a couple other items that arrived as well, like the RCBros aluminium burly tubes.. shown here installed with the Wraith scale knuckles/chubs... messed around with product shot style photos of the XR10 unis mounted into the Wraith scale knuckles/chubs.. and the Team FastEddy bearing kit to be used... then i started work on the rear axle... and could only get this far as i was waiting on the Vanquish rear lockouts.. |
09-06-2014, 08:51 AM | #5 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
so i had the Wraith skid plate arrive and i set about mounting the SuperShafty bomb proof trans to it.. the Tekin ROC412 3100kV motor was also a nice suprise that turned out just in time to join in the fun as well... and then i attached the MIP drive shafts... and then started playing around with attaching the front and rear axles.. |
09-06-2014, 08:52 AM | #6 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
More parts arrived.. - HPI Apache C1 cockpit painted - Pit Bull Rock Beasts I couldnt resist mocking up the driveline with drivers then some of the Robinson Racing 32P pinions arrived so i had to mount one up to the trans.. |
09-06-2014, 08:57 AM | #7 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
And then a Vanquish motherload arrived... - VP Wraith Servo mounts and clamps - VP OMF 1.9 rims w/ Phase 5 beadlock rings - VP rear lockout - VP Wraith Ti steering link in both standard and racing ackerman * to be used in MZ Mantis G2 build And clearly i had to mount up one of the rims to the Pit Bull Rock Beasts... |
09-06-2014, 08:59 AM | #8 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
Did some more research, spoke to some nice people and ended up ordering one of the DCW Wraith link riser full kits.. |
09-06-2014, 09:04 AM | #9 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
And then it arrived... OMG OMG OMG OMG ! In this package was the following from Mattzilla.. - MZ U4 2014 chassis - MZ Mantis G2 chassis But here's the U4 chassis as the Mantis will be for a later build thread.. The workmanship here is quite amazing and a testament to Lue's hard work and skills. There is nothing i can fault its just pure awesome and now that its here I am going to enjoy every last bit of the build. Thanks heaps Lue for your time to build these chassis for me And of course a couple minutes later i had bolted up the skid with trans hehe.. i could not wait, my fingers were itching to do it lol Last edited by mce076; 09-06-2014 at 10:26 AM. |
09-06-2014, 09:10 AM | #10 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
Now begins the phase where I test mount up everthing and work out what i need to do from here on in. I also discovered some tweaks that will need to be made to what i had ordered (which was pretty much done blind). Axles, shocks, skid, battery, fuel cell.. all test mounted.. Playing around with the front links.. Cutting the driver figures and squeezing them inside the chassis... Made some really dodgy rear links and discovered drive shaft was too long... Weighed the chassis as it stands now... started to mount up the Yeti fuel cell properly.. and you can also see an idea on how to attach the spare tire using the nut that was conveniently welded there.. underneath the rear screw for the fuel cell cover i glued on a 3mm nut which you cant see, but this is how it looks attached.. |
09-06-2014, 09:12 AM | #11 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
And here is where i am going to take a breather, collect my thoughts, work out any small issues and plan the next phase A lot has been done in a couple days! |
09-06-2014, 01:47 PM | #12 |
I joined the Band! Join Date: May 2009 Location: lake county ,florida
Posts: 1,237
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
Quick progress there. Everything looks great with quality parts used.
|
09-06-2014, 03:12 PM | #13 |
RCC Addict Join Date: Dec 2012 Location: Crookston
Posts: 1,868
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
Very nice build. |
09-06-2014, 04:43 PM | #14 |
Quarry Creeper Join Date: Dec 2011 Location: Gold Coast, Australia
Posts: 290
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
This is going to be an amazing build mate, can't wait to see it progress!
|
09-06-2014, 11:57 PM | #15 | ||
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira" Quote:
i will give you though that once the chassis arrived i have made some fairly quick progress out of being stupidly keen to get started on this beast Quote:
there's a lot to do from here, some of which will involve new things that i have not attempted before in a build myself | ||
09-06-2014, 11:58 PM | #16 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
3/16" black P-clips should be useful for something on this build like attaching the Exo radiator set behind the cab |
09-07-2014, 01:16 AM | #17 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
very minor progress on the build, have test mounted the unpainted Exo radiator with the 3/16" P-Clips and it seems to work ok... will need either longer clips to reach the sides or some other way of tighting it so it wont swing around too much not sure which i prefer, but I'm leaning to the angled look on the radiator.. Last edited by mce076; 09-07-2014 at 06:46 AM. |
09-07-2014, 01:34 AM | #18 |
RCC Addict Join Date: Dec 2012 Location: Crookston
Posts: 1,868
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
I like the angled look also.
|
09-07-2014, 03:40 AM | #19 |
Rock Crawler Join Date: Jan 2013 Location: Australia
Posts: 607
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
i agree, it definitely looks better, and the whole thing looks so sick it deserves what is right haha |
09-13-2014, 12:58 AM | #20 |
Quarry Creeper Join Date: May 2010 Location: Perth, Australia
Posts: 225
| Re: Mattzilla Ultra4 2014 build from down under - codename "Gojira"
small progress on this build.. i've started to play with the idea of making body panels and to learn a process that i am comfortable with.. for me, it seems the easiest is this method.. - cut a piece of clear plastic larger than the area needed - mark out the panel nut centers - drill the holes - attach the rough piece to the chassis with screws - using a ruler and marker pen, draw a line along the center of the bar work - remove panel and cut to on the lines the clear plastic here is actually a binding sheet cover from an office supplies shop as it was cheap and didnt waste the good lexan sheets.. although i will plan on having these cut from sheet aluminium and skinned afterwards.. |
Mattzilla Ultra4 2014 build from down under - codename "Gojira" - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Scale 2 build and progress - codename "Colonel Mustard" | mce076 | Axial SCX-10 | 39 | 11-05-2014 05:30 AM |
801rcc 2014 Ultra4 and Trail, Event #9 "Descent into Darkness" | NaZ-T | Competitions | 1 | 09-26-2014 01:37 PM |
801rcc 2014 Ultra4 and Trail, Event #8 "Elevated Chaos" | NaZ-T | Competitions | 2 | 07-31-2014 07:33 PM |
801rcc 2014 Ultra4 R/C, Event #6 "Dusted Desert 600" | NaZ-T | Competitions | 3 | 07-01-2014 07:02 PM |
801rcc 2014 Ultra4 R/C, Race #1 "Rock Rail Express" | NaZ-T | Competitions | 10 | 01-18-2014 03:49 PM |
Thread Tools | |
Display Modes | |
| |