|
| LinkBack | Thread Tools | Display Modes |
11-18-2015, 09:06 AM | #1 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Project Christmas Hilux "Twuggy"
My 4 year old son always looks at my phone when I'm on RCC and he wanted his own "twuggy" for Christmas. He's been bashing an old Honcho all summer so it's time to get going on this for him. I did some trading and wound up with a Speedweigand chassis and a Hilux cab. He loves the pinched nose cabs so I thought I would give it a shot. It was learning experience but thanks to searching threads on here I think it's coming along pretty good. I have a few more layers of filler to get it just right. Found a couple cab backs so had to put one on too Here's how it looks so far. Sent from my SM-G900V using Tapatalk |
Sponsored Links | |
11-18-2015, 09:55 AM | #2 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy"
The chassis was made for a clod cab so the front bumper was getting in the way. A little meeting with the chop saw took care of the problem. Once I get ready for the final powdercoat I'll tack on a stinger. I wanted a different look in the front so I'm going to mount a 4" light bar under the hood to replace the grill Sent from my SM-G900V using Tapatalk |
11-18-2015, 10:46 AM | #3 |
Pebble Pounder Join Date: Jun 2015 Location: Smethport
Posts: 148
| Re: Project Christmas Hilux "Twuggy"
Awesome project for your son. I like the light bar/grill. It fits there nicely
|
11-18-2015, 10:57 AM | #4 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy"
Thank you! The problem is he usually helps me work on trucks at night so I have to work on this one after he goes to bed. I have to hide the parts so he doesn't see them Sent from my SM-G900V using Tapatalk |
11-19-2015, 06:26 AM | #5 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy"
I'm still waiting on some parts for the front axle. So far I have -Creation Fab short splined delrin tubes -KillerKustomz shortend shafts -VP knuckles and chubs Sent from my SM-G900V using Tapatalk |
11-19-2015, 09:34 AM | #6 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy"
The light bar would be in the way if I wanted to mount a winch on the bumper so I'm going to improvise. I'm planning on converting a 7950 to a servo winch and I'll mount it on a custom cms/winch plate. For now I picked up some 1/4" rubber grommets. I'm on the look out for some hard rubber/plastic ones. Just drill a 1/4" hole through the bumper... Place your grommets in and your done. I plan on switching to a harder compound due to pressure from the winch line. line Sent from my SM-G900V using Tapatalk |
11-19-2015, 06:54 PM | #7 |
Quarry Creeper Join Date: Jul 2009 Location: UTAH
Posts: 427
| Re: Project Christmas Hilux "Twuggy"
Looking good buddy. I like the light bar idea.
|
11-19-2015, 06:57 PM | #8 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy" |
11-19-2015, 07:12 PM | #9 |
Pebble Pounder Join Date: Nov 2013 Location: Bath,ME
Posts: 159
| Re: Project Christmas Hilux "Twuggy"
Looks great so far! That's gonna be the ultimate Christmas present. |
11-19-2015, 08:54 PM | #10 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: Project Christmas Hilux "Twuggy"
Good luck hiding the build. I almost got caught building my son's blizzard. I was tinting the windows and he walked in but didn't see it.
|
11-19-2015, 08:56 PM | #11 | |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy" Quote:
Sent from my SM-G900V using Tapatalk | |
11-19-2015, 08:58 PM | #12 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: Project Christmas Hilux "Twuggy"
Mines in the living room.
|
11-19-2015, 08:58 PM | #13 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy" |
11-20-2015, 09:46 AM | #14 |
Quarry Creeper Join Date: Dec 2009 Location: San Jose
Posts: 265
| Re: Project Christmas Hilux "Twuggy"
What?!?! Can I pass along my dad's email address so you can make him make me a new truggy? I'd prefer a Tundra but hey, beggars and all that jazz... but yes, please hit my old man and tell him to get to workin!! In all seriousness, that's just the coolest gift. My son took over my SCX10 and I moved on to a new Wraith project when he wanted the SCX for himself...nothing like this awesomeness though!! |
11-20-2015, 10:01 AM | #15 | |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy" Quote:
Originally I had a new Deadbolt RTR (in the for sale section now) he was going to get. Then I thought about the things my dad has made for me over the years and how much more they meant to me than an off the shelf item. Two things in particular come to mind... The first was a discharge light set up for my NiMh batteries back in the day. The second was a snowplow for my Clodbuster. Over the years I've bought and sold many RC items but I still have the discharge lights, snowplow, and Clodbuster sitting on the shelf. Sent from my SM-G900V using Tapatalk Last edited by fatcalves; 11-20-2015 at 10:03 AM. Reason: Info | |
11-20-2015, 10:15 AM | #16 |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy"
This was my first time pinching and putting a cab back in. It was actually fun to do. I'm pretty happy with the results. I probably went overboard on the reinforcement inside the cab but I'd like it to hold up. With this being for a child I didn't think conventional paint would be the proper choice. I am going with the matte black hood of course. Getting the mask lines in place You'll notice over spray on the rest of the body but with what I'm going to do next it won't matter. I'll update next week with the end results. It won't be everyone's cup of tea but I'm hoping it turns out as good on the body as I was planning... Sent from my SM-G900V using Tapatalk |
11-20-2015, 10:37 AM | #17 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: Project Christmas Hilux "Twuggy"
You son will be proud of his dad's work . I can just hear him telling his friends.
|
11-20-2015, 10:43 AM | #18 |
RCC Addict Join Date: Mar 2013 Location: Commerce Township
Posts: 1,594
| Re: Project Christmas Hilux "Twuggy"
Just a "pinch" of awesomeness....sorry, couldn't resist, great job, that's not easy to do.
|
11-20-2015, 04:24 PM | #19 |
RCC Addict Join Date: Apr 2010 Location: Outdoors
Posts: 1,137
| Re: Project Christmas Hilux "Twuggy"
Pretty sure you can't go overboard reinforcing a hard body for a 4yr old. Sweet gift for sure! are you spraying it with bedliner? |
11-20-2015, 08:32 PM | #20 | |
Newbie Join Date: Nov 2010 Location: Milford
Posts: 38
| Re: Project Christmas Hilux "Twuggy" Quote:
Nope its not bedliner! Sent from my SM-G900V using Tapatalk | |
Project Christmas Hilux "Twuggy" - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
PROJECT: "My First Hilux"...TRUGGY | ser3100 | 1.9 Scale Rigs | 13 | 07-28-2011 09:41 PM |
Project***"hawaiian Sun" Toyota Hilux | scale808 | 1.9 Scale Rigs | 26 | 06-16-2009 09:40 AM |
Thread Tools | |
Display Modes | |
| |