Scarlett a c2 anorexic

[jthellfire911]

Well after alot of research and help from toyzuki I too pulled the trigger on his full setup.
Parts list
Scx10 axles short xr10 front
Axial HD od front gears
Brass beef tubes front
Vp scale wraith knuckles
Vp clamping c hubs
Vp locker
Vp vvd hybrid universals scx shaft, wraith stub axles
Rear scx10 axle
Strc lockouts and hd shafts
Axial hd stock ratio gears
Holmes spool

Trans
Toyzuki lcg motor mount, and the case with hr 1 piece lower gear with integrated outputs
Full fast eddy bearings

Vp 1.9 omf wheels wrapped in gold klrs with klr foams

Proline scaler shocks front and rear
Custom links front and rear
Limit straps f/r

Mmp
Holmes puller pro stubby 540 3300kv
Hitec 7950 servo
Juggernaut servo winch
Heyok hv winch controller
Dx4s
Ccbec
Custom y harness to put 7.4v directly to the servo
All electronic besides the heyok winch controller have been waterproofed by Hellfire Waterproofing Systems.

Ford proline f250 honcho cab
Custom metal flat bed, sliders, f/r bumpers
Will have 3d Interior 4 seats,
Aluminum 4 seat interior cage

I'm shooting for right at 50 scale points with this build, and hopefully be under 7lbs rtr.

I moved the skid forward and ran into issues with my roc412 hitting the drivelines so I ordered the hh 540s puller pro. Then had an issue getting all of my links right since I moved the skid. Got all that figured out, made the Panhard ect. Put my home built servo winch in and the new locked up spool hit everything. So I ordered a juggernaut servo winch.

[jthellfire911]

Full suspension compression and barely clears!

All tube work is dom and is done by Nathan rooney

[jthellfire911]

Well no turning back now! Hate to cut up an amazing chassis, but needed the shocks more forward in the rear. Nathan is doing a damn good job!

[Bluerock108]

Looks like it's going to be a great truck.

Sent from my SM-T330NU using Tapatalk

[VMGontheRocks]

Coming along nicely!

What's your wheelbase at?

Also, are the hybrid VVDs the same length as the cut down XR shafts?

[jthellfire911]

Originally Posted by VMGontheRocks

Coming along nicely!

What's your wheelbase at?

Also, are the hybrid VVDs the same length as the cut down XR shafts?

Should be right at 12.3 or a little longer. And yes on the shafts. They are scx10 inner shafts with wraith stub axles. Giving you a non cut up shaft and awesome xr10 mod.

[jthellfire911]

Originally Posted by Bluerock108

Looks like it's going to be a great truck.

Sent from my SM-T330NU using Tapatalk

Thank you!

[THUG LIFE]

Looks like its going to be a great looking rig. Good looking tube work.

[jdmguy760]

Originally Posted by jthellfire911

Should be right at 12.3 or a little longer. And yes on the shafts. They are scx10 inner shafts with wraith stub axles. Giving you a non cut up shaft and awesome xr10 mod.

Really I'd like to see a pic of this

Sent from my SM-N920T using Tapatalk

[VMGontheRocks]

Originally Posted by jthellfire911

Should be right at 12.3 or a little longer. And yes on the shafts. They are scx10 inner shafts with wraith stub axles. Giving you a non cut up shaft and awesome xr10 mod.

That's a good wheelbase!

Right on, I'd heard of doing that but never seen someone do it.

[jthellfire911]

Originally Posted by VMGontheRocks

That's a good wheelbase!

Right on, I'd heard of doing that but never seen someone do it.

Beeftubes offers them that way now. Check out their fb page.
I got mine from vp. Had to call and special request them.
Same price as scx vvds.

[jthellfire911]

Originally Posted by jdmguy760

Really I'd like to see a pic of this

Sent from my SM-N920T using Tapatalk

That's the only pic I have of them.

[jdmguy760]

OK so here's where I'm lost how does the wraith cup on the scx shaft give it more steering then just high steer and cvds on a regular scx

Sent from my SM-N920T using Tapatalk

[jthellfire911]

Originally Posted by jdmguy760

OK so here's where I'm lost how does the wraith cup on the scx shaft give it more steering then just high steer and cvds on a regular scx

Sent from my SM-N920T using Tapatalk

Yes. It allows you to run xr10 modded front axle. Wraith c hubs and knuckles.

[Bananaclip]

Beast! That bed looks so much like flat bed Fred.........

[jthellfire911]

Originally Posted by Bananaclip

Beast! That bed looks so much like flat bed Fred.........

Hahaha yup! I received Ryans approval before hand! It'll be getting a lexan bed like fred, and interior floor like fred.

[Bananaclip]

Well, I couldn't think of a better rig to copy. Long live Fred

[jthellfire911]

Originally Posted by Bananaclip

Well, I couldn't think of a better rig to copy. Long live Fred

One of freds more healthy and stout illegitimate children. Haha

[jthellfire911]

I forgot to post, but before the chassis went to my buddies house I built an interior aluminum cage.

[VMGontheRocks]

Originally Posted by jthellfire911

Beeftubes offers them that way now. Check out their fb page.
I got mine from vp. Had to call and special request them.
Same price as scx vvds.

That's awesome! I'm totally calling up VP for a set!