Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Hello all! I am just in the process of starting my FJ Cruiser build using RC4WD Gelande II kit. The rear leaf springs will mount to the axle easy enough using 2mm & 3mm metal spacers since the rear axle has nice round notches for round spacers to fit. Front axle is a little different than most other guys I have seen do the leafs on! I think I got a newer axle and it seems solid cast! They didn't include the nice little notches so now what to do? Should I cut my spacer flat to fit? I am not sure if I want to dremel any parts of the axle housing. Here are pics of the axle area. See how the holes where the bolts for the leaf springs go are? I actually didn't even pay attention until I was tightening down the leaf with round metal spacer and was like what the?? https://farm2.staticflickr.com/1466/...9722ac44_c.jpg https://farm2.staticflickr.com/1682/...c969ab1c_c.jpg |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help If you doing a spring under setup, looks like you will need to break out the dremel. |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Yes I am doing a spring under. I will dremel my spacers I guess? I am a dummy and thought the spacers would be the same on the front as the rear. 2mm & 3mm on rear. I cut a 3mm with a nice flat spot and then realized it is too small. I have to use 4mm & 5mm on front to have leafs mount as flush to axle as possible and also give a decent angle for the driveshaft. Oh the learning curve for a newbie! Now I wait for 5mm spacers. In Canada we have to wait for all good RC parts. Even more so in my super tiny town with no LHS! I am using RC4WD sapcers because I couldn't get a decent shipping deal from other vendors. :( |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help I got the fronts mounted after hacking the spacers with a dremel. Not pretty but will work. I will post pics later. It really isn't pretty but works and I need to touch up the black axles with paint now. :) I guess. LOL |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Looks good to me. I filed flat spots on the axle tube to give a place for the leafs to sit flat. Your way will work too especially if you're not using u-bolts. |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Looks like you're coming along well. For what it's worth, I did a step-by-step how-to thread with leafs over axle a little while back. Your solution on leafs under axle works well, as would U bolts. Here's the link to mine if it helps: http://www.rccrawler.com/forum/1-9-s...e-chassis.html |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Thanks guys and I will be reading more threads and taking in all the info. I am grateful to have this community and a couple others for knowledge. I am totally new to building anything beyond a basic kit with bolt on parts. I am scared of customizing because I don't have all the right tools, skills & money to go hardcore. |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help I used a piece of nylon rod I had around that happen to be drilled out to just the right size. I notched one end with the dremel to fit . Then cut to length. 5, or 6 mm, cant remember.I temporarily glued them in place with CA, the filed down to match the top of the axle. I will see if I have any pics. |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Yeah I don't have the luxury of nylon rods. I was crazy and bought the metal spacers. They are working out decent enough for me. Pics would be cool to see! I love pics always! It helps wrap my brain around the situation better. |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Quote:
"thumbsup""thumbsup""thumbsup""thumbsup""thumb sup" |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Quote:
Lol. One of my regular running mates gives me grief about Revolvers pretty regularly for that same reason. You can easily substitute Bruiser shackles for the Revolvers and otherwise follow the same steps if you want. As for the fear of modifying, most of us have been there at some point. My first several scale builds were all bolt-on in part for that reason, and I remember the deep breath I had to take when I first took a saw to the interior of my D110. Modification and fabrication can sound like scary words at first, but they're really not. If you've used a Dremel or drill on any part, you've modified something. If you've used any sort of raw material to make or modify any part, you've done fabrication. Once you get over the psychological hurdle, you'll find that you open a lot of doors in your builds and get an even greater sense of satisfaction from them. And the good news is that there are virtually no parts in this hobby that can't be replaced cheaply if you mess up during a build. "thumbsup" |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Quote:
|
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help Aren't Yota II's reversible? Leave the housing with mounts down and reverse the hubs and internals. I don't have Yota II's, but it seems like it should work, maybe I'm wrong. |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help I got the leafs mounted. I guess if I have any further issues I might flip stuff but I want to keep it the way it is. Fingers crossed for future success. It is a super slow project for me due to skills, parts and funds. :) |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help I was thinking couldn't the bruiser U Bolts be used to do leaf under? Would be more realistic if it would work. |
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help No idea and I don't want to spend anymore money right now. This works for now. :) "thumbsup""thumbsup" Quote:
|
Re: Starting to do a leaf conversion on Gelande II for Cruiser but need advice. Help How did you end up finalizing the installation? I’m still working on mine and have the driveshaft right up against the transmission. Also having an issue with the placement of the steering stabilizer in the axle over configuration. |
All times are GMT -6. The time now is 09:03 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com