| |
04-25-2016, 04:22 PM
| #1 |
| Newbie Join Date: Sep 2011 Location: middleboro
Posts: 14
|  Servo horn
Okay so question I can't seem to find what im looking for I have an scx10 with the ssd d60 axles and the ssd cms with panhard with aluminum c hubs and vanquish high steer knuckles. Issue I'm running into is the tie rod is running into the servo horn screw. I'm looking for a horn that will be tighter to the servo. Any leads ?
|
|  |
| Sponsored Links | |
| | |
|
05-03-2016, 11:21 AM
| #2 |
| RCC Addict Join Date: Nov 2008 Location: Frederick
Posts: 1,286
| Re: Servo horn
The blue aluminium one that comes with the Hitec servos is petty small. Can you put a bend in the tie rod? Post some pics.
|
|
| |
|
05-03-2016, 01:11 PM
| #3 |
| I wanna be Dave Join Date: Sep 2006 Location: Anchorage, Alaska
Posts: 3,099
| Re: Servo horn
any room to thread the screw - link on the backside of the horn ? is it an aluminum servo horn - threaded ? if so... fore go the nut and use blue locktite and use a shorter screw that doesn't protrude. You could also use a low profile nut (non-nylock) and locktite that so it won't come loose. |
|
| |
|
05-03-2016, 01:27 PM
| #4 |
| I wanna be Dave Join Date: Jan 2005 Location: Raleigh-ish vicinity
Posts: 3,846
| Re: Servo horn
I used the Tekno servo horn to gain clearance between the panhard and servo horn on my Ascender.  Tekno RC Aluminum Single Sided Clamping Servo Horn (25T) [TKR5253B] | Parts - AMain Performance Hobbies |
|
| |
 |
Servo horn - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| OFNA Servo Horn stout enough for Protek 170T Servo? | Banjoblue | Axial Wraith | 2 | 06-25-2015 05:30 PM |
| hitec servo glitching and a servo horn question | m1009cucv | Electronics | 5 | 08-18-2012 11:22 AM |
| |
Linear Mode
