Maniac
 

I cant believe I have to try to write this all over. Went to my photo bucket and some how I hit something and deleted the hole tread now I'm doing it over.:flipoff: So lets try this again.:lmao:

scx10 frame
axial axles with beef tubes and steel gears
vanquish transmission with steel gears
castle side winder 3
35 turn motor
savor 1230 steering servo


I took a scx10 frame cut it towards the rear boxed it in. Took some of the scx10 frame made some ears so I could put aluminum axial knuckles for the pivot point. I had to use 8 bearing to make this work the reason I had to use so many because it kept coming apart. I had to put bearings inside of bearing so it would stay together took me a minute to figure this one out.
Took axial shocks cut them down and I had a set of hpi shocks laying around I took the rod out from the inside of them and put them in the scx10 shocks cut the stock scx10 springs down to fit. Worked great and I was still able to put oil back in them.
Everything worked out great buuuuuuuut I have to much torque twist so now I have to figure out a way to make some resistance in between them. So ill have to use a small shock or something. Has about a 13 1/4'' wheel base. Its a single seat front and back what a ride the passenger is going to have:lmao: Took a long time to bend and weld this all up.Has 1.9 wheels and tire but I think I'm might change them. I don't like the paint thought it was flat green its not I'm probably going to change the color. I think I covered everything.


http://i163.photobucket.com/albums/t...psogazvmcp.jpg

http://i163.photobucket.com/albums/t...psp7zxgsch.jpg

http://i163.photobucket.com/albums/t...ps1kjbahdc.jpg

http://i163.photobucket.com/albums/t...pssjamk3tu.jpg

http://i163.photobucket.com/albums/t...ps3qwoqvtj.jpg

http://i163.photobucket.com/albums/t...psskshuvka.jpg

http://i163.photobucket.com/albums/t...ps9gynyriv.jpg

http://i163.photobucket.com/albums/t...pscyx4pe9e.jpg

http://i163.photobucket.com/albums/t...psk6glq26r.jpg

http://i163.photobucket.com/albums/t...psqgehl8hr.jpg

http://i163.photobucket.com/albums/t...pss1h7cve2.jpg

http://i163.photobucket.com/albums/t...ps78zarc9m.jpg

http://i163.photobucket.com/albums/t...psfhbvztmy.jpg

http://i163.photobucket.com/albums/t...psl4mximti.jpg

http://i163.photobucket.com/albums/t...psgpzssafs.jpg

http://i163.photobucket.com/albums/t...psmi1s71jy.jpg

http://i163.photobucket.com/albums/t...pscosegnom.jpg

http://i163.photobucket.com/albums/t...pskxjylbnl.jpg

http://i163.photobucket.com/albums/t...ps2jrca645.jpg

http://i163.photobucket.com/albums/t...psazlf05gc.jpg

http://i163.photobucket.com/albums/t...psb5oux8ck.jpg

http://i163.photobucket.com/albums/t...pshqwyoyn1.jpg

http://i163.photobucket.com/albums/t...psvtsoers0.jpg

http://i163.photobucket.com/albums/t...pshlczdcxw.jpg

http://i163.photobucket.com/albums/t...psgsbsrwc7.jpg

http://i163.photobucket.com/albums/t...ps6mpf22bx.jpg

http://i163.photobucket.com/albums/t...ps0l2uwqcr.jpg

http://i163.photobucket.com/albums/t...psuafhlfmo.jpg

http://i163.photobucket.com/albums/t...pszlez0kz6.jpg

http://i163.photobucket.com/albums/t...pshewaixtm.jpg

http://i163.photobucket.com/albums/t...ps7tir4pot.jpg

http://i163.photobucket.com/albums/t...pszrr1akt7.jpg

http://i163.photobucket.com/albums/t...psfsiuwz3r.jpg

http://i163.photobucket.com/albums/t...pskybfbnb2.jpg

http://i163.photobucket.com/albums/t...psij5fz39h.jpg

http://i163.photobucket.com/albums/t...psrfzllwho.jpg

http://i163.photobucket.com/albums/t...psl8qqmvdv.jpg

http://i163.photobucket.com/albums/t...psl50s3afq.jpg

http://i163.photobucket.com/albums/t...ps47eofn29.jpg

http://i163.photobucket.com/albums/t...ps2ejauqpd.jpg

http://i163.photobucket.com/albums/t...psb7myzygh.jpg

Re: Maniac
 

Sweet but we will need a video of this crawling.

Re: Maniac
 

That's bad ass. Love the swivel chassis like the old power wagons.

Ya gotta make a video. I wanna see it working.

Nice build!

Re: Maniac
 

I'm going to get a vid soon as I get it working right.

Re: Maniac
 

OK I THINK I GOT IT I TRYED TO PUT THE SHOCKS IN THE CENTER BUT IT DIDNT SEEM TO WORK RITE. I PUT THEM UP LIKE THAT AND TOOK THE SHORT SPRING OUT AND PUT A LONG ONE BACK IN ITS PLACE SO NOW IT HAS TWO LONG SPRINGS IT SEEMS TO BE WORKING GREAT IN THE GARAGE BUT WE KNOW WHAT HAPPENS WHEN YOU HIT THE ROCKS DIFFRENT STORY ILL KNOW IM GOIMG TO TRY IT OUT SOMETIME TOMORROW.

http://i163.photobucket.com/albums/t...pslgs6q8bo.jpg

http://i163.photobucket.com/albums/t...ps6lwxhwwp.jpg

http://i163.photobucket.com/albums/t...psfenzukha.jpg

http://i163.photobucket.com/albums/t...ps6bghslvm.jpg

http://i163.photobucket.com/albums/t...pstdftuyjo.jpg

http://i163.photobucket.com/albums/t...psmuqlavvq.jpg

http://i163.photobucket.com/albums/t...pss3ugq3pt.jpg

Re: Maniac
 

GOT SOME MORE DONE LOOKING FOR A PASSENGER AND I REPAINTED IT.

http://i163.photobucket.com/albums/t...psrekcqyic.jpg

http://i163.photobucket.com/albums/t...pshtwnr13v.jpg

http://i163.photobucket.com/albums/t...psnpympcc4.jpg

http://i163.photobucket.com/albums/t...psluckr5nk.jpg

http://i163.photobucket.com/albums/t...psidkda5x4.jpg

Re: Maniac
 

Found him at Walmart the figurers are called. THE CORPS ELITE

Re: Maniac
 

Build looks good. I have a couple of his buddies driving my rigs. Can't go wrong for $4 bucks.

Re: Maniac
 

Very clever, and easily one of the more unique builds here "thumbsup"

Re: Maniac
 

Dang, that's definitely unique. I'd love to see some video of it in action. Nice!

Re: Maniac
 

I'm hopping to get some vid soon on this thing. I'm trying to find some more of them guys so I can put one in the back. They sell them at Walmart but I haven't seen anymore yet.

Re: Maniac
 

You can see it on it's first outing in this club video. (Before the recent changes.)

<iframe src="https://www.youtube.com/embed/3anUGLToXeM" allowfullscreen="" width="560" height="315" frameborder="0"></iframe>

Re: Maniac
 

SORRCAs head just exploded :ror:

Re: Maniac
 

Really far out! Great work bringing it all together.

Re: Maniac
 

Not trying to thread jack but this build reminds me of another my friend did. He was told it wouldn't be sorrca legal.

http://www.rccrawler.com/forum/team-losi-comp-crawler/483846-another-losi-scaler-left-hand-path.html

Sent from my SM-G935V using Tapatalk

Re: Maniac
 

Very Cool!
I love builds like this!

Re: Maniac
 

Do a search for "Swivel Frame Power Wagon Build", build thread by OlYelr back in 2007

Re: Maniac
 

None of the pics work in that thread. :cry:

Re: Maniac
 

I seen the video a few days ago and your rig really caught my eye. I've always liked odd and different builds and yours is one of the more unique ones well done.

I've made a few odd ones myself but stopped posting them, just got sick of all the negative comments from people that find it hard to think outside the box.

Once again , well done"thumbsup"

Re: Maniac
 

It does a lot better now with the shocks on it. It will stay on its wheels now