scx10 restoration project part2 !!
 

Hello everyone , it’s me again jccrawler. After last time’s wheels upgrade , its time for the axles.
I choose to replace the rear axles first , since it’s easier and I was kinda busy. Anyway, let’s start the restoration.

So these are the Sentinel Axle housing
https://scontent.fhkg1-1.fna.fbcdn.n...e4&oe=5959096B
https://scontent.fhkg1-1.fna.fbcdn.n...63&oe=5998EBF4

I lay them down for a clearer shot
https://scontent.fhkg1-1.fna.fbcdn.n...c4&oe=595BB8F7

The old rear axle, Man they are worn out. All scuffed up.
https://scontent.fhkg1-1.fna.fbcdn.n...e0&oe=599A1598
https://scontent.fhkg1-1.fna.fbcdn.n...dd&oe=596277C2
I disassembled and found out some dirt got into the axle housing .
https://scontent.fhkg1-1.fna.fbcdn.n...39&oe=596257C6

So I clean them out and re grease them.
https://scontent.fhkg1-1.fna.fbcdn.n...bd&oe=595EA68A
https://scontent.fhkg1-1.fna.fbcdn.n...5c&oe=5964E31F
https://scontent.fhkg1-1.fna.fbcdn.n...69&oe=5995EA82
https://scontent.fhkg1-1.fna.fbcdn.n...93&oe=59599017

Now this how it came out!!
https://scontent.fhkg1-1.fna.fbcdn.n...42&oe=5953C336
It looks so nice and feels so solid!!
https://scontent.fhkg1-1.fna.fbcdn.n...bf&oe=595A3236
https://scontent.fhkg1-1.fna.fbcdn.n...7e&oe=595CBDEB

This isn't the end , so stay tune
So what do you guys think?
Don't know if it is as good as VP axle housings. But it doesn't feel cheaply manufactured

Re: scx10 restoration project part2 !!
 

They look some what scale versus the stock housings