Ballistic17's Cbercfab Tundra
 

This will be my new C2 rig for 2018. I will be using the Cbercfab Switchblade chassis with a custom rear cage from K.I.S.S. Fab on Facebook. Scx10ii axles, 3d printed forward motor mount printed by Powershift Rc, Boom Racing transfer case, Vaderproducts high clearance skid and gMade RSD scale shocks. I'm sure more parts will be included as I go. But that's the list so far.
https://uploads.tapatalk-cdn.com/201...d96f44f0c6.jpghttps://uploads.tapatalk-cdn.com/201...a1c81e83ee.jpghttps://uploads.tapatalk-cdn.com/201...0b9394da11.jpghttps://uploads.tapatalk-cdn.com/201...a7cb336a43.jpghttps://uploads.tapatalk-cdn.com/201...d683553481.jpghttps://uploads.tapatalk-cdn.com/201...ba62db3979.jpghttps://uploads.tapatalk-cdn.com/201...d0d39d9ec2.jpghttps://uploads.tapatalk-cdn.com/201...013d6fce31.jpghttps://uploads.tapatalk-cdn.com/201...0361c623cf.jpg
https://uploads.tapatalk-cdn.com/201...db1c4b2ddd.jpg

Re: Ballistic17's Cbercfab Tundra
 

Here's the forward motor mount, transfer case and the GCM dual servo mount. https://uploads.tapatalk-cdn.com/201...4e28179717.jpg

Re: Ballistic17's Cbercfab Tundra
 

Well the body and rear cage got started. Also cleaned up the axles and put a set of HR od gears in it. Got all the Incision links on and gMade RSD scale shocks. Hoping the chassis and cage will be back in a couple weeks.
https://uploads.tapatalk-cdn.com/201...bc2daf009b.jpghttps://uploads.tapatalk-cdn.com/201...d34c4748e8.jpghttps://uploads.tapatalk-cdn.com/201...954437157f.jpg

Re: Ballistic17's Cbercfab Tundra
 

Thanks.

Got a couple teaser pics today from the builder.
https://uploads.tapatalk-cdn.com/201...0502efd2da.jpghttps://uploads.tapatalk-cdn.com/201...7de8afeaf3.jpg

Re: Ballistic17's Cbercfab Tundra
 

Got some more progress pics. Most of the tube is done. Just some small things to do. Than powder coat. Said he should be done with it by Wed.
https://uploads.tapatalk-cdn.com/201...70e8d500e9.jpghttps://uploads.tapatalk-cdn.com/201...a672247092.jpghttps://uploads.tapatalk-cdn.com/201...f8377e2958.jpghttps://uploads.tapatalk-cdn.com/201...ec4e5a85aa.jpg

Re: Ballistic17's Cbercfab Tundra
 

Subscribed. Looks a great start.

Re: Ballistic17's Cbercfab Tundra
 

Well the chassis is all finished. It's shipping out tomorrow. Can't wait to get it and start on it. https://uploads.tapatalk-cdn.com/201...d0fbc27091.jpghttps://uploads.tapatalk-cdn.com/201...ebff8ee1f3.jpghttps://uploads.tapatalk-cdn.com/201...82d6082fdc.jpg

Re: Ballistic17's Cbercfab Tundra
 

Got the chassis today and did a quick mock up.
https://uploads.tapatalk-cdn.com/201...5ac5f57b80.jpghttps://uploads.tapatalk-cdn.com/201...e17f8c92bb.jpghttps://uploads.tapatalk-cdn.com/201...efa209b5da.jpghttps://uploads.tapatalk-cdn.com/201...b642bcaabf.jpghttps://uploads.tapatalk-cdn.com/201...bc4691ec86.jpghttps://uploads.tapatalk-cdn.com/201...45a7ba14e9.jpghttps://uploads.tapatalk-cdn.com/201...c51e83f2bd.jpg

Re: Ballistic17's Cbercfab Tundra
 

Starting figuring out where I'll be putting all the electronics. Used Cbercfab shock keys as forward motor mount brackets and started mocking up the wraith interior. Used a old set of VP Ridged Industries light bar mounts to mount the Road Runner winch from Powershift Rc technologies. https://uploads.tapatalk-cdn.com/201...28ad95a86c.jpghttps://uploads.tapatalk-cdn.com/201...8283beef19.jpghttps://uploads.tapatalk-cdn.com/201...f138329285.jpghttps://uploads.tapatalk-cdn.com/201...cfe565bb6b.jpghttps://uploads.tapatalk-cdn.com/201...370e29fd79.jpg

Re: Ballistic17's Cbercfab Tundra
 

Little more progress. Got the VP anti-rock sway bar on and a set of Powershift Rc X-mount light pods https://uploads.tapatalk-cdn.com/201...be7e992833.jpghttps://uploads.tapatalk-cdn.com/201...611b4ce1c2.jpghttps://uploads.tapatalk-cdn.com/201...12e2341cbb.jpghttps://uploads.tapatalk-cdn.com/201...6c0c1ef80b.jpghttps://uploads.tapatalk-cdn.com/201...eb64ffaa52.jpg

Re: Ballistic17's Cbercfab Tundra
 

Reusing left over stuff. https://uploads.tapatalk-cdn.com/201...dfc68fbf5e.jpg

Re: Ballistic17's Cbercfab Tundra
 

Light pods are cool!

Sent from my HTC6545LVW using Tapatalk

Re: Ballistic17's Cbercfab Tundra
 

Thanks. Future product from Powershift Rc Technologies. Testing now.

Re: Ballistic17's Cbercfab Tundra
 

Great looking rig!

Re: Ballistic17's Cbercfab Tundra
 

Upgraded the rear axle with a VP Currie F9.
https://uploads.tapatalk-cdn.com/201...7f5940749a.jpghttps://uploads.tapatalk-cdn.com/201...0444560f7f.jpg

Re: Ballistic17's Cbercfab Tundra
 

Nice Build! I was just wondering where I can get one of those Powershift RC front motor plates? I searched and can't find them anywhere. Thanks and great work "thumbsup"

Re: Ballistic17's Cbercfab Tundra
 

Thanks. I'm good friends with the owner of Powershift. I found it on Thingiverse and he just printed it for me. Not sure how fun he is going to sell them. You could contact him through the website and check. www.powershiftrc.com

Re: Ballistic17's Cbercfab Tundra
 

Thanks Man! I will try to get a hold of him. I hope to see more updates on this build. "thumbsup"

Re: Ballistic17's Cbercfab Tundra
 

What I did with my hard body for the electronics, I mounted all of it in front. My set up is just like yours. I cut the hood out and put hinges so I could access the electronics easily. Hope this is helpful

Re: Ballistic17's Cbercfab Tundra
 

Thanks. Yeah going to be doing some major work this weekend.