| |
03-27-2018, 04:09 AM
| #1 |
| Rock Crawler Join Date: Aug 2005 Location: Asia
Posts: 510
|  Akumu - Ex Real build
Hi Guys, i traded my SCX10 v1 for a class 1 rig... its a 3Racing Ex-Real which i moded to fit the 3 door JK body it came with. Used the following parts for my build... Hobbywing 1080 ESC 35T brushed motor Sanwa waterproof servo and reciever Boomracing Hustlers 1.9 tires 4.19 class 1 spec Bankwish 1.9 wheels (china vanquish knockoffs) Jeep JK 3 door hardbody (2nd hand) Tamiya TRF dampers for the rear Boomracing alloy bumpers DIY CF electronics tray on the rear, mounted on stock mounts for the battery plate. Took off the rear stock towers and replaced it with a DIY aluminum shock towers made from an old Tamiya TXT-1 plate that i had cut long ago. btw, my friend who i traded with remove the 2 speed parts. i never really care about those so it will remain as is. this is how the chassis looks now...  this was the sanding prep work done on the body. it's actaully finished but did not have time to take proper photos of it, also need to install the light kit for it. I will be using an old tamiya light control for it...  Once done, i will post more photos. thanks for viewing! |
|  |
| Sponsored Links | |
| | |
|
03-27-2018, 04:41 AM
| #2 |
| Pebble Pounder Join Date: Oct 2004 Location: Philadelphia
Posts: 111
| Re: Akumu - Ex Real build
Nice rig when you get a chance, can you post up a pic of your DIY battery tray? I wanna do that on my EX-real as well Thanks Sent from my SAMSUNG-SM-G891A using Tapatalk |
|
| |
|
03-30-2018, 10:35 AM
| #3 | |
| Rock Crawler Join Date: Aug 2005 Location: Asia
Posts: 510
| Re: Akumu - Ex Real build Quote:
sorry... was busy, i will take a photo tomorrow when there is natural light. Last edited by v33; 03-30-2018 at 10:43 AM. | |
|
| |
|
03-30-2018, 10:36 AM
| #4 |
| Rock Crawler Join Date: Aug 2005 Location: Asia
Posts: 510
| Re: Akumu - Ex Real build
been busy getting the Ex-Real ready for a local rc photo contest and took this test shot...  Thanks for viewing! |
|
| |
|
03-31-2018, 07:05 PM
| #5 |
| Rock Stacker  Join Date: Oct 2009 Location: mitchill
Posts: 76
| Re: Akumu - Ex Real build
v33 That pic is a beauty !
|
|
| |
|
04-06-2018, 05:12 AM
| #6 | |
| Rock Crawler Join Date: Aug 2005 Location: Asia
Posts: 510
| Re: Akumu - Ex Real build Quote:
this is the tray from above...  this is from below...  hth! | |
|
| |
|
10-02-2018, 09:41 AM
| #7 |
| Rock Crawler Join Date: Aug 2005 Location: Asia
Posts: 510
| Re: Akumu - Ex Real build
I actually traded this rig back for my scx10 v1 but sold that a month after and got me a used bomber. Decided I really needed a class 1 rig for our local comp so i spoke with my friend if he would allow me to buy this back. anyways, after serveral months the ex-real is back in my stable and I have made some body mounting modifications to make it sturdier, at the same time I have made a build path to make the rubicon more scale looking and sorrca legal. with a new 80mm dampers and bumper installed this is how she looks now...  i plan on making a metal rollcage for her and extend the bumpers width to become sorrca legal. once i sort those things out, the 2nd stage will be to open up the hood and put an engine on it. thanks for vieiwing! |
|
| |
|
10-03-2018, 06:54 AM
| #8 |
| I wanna be Dave Join Date: Sep 2011 Location: Douglassville, PA
Posts: 4,224
| Re: Akumu - Ex Real build
That's a very good looking truck. Chassis looks pretty nice too - don't see too many of them. Looks like a solid rig.
|
|
| |
 |
Akumu - Ex Real build - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Akumu - SCX10 build | v33 | Axial SCX-10 | 31 | 10-09-2019 05:15 PM |
| Akumu - SCX10 II build | v33 | Axial SCX10 II | 61 | 09-07-2019 07:01 AM |
| My first real build | matt*strike | 1.9 Scale Rigs | 3 | 11-28-2013 07:02 PM |
| Practice build before I build a real crawler. | jm8881 | General Crawlers | 46 | 03-13-2005 09:21 PM |
| |
Linear Mode
