07-22-2018, 06:49 PM | #1 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| FLOYD a VS4 for the 1.9 noob
A few here might recognize my name from the Wraith pages. As I started with a Slash, Slash 4x4, I Built a Yeti, and an still building ANDY..... then built a GOM R1 with 4ws, grabbed a Bully ll and messed with that. Finally I built a tough Wraith , called OPIE, with all the goodies. All these are 2.2 rigs. Now I see and read that the 1.9 tires are correct , and I followed along a few builds, and almost ordered a toyzuki chassis and Curries..... then I saw Matt at SBG pimp the new VS4, and Damn Matt, you should be called “Huggy Bear” as I went out and financed one. so now the scale bug has started , but I can use that box under the bench........ Stay Tuned Hang up and Drive Last edited by mikemcE; 08-06-2018 at 08:03 PM. |
Sponsored Links | |
07-23-2018, 04:17 AM | #2 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: 1.9 noob
Hey Mike, I've followed along watching your Opie & Andy builds. Loved what you have done with them. Congrats on the VS4-10 purchase. Your going to love it. Extremely nice kit. Everything fits together really nice. Only problem I had was the tires. The bead is extremely soft and hard to lock in, but with some patience they will bolt together. Sent from my SM-G930V using Tapatalk |
07-23-2018, 04:45 AM | #3 |
RCC Addict Join Date: Nov 2017 Location: Austin Texas
Posts: 1,615
| Re: 1.9 noob
I only hope that most folks will get the Huggy Bear reference . Was so close to picking up one of these but for now I'll just have to live vicariously through people like you. Congrats!
|
07-23-2018, 06:09 AM | #4 |
RCC Addict Join Date: Nov 2016 Location: 1972 born Christian, Chinese.
Posts: 1,321
| Re: 1.9 noob
I myself most familiar your Opie Wraith build. Now really look forward to your first 1.9 scale build |
07-23-2018, 06:11 AM | #5 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: 1.9 noob
Thanks guys, I’m old so I still remember Huggy....... UPS shows today , gonna be a long day. I do have my paint ordered along with a set of 10/5 mm leds. I imagine tonight will go fast! Hang up and Drive |
07-23-2018, 10:27 AM | #6 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| 1.9 noob My LHS crew surprised me today...... no revolver for now Hang up and Drive Last edited by mikemcE; 07-23-2018 at 02:53 PM. |
07-23-2018, 02:14 PM | #7 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: 1.9 noob In the shop !! Hang up and Drive |
07-23-2018, 02:17 PM | #8 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: 1.9 noob
Let the fun begin! Sent from my iPhone using Tapatalk |
07-23-2018, 02:42 PM | #9 |
Quarry Creeper Join Date: Nov 2015 Location: US
Posts: 456
| Re: 1.9 noob
hope you slept well the past couple nights.....looks like fun
|
07-23-2018, 02:52 PM | #10 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: 1.9 noob |
07-23-2018, 03:58 PM | #11 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: 1.9 noob No moisture like svt’s, mine was on top !! Yada Yada Yada......it does make the heart skip a bit! Hang up and Drive |
07-24-2018, 11:35 AM | #12 |
RCC Addict Join Date: Feb 2017 Location: Surprise
Posts: 1,762
| Re: VS4 for the 1.9 noob
Me likey Mikey....! Can't wait to see what you're gonna do with this !
|
07-24-2018, 06:36 PM | #13 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: VS4 for the 1.9 noob
Started...... everything fits, even extra screws. Hang up and Drive |
07-24-2018, 06:44 PM | #14 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: VS4 for the 1.9 noob
Your going to like how easy this is to build. Every piece seems to just fall into place. No cutting, bending, hacking, hammering or redrilling! Enjoy! Sent from my iPad using Tapatalk |
07-24-2018, 07:32 PM | #15 | |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: VS4 for the 1.9 noob Quote:
You are totally right, so much fun, perfect fit. Not much slop in the trans, and a real Kimbrough gear. Hang up and Drive | |
07-25-2018, 04:33 PM | #16 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: VS4 for the 1.9 noob
Well spent another hour of fun !! OK I fought the front bearing retainers....... MF tight!!!! Yeah they are together and smooth using the shims, front is noticeably tighter than the rear. Now wait until my 1/16 driver comes in, covers, grease and high steer arms will get finished. After going thru many reviews and unboxings , I have discovered one thing no one has mentioned: this bag With that one bag VP has joined the big leagues !!! That 4way wrench has to be included if the kit will be successful !! Hang up and Drive |
07-25-2018, 05:15 PM | #17 |
Quarry Creeper Join Date: Nov 2015 Location: US
Posts: 456
| Re: VS4 for the 1.9 noob
damn I am on the verge of driving to grab one that is in stock somewhere I know of
|
07-25-2018, 05:51 PM | #18 |
Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: VS4 for the 1.9 noob
Lookin good! I have heard of other people that had bearing retainers that were tight, but mine went together fairly easy. I really like how the retainer captures the whole bearing then bolts in to axle. Sent from my iPhone using Tapatalk |
07-25-2018, 06:28 PM | #19 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: VS4 for the 1.9 noob
Links, I wasn’t hungry but now I am ?? Hang up and Drive |
07-26-2018, 03:37 PM | #20 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: VS4 for the 1.9 noob
Well good and bad news, VP responded quicker than I could believe, only question asked was "how many"? Michael then emailed me 1/2 hour later with a shipper, Monday USPS will bring replacements and a return label. Oh well I will just build with empty pumkins.... Damn what a great band name..... But Paint and my 1/16th hex driver arrived, AND my head and taillights from lighthouse RC showed up, so I will still build!
|
VS4 for the 1.9 noob - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Another NOOB Li-Po ?? | dozerboy | Electronics | 19 | 10-06-2013 12:16 PM |
noob, with noob questions | farmerstoy | General Scale Talk | 12 | 01-14-2010 06:28 PM |
Noob here | JOOTZ | Newbie General | 2 | 11-08-2008 11:34 PM |
Noob here | Rhino8123 | HPI Wheely King | 2 | 04-30-2007 06:57 PM |
| |