VS4-10 Parts and Accessories

[Topher Builds]

This thread is to share available parts and accessories for the VS4-10 as they are starting to come out. Please add anything you’ve come across if you feel like sharing.

Vanquish parts page:
RC Accessories - Vanquish VS4-10 Parts - Vanquish Products

Amain parts page - at this time they have some discounts on electronics combos as well as the knights customs parts available such as the cage, door panels, and headrests
https://www.amainhobbies.com/search?cID=&s=vs4-10

Custom emblems (non-US)
your right choice
rc crawler veicoli radiocomandati per fuoristrada estremo

And of course shapeways... knights customs gear available here as well as other grills, fairlead mounds, etc
https://www.shapeways.com/marketplac...oduct&q=Vs4-10

[svt923]

Powershift RC has a light kit for the Origin body.

https://www.ecwid.com/store/store114...KIT-p112041598

[Topher Builds]

Just saw this rear body mount plate pop up on shapeways, necessary for chopping the top...

https://www.shapeways.com/product/AW...li=marketplace

[Topher Builds]

I’ve been looking for ways to over drive the front and/or underdrive the rear for which there aren’t options listed anywhere for the vs4-10 that I could find.

After some digging around I’ve learned that the spool in the axles is the same as scx10ii so I rolled the dice on these. Got them installed and no binding or anyhing. The ring gear fit was tight but I believe this is a flaw in the gear I received as I had ordered an extra scx10ii spool and the fit was the same there.

Hot Racing Axial SCX10 II HD Steel Bevel Overdrive Gear Set (27T/8T) -
https://www.amainhobbies.com/hot-rac...xt9278/p710174

[Topher Builds]

This little guy fits right on the front bumper... not listed in the VP parts page but it is a VP direct fit part.

VPS06761 - Vanquish Products Rigid Industries 1" LED Light Bar

https://www.amainhobbies.com/vanquis...s06761/p263750

[B-MOW71]

I like it! I may get it and mount it right above my winch fairlead that is bolted to the bumper. Thanks for sharing!

Sent from my SM-G930V using Tapatalk

[Topher Builds]

Posted this in paint and body but is applicable here..

Originally Posted by Pant Danza

Just saw this show up! $99 and includes the full interior and trim pieces.

Origin Body Set - Vanquish Products

Vanquish Origin Complete Body Set.

Includes the following:

Clear Lexan Body 100% laser cut. No trimming required
Clear Lexan interior and dash 100% laser cut.
Window masks - die cut
Origin Body decal sheet - die cut
Interior decal sheet - die cut
VPS10119 Origin Body Detail Set
All required hardware for assembly

Also a link the ripper bumper... https://www.amainhobbies.com/vanquis...s06873/p717453

[B-MOW71]

Oh, nice! I’ve been waiting for it to pop up on their website. I want to get one to do the topless body. It wasn’t listed this morning when I bought the Ripper bumper. I guess I’m going back to VP website. Thanks for letting us know.


Sent from my iPad using Tapatalk

[Topher Builds]

KNK hardware is available as a kit...
https://www.rpphobby.com/product_p/knkvs4101.htm

A nice looking tailgate option from SBC but a hefty price tag
https://www.amainhobbies.com/scale-b...c067vb/p789904

Also seeing some light bucket options pop up on shapeways, with 3 or 4 bulb arrangements instead of the one 10mm
https://www.shapeways.com/product/4D...li=marketplace

Lastly got my frame rail replacements today, in the retail packaging with a $39.99 price tag. Haven’t seen them pop up online just yet.

[CM9000]

Originally Posted by Pant Danza

Lastly got my frame rail replacements today, in the retail packaging with a $39.99 price tag. Haven’t seen them pop up online just yet.

where did you aquire the rails? I see the skid, and chassis braces and shock towers on vp's website. but no rails...

[Topher Builds]

Originally Posted by CM9000

where did you aquire the rails? I see the skid, and chassis braces and shock towers on vp's website. but no rails...

Warranty.

See post 18 here if you want the sads... Danza’s Origin

[CM9000]

Originally Posted by Pant Danza

Warranty.

See post 18 here if you want the sads... Danza’s Origin

Cant see via tapatalk.

Sent from my LGMP260 using Tapatalk

[Topher Builds]

Vanquish VS4-10 - Club 5 Racing

Dual exhaust tips, foams, and a rear mud guard that looks like it may brace the rails some too, but I’m waiting for the VP solution.

These tips do look cool, stainless steel and not painted

[zohn]

exclusive rc has got rear tire mount, roofrack, dash parts, headrests, rear hatch panels(,one with international scout badging I instantly ordered), and a few other items.

[JatoTheRipper]

Which size SLW hubs would be equivalent to the stock hubs?

[Brandon]

Originally Posted by JatoTheRipper

Which size SLW hubs would be equivalent to the stock hubs?

350. But I like to run 225's.

[JatoTheRipper]

Originally Posted by Brandon

350. But I like to run 225's.

Thank you!

[JatoTheRipper]

I know Vanquish uses SAE hardware on their wheels. Is the hardware on the Origin also standard?

[svt923]

Originally Posted by JatoTheRipper

I know Vanquish uses SAE hardware on their wheels. Is the hardware on the Origin also standard?

All metric except the little 1-64 screws that hold the upper steering arm on the knuckles. A 1/16 wrench is the only SAE driver needed and only for 9 screws.

[GA Dawg]

Vanquish mixing SAE and metric hardware kills me. It gives me bad flashbacks to my 84 Camaro.