Go Back   RCCrawler Forums > Scale Rigs General Tech > 1.9 Scale Rigs
Loading

Notices

Thread: 3D Printed Range Rover Classic

Reply
 
LinkBack Thread Tools Display Modes
Old 04-13-2019, 03:39 PM   #1
Newbie
 
Join Date: Oct 2016
Location: United Kingdom
Posts: 18
Default 3D Printed Range Rover Classic

This rig started of as an original 1980’s Tamiya Hilux chassis that was straightened, converted to rear 3 link and a HSP gearbox in the front. It ran well like this but I fancy a change so I’m going to be using files from thingiverse to print a Range Rover body for it. The plan is for it to be ready for the UK Recon G6 which is in just over a month so I don’t have long.

Heres a link to the body that im using: https://www.thingiverse.com/thing:3253387






Sent from my iPhone using Tapatalk
AaronXIV is offline   Reply With Quote
Sponsored Links
Old 04-13-2019, 03:44 PM   #2
Newbie
 
Join Date: Oct 2016
Location: United Kingdom
Posts: 18
Default Re: 3D Printed Range Rover Classic








Sent from my iPhone using Tapatalk
AaronXIV is offline   Reply With Quote
Old 04-13-2019, 03:49 PM   #3
Newbie
 
Join Date: Oct 2016
Location: United Kingdom
Posts: 18
Default Re: 3D Printed Range Rover Classic

Iíve started printing some of the parts for it, black isnít the best colour to spot the imperfections but itíll be painted in the end so itís not too big of an issue. Iím planning on converting to front 3 link and doing the spring/shock setup similar to the full-size Range Rover with some 3D printed parts.






Sent from my iPhone using Tapatalk
AaronXIV is offline   Reply With Quote
Old 04-14-2019, 11:47 AM   #4
Newbie
 
Join Date: Oct 2016
Location: United Kingdom
Posts: 18
Default Re: 3D Printed Range Rover Classic

Started taking apart the front end to 4 link it, used the front leaf spring mounts as the lower link mounts on the chassis as I did on the rear using some scale hardware.



Im also thinking about slightly re working the rear end by mounting the 3rd link lower down and making a new axle truss that looks a bit better. As originally the Hilux was built with performance in mind I configured the links so the axle was on a slant for better driveshaft angles. This works well but looks a bit weird on a scale vehicle so Iím going to sort that out







Sent from my iPhone using Tapatalk
AaronXIV is offline   Reply With Quote
Old 04-15-2019, 01:38 PM   #5
Newbie
 
Join Date: Oct 2016
Location: United Kingdom
Posts: 18
Default Re: 3D Printed Range Rover Classic

Iíve started on the front 4 link, using the flat bar link mount as it gives me more space for the servo arm and made a link mount for the rear out of aluminium.


Also being testing some 3D printed straight axle adapters for the highlift and TLT axles copying an old RC4wd design. I need to beef them up a bit if I were to use them in the final model.



Sent from my iPhone using Tapatalk
AaronXIV is offline   Reply With Quote
Old 04-15-2019, 02:24 PM   #6
Newbie
 
Join Date: Oct 2016
Location: United Kingdom
Posts: 18
Default Re: 3D Printed Range Rover Classic

Finished the front 4 link, should have pretty scale flex. Need to start designing the spring holders for the axle and frame rails and then start on the rear end 4 link.


Sent from my iPhone using Tapatalk
AaronXIV is offline   Reply With Quote
Old 04-15-2019, 03:42 PM   #7
Newbie
 
Join Date: Oct 2016
Location: United Kingdom
Posts: 18
Default Re: 3D Printed Range Rover Classic

Printing continues, decided to experiment on doing some scale damage to one of the front wings, looks okay I think but going to keep this body straight. The body is going to be very wide, about 230mm so the wheels should have a bit of tuck in the end.






Sent from my iPhone using Tapatalk
AaronXIV is offline   Reply With Quote
Reply



3D Printed Range Rover Classic - Similar Threads
Thread Thread Starter Forum Replies Last Post
Range Rover Classic build pantablo 1.9 Scale Rigs 82 08-02-2012 06:46 AM
Range Rover Classic on SXC10 Fuxl 1.9 Scale Rigs 0 03-10-2011 12:56 AM
my range rover classic build microrover Losi Micro-Rock Crawler 0 11-24-2010 03:22 AM
Range Rover Classic AeroSynch 1.9 Scale Rigs 3 09-23-2009 01:47 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 05:00 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com