Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > Vanquish Products VS4-10 Origin
Loading

Notices

Thread: Tekin Builds - VS4-10 Origin Black

Reply
 
LinkBack Thread Tools Display Modes
Old 03-21-2019, 10:37 AM   #1
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Tekin Builds - VS4-10 Origin Black

Tekin Builds is my new show where I'll be building all the things and trying to make decent videos of the endeavors. My first build to be featured on the show is a Vanquish VS4-10 Origin Limited Black edition. So far it has been a fantastic build and I am really looking forward to running it this year. Episode 1 of Tekin Builds is now live, so check that out and check in here for more updates as I get the Origin put together and ready to rock!

Tekin Builds Ep.1 - Vanquish VS4-10 Origin Limited Black

Build Photos


Boxes of the good stuff. Tekin RX4, ROC412 2300kV and T-360 servo will live in the VS4-10.


Coolest kit box I have ever opened. I stared at this for an hour, it's so beautiful!


Build area setup in the studio. Commence filming and assembling!


The Origin axles are my favorite VP axle now. Something about the offset front diff and the overall scale-ness just really sets the tone for this build. Spiral cut gears, VDI universals, removable diff cover. So much yes.


The ROC412 is a powerhouse and since the sensor board is coated, ain't care about water. I don't usually drive in much but if you want to, make sure you use the included grease in the sensor ports! All sensor ports are a weak point in "waterproof" systems....because nothing is really waterproof, but we do what we can to protect those precious electronics! The transmission is dialed, it is 100% metal with hardened steel gears and HD outputs. There's no slipper clutch, so hopefully our ROC412 won't break too many parts. I usually run a slipper and probably will end up with one. (I know, I missed a sensor wire in the clip on the back of the motor...already fixed!)


T-360 servo sitting pretty in the mount. The updated chassis braces in this kit are really nice and will definitely increase frame strength. So far so good, everything has dropped right together!
Ty@Tekin is offline   Reply With Quote
Sponsored Links
Old 03-21-2019, 04:26 PM   #2
Pebble Pounder
 
Join Date: May 2015
Location: UK
Posts: 185
Default Re: Tekin Builds - VS4-10 Origin Black

I put a similar powerful Brushless system in my Origin and was worried about the spur stripping but it's held up to quite some abuse. So far it's as good as new...still, I did buy 3 spares from Kimborough.
mond is offline   Reply With Quote
Old 03-22-2019, 08:27 AM   #3
v33
Rock Crawler
 
Join Date: Aug 2005
Location: Asia
Posts: 510
Default Re: Tekin Builds - VS4-10 Origin Black

very nice... wanted mine black but did not want to wait for an overseas purchase to come in and the taxes that comes with it. so i opted to get one from a local dealer and it was clear one.

anyways, i ran the axe 2300kv on mine... but i really love tekin products, your build looks really cool.

i would toss the wheels and tires.... they are not my fav. tranny is beautiful but an old design.

looking forward to seeing this finished. i could not stop building mine, just took a few hours to assemble it.

v33 is offline   Reply With Quote
Old 03-22-2019, 09:26 AM   #4
Go Buckeyes!
 
B-MOW71's Avatar
 
Join Date: Jun 2017
Location: Mid-Ohio
Posts: 4,121
Default Re: Tekin Builds - VS4-10 Origin Black

Nice build write-up and nice pics. The VS4-10 is the best built kit that I have put together. I agree with v33, swap out tires and wheels. They were a pain to assemble. Had to trim the foams and put the tires in the freezer for awhile to get them mounted. And I like a little wider tire too.

Looking forward to the rest of your build.
B-MOW71 is online now   Reply With Quote
Old 03-22-2019, 10:58 AM   #5
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Don't worry, I have plans for wheels and tires. All will be covered in the next episodes!
Ty@Tekin is offline   Reply With Quote
Old 03-22-2019, 11:12 AM   #6
I wanna be Dave
 
Join Date: Jan 2005
Location: Raleigh-ish vicinity
Posts: 3,846
Default Re: Tekin Builds - VS4-10 Origin Black

I saw this build on Instagram, glad to see it made it's way here as well.

There is a nice, convenient spot for a Tekin servo winch, good thing you know some guys that could make it happen.
svt923 is offline   Reply With Quote
Old 03-22-2019, 11:21 AM   #7
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Quote:
Originally Posted by svt923 View Post
I saw this build on Instagram, glad to see it made it's way here as well.

There is a nice, convenient spot for a Tekin servo winch, good thing you know some guys that could make it happen.
I'm working on that, since we can rotate 360 degrees it would just be a software change to enable a "winch mode". Hopefully I can make it happen!
Ty@Tekin is offline   Reply With Quote
Old 03-27-2019, 03:21 PM   #8
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Episode 2 of Tekin Builds is up! This truck has been such a pleasure to assemble. I've had zero snags, everything fits perfectly and I can tell driving it is going to be very rewarding.

Tekin Builds Ep.2 - Vanquish VS4-10 Origin Limited Black

More Photos

Front offset Currie axle = winning.


Rear Currie also = winning.


The ROC 412 looks at home.


Gear Guard


Rock Sliders


T-360 in the servo mount. Just need to get the 20mm VP horn.


Mocked up fender liners. These attach very securely to the rock sliders and the frame. Very nice feature that should be a standard on all scale kits.
Ty@Tekin is offline   Reply With Quote
Old 04-09-2019, 08:07 AM   #9
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Tekin Builds EP.3 - Vanquish VS4-10 Origin Limited

Totally forgot to update with last week's episode, so here it is! I cover installing the RX4, a little bit of soldering, a couple quick settings like Voltage Cutoff, Motor Type (Reverse Type) and calibrating the ESC to a radio. I also show how to center our T-360 servo and set the End Points.

Build Photos









Ty@Tekin is offline   Reply With Quote
Old 04-12-2019, 09:21 AM   #10
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Tekin Builds EP.4 - Vanquish VS4-10 Origin Limited

Episode 4 is up! This was my favorite part of the build, everything comes together and we get a finished (yeah right) product!

Build Photos



















Ty@Tekin is offline   Reply With Quote
Old 04-12-2019, 06:19 PM   #11
Pebble Pounder
 
Join Date: Jan 2019
Location: Douglas, MA
Posts: 104
Default Re: Tekin Builds - VS4-10 Origin Black

Paint and graphics look really good
Brian5582 is offline   Reply With Quote
Old 04-15-2019, 08:50 AM   #12
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Quote:
Originally Posted by Brian5582 View Post
Paint and graphics look really good
Thanks, I'm really happy with how it turned out! Now I'm working on a second body that will have a lot of Knight Customs parts.
Ty@Tekin is offline   Reply With Quote
Old 04-26-2019, 08:49 AM   #13
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Tekin Builds EP.5 - Vanquish VS4-10 Origin Maiden Voyage

Well last week the scale gods smiled down upon me and lifted the nasty weather so I could get some wheel time on the VS4-10. Made a video of the adventure and included some bits of info and my thoughts on the truck, the build, how it drives and some more blab. Enjoy!

















Ty@Tekin is offline   Reply With Quote
Old 04-26-2019, 10:24 AM   #14
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,921
Default Re: Tekin Builds - VS4-10 Origin Black

That's boner material! Sweet build!
JatoTheRipper is offline   Reply With Quote
Old 05-13-2019, 08:03 AM   #15
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Episode 6, the trail run! I took the Origin out and braved the cold wind to see what it could do on my home trail. I went up 10wt in the rear shocks to 50wt and geared it down from 13T to 10T. Lost a bit of wheel speed but it still has plenty thanks to the 4S 2300kV setup. Very smooth and I really like wheeling this truck!

Tekin Builds EP.6 - VS4-10 Trail Run
Ty@Tekin is offline   Reply With Quote
Old 06-07-2019, 10:43 AM   #16
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Decided to do a second body and cut the top off this time. Knight Customs rocks and all the parts for this mod fit perfectly! The cage is a must and the door cards, shift console, gauge cluster and switch panels all added some great detail.








Last edited by Ty@Tekin; 06-07-2019 at 10:52 AM.
Ty@Tekin is offline   Reply With Quote
Old 06-07-2019, 09:11 PM   #17
Newbie
 
Join Date: Jan 2018
Location: Lincoln
Posts: 15
Default Re: Tekin Builds - VS4-10 Origin Black

Just beautiful man!
RayB is offline   Reply With Quote
Old 06-09-2019, 05:49 AM   #18
Go Buckeyes!
 
B-MOW71's Avatar
 
Join Date: Jun 2017
Location: Mid-Ohio
Posts: 4,121
Default Re: Tekin Builds - VS4-10 Origin Black

Love it Ty! Color scheme is bad a$$!


Sent from my iPhone using Tapatalk
B-MOW71 is online now   Reply With Quote
Old 06-20-2019, 09:54 AM   #19
RCC Addict
 
Join Date: Feb 2008
Location: Tekin, ID
Posts: 1,940
Default Re: Tekin Builds - VS4-10 Origin Black

Thanks guys! I didn't think I'd ever like yellow anything but this has really grown on me.
Ty@Tekin is offline   Reply With Quote
Old 06-20-2019, 10:11 AM   #20
Moderator
 
JatoTheRipper's Avatar
 
Join Date: Sep 2008
Location: PA
Posts: 13,921
Default Re: Tekin Builds - VS4-10 Origin Black

That's yellow? It looks orange to me. I like it.
JatoTheRipper is offline   Reply With Quote
Reply



Tekin Builds - VS4-10 Origin Black - Similar Threads
Thread Thread Starter Forum Replies Last Post
💥💥Coupon Codes Now Available On Vanquish VS4-10 Origin Limited & Limited Black Kits RPP Hobby RPP Hobby 0 02-26-2019 11:21 AM
NEW Wertymade Fans VS4-10 Origin Front Bumper! RPP Hobby RPP Hobby 0 12-28-2018 02:30 PM
IN STOCK Vanquish Products VS4-10 Origin Limited Black Kit! RPP Hobby RPP Hobby 1 12-27-2018 08:05 PM
PRE ORDER NOW the Vanquish Products VS4-10 Origin Limited Black Kit! RPP Hobby RPP Hobby 0 12-17-2018 04:20 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 10:33 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com