Go Back   RCCrawler Forums > Scale Rigs General Tech > 1.9 Scale Rigs
Loading

Notices

Thread: Deerhurst's D21 Build

Reply
 
LinkBack Thread Tools Display Modes
Old 06-23-2019, 05:25 PM   #1
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Deerhurst's D21 Build

First time Ive done a build thread I believe. Ive done "look at this cool painted body" but never a full build. I fully expect this to take forever and to not go anywhere close to as planned.



So far the plan is to print a Nissan D21 body and put it on a chassis. I have 2 choices, a HiLift chassis or an Ascender chassis. The Hilift Hilux recently took a big tumble when I fell off a small cliff and it tumbled down behind me so it needs some TLC. Im leaning towards using the Ascender.



My inspiration is this:





So, itll be a MiniMe of my 1:1. Nissan bodies are hard to find.



Wheels will be a set of left over RC4WD Wagon Wheels. Tires are undecided. Maybe Proline KO2s. To leaf or not to leaf?



It probably wont handle great since the body will weigh a ton. The wheelbase will be quite long. Easily a couple inches longer than the HiLift.



Since my 3D printer is fairly small, 220x200x250, I had to split the cab and the box into 4 pieces each. About 23hours a piece. Then sand, prime, sand, prime, sand, prime and hopefully paint!



So far, I have a corner....





Lots to do! It will evolve as it goes. Need to order a couple more rolls of filament to keep printing.
Deerhurst is offline   Reply With Quote
Sponsored Links
Old 06-23-2019, 05:30 PM   #2
I wanna be Dave
 
Join Date: Jul 2014
Location: Deep South
Posts: 3,444
Default Re: Deerhurst's D21 Build

I’ll subscribe. The Flaming Marshmallow doesn’t live but maybe an hour or so from me.
Brake Weight is offline   Reply With Quote
Old 06-23-2019, 07:38 PM   #3
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

That is one cool hardbody! Havnt heard from the Flaming Marshmallow in a while. Maybe I'll have to do a camper in tribute!
Deerhurst is offline   Reply With Quote
Old 06-23-2019, 08:51 PM   #4
I wanna be Dave
 
Join Date: Jul 2014
Location: Deep South
Posts: 3,444
Default Re: Deerhurst's D21 Build

Quote:
Originally Posted by Deerhurst View Post
That is one cool hardbody! Havnt heard from the Flaming Marshmallow in a while. Maybe I'll have to do a camper in tribute!
LOL. That thing is pimped out.
Brake Weight is offline   Reply With Quote
Old 07-06-2019, 10:11 AM   #5
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

Cab is 50% printed and still a long ways off from being mounted. The seam needs to be filled and the entire thing sanded, primed, sanded, primed.....etc. Hoping to print another quarter of the cab today.

Deerhurst is offline   Reply With Quote
Old 07-09-2019, 06:06 PM   #6
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

Cab is 75% printed and almost half way through the last piece. Its gonna be really big.

My Tamiya HiLift Hilux in the background. The width of the Nissan is based off the width of the Tamiya lid.





Deerhurst is offline   Reply With Quote
Old 07-10-2019, 10:29 AM   #7
I wanna be Dave
 
Join Date: Jun 2016
Location: Austin
Posts: 6,005
Default Re: Deerhurst's D21 Build

Looking good - I briefly had a brand new 2wd D21 in black, with brushed aluminum 5-spoke wheels and BFG Radial T/A tires.

They're really nicely styled trucks...
durok is online now   Reply With Quote
Old 07-10-2019, 08:08 PM   #8
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

I like the little D21 too. Got the entire cab printed at this point. I need to take photos. It's big. It's the right width for the Tamiya HiLift. Probably 6 days in printing just for the cab. Plan to start the box this weekend.
Deerhurst is offline   Reply With Quote
Old 04-06-2021, 02:28 PM   #9
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

This is still a WIP. Just took a long siesta in the middle. Now with the new element IFS chassis I'm thinking of putting it on one of those but for now I'm back to working on the body. I'm impatient and don't like detailed work.

The entire body is printed, 8 pieces, welded together as a cab and a box. Started sealing the print with filler primer yesterday. I'll get pics us as I go. It needs some bondo for the bigger gaps too.

I'm thinking of using the IFS enduro chassis and going leafed in the rear but not sure. I have an Ascender already but it doesn't go long enough with the supplied links. Might chop the king cab out of the body bit not yet sure. The KC is growing on me.

Sent from my Phone 2 using Tapatalk
Deerhurst is offline   Reply With Quote
Old 04-06-2021, 02:47 PM   #10
I wanna be Dave
 
Join Date: Jun 2020
Location: The Big Island
Posts: 2,010
Default Re: Deerhurst's D21 Build

Wow, this looks really good! Did you design this yourself?

I’d leave it as a King Cab, I’ve always liked them better.


_________________
https://www.instagram.com/island_crawlaz/

79 F150 SCX10 ii
TRXWalker
ScaleLifeNewbie is offline   Reply With Quote
Old 04-06-2021, 05:58 PM   #11
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

Quote:
Originally Posted by ScaleLifeNewbie View Post
Wow, this looks really good! Did you design this yourself?

I’d leave it as a King Cab, I’ve always liked them better.


_________________
https://www.instagram.com/island_crawlaz/

79 F150 SCX10 ii
TRXWalker
Did not design it myself. I wish. The grill would have been different as this has the 88-89/pathfinder grill and headlights. I prefer the D21 setup. I found the model as a 1/24 or 1/18 scale model and scaled it up poorly before I knew better then broke it into 8 pieces to fit on my printer and went from there!

Just put a can of primer filler on it and it'll need bondo or similar.

Sent from my Phone 2 using Tapatalk
Deerhurst is offline   Reply With Quote
Old 04-06-2021, 05:58 PM   #12
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

Still working.on the body. Gonna need bondo.

Sent from my Phone 2 using Tapatalk
Deerhurst is offline   Reply With Quote
Old 04-06-2021, 06:05 PM   #13
I wanna be Dave
 
Join Date: Jun 2020
Location: The Big Island
Posts: 2,010
Default Re: Deerhurst's D21 Build

Quote:
Originally Posted by Deerhurst View Post
Did not design it myself. I wish. The grill would have been different as this has the 88-89/pathfinder grill and headlights. I prefer the D21 setup. I found the model as a 1/24 or 1/18 scale model and scaled it up poorly before I knew better then broke it into 8 pieces to fit on my printer and went from there!

Just put a can of primer filler on it and it'll need bondo or similar.

Sent from my Phone 2 using Tapatalk

Oh ok.

If you have any E6000 on hand, it’s works in a pinch. I used it on this Bruiser body I’m doing to fill in the gap from the bob. I go more in depth on my thread “SLN’s Brusier Build” if you want to know more about it.


_________________
https://www.instagram.com/island_crawlaz/

79 F150 SCX10 ii
TRXWalker
ScaleLifeNewbie is offline   Reply With Quote
Old 04-15-2021, 06:57 PM   #14
Quarry Creeper
 
Join Date: Mar 2012
Location: Roseburg
Posts: 406
Default Re: Deerhurst's D21 Build

Starting on bondo work. Need to fix the stance and wheelbase of the chassis too but that'll come after the body is ready for paint.

I keep screwing up the bondo ratios and it keeps hardening way too fast. First time I've ever done bondo or done a printed anything this large.

I might narrow the axles or find a narrower chassis too. Once the body is ready for final paint I'll get the chassis figured out.

In the mean time my HiLift needs some servo TLC!

Sent from my Phone 2 using Tapatalk
Deerhurst is offline   Reply With Quote
Reply



Deerhurst's D21 Build - Similar Threads
Thread Thread Starter Forum Replies Last Post
Nissan D21 Hardbody Truck Body? JasonA Paint and Body 5 10-25-2014 08:21 PM
My D21 Build ( Might be pic heavy ) Deerhurst 1.9 Scale Rigs 3 07-02-2012 10:15 PM
D21 Hardbody 92PathSE 1.9 Scale Rigs 29 10-26-2010 06:19 PM
Nissan Hardbody King Cab build - D21 NissanNut 2.2 Scale Rigs 40 10-21-2006 06:02 PM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com