Samil 20 4x4 utility Truck The Samil 20 is a legendary military truck in South Africa. These things puts a smile on my face every time I see one. With it being such a simple cab design I decided to attempt building one. I will use recycled abs sheet in 2mm and 0.9mm thickness. Scaled to about 1/8.3 to allow for tucked tires on ar44 axles. This will be a slow build, hopefully to be completed December... Still deciding on a gearbox. Will design the chassis around whatever I end up getting. The Samil 20 in all its glory: https://uploads.tapatalk-cdn.com/201...fd8475c3e0.jpg https://uploads.tapatalk-cdn.com/201...86c8e9a839.jpg Started chopping some abs already: https://uploads.tapatalk-cdn.com/201...9dfa859187.jpg Scale print on a D90: https://uploads.tapatalk-cdn.com/201...31e873f21a.jpg Parts Update December 2020: Axles - HG P802. Transfer case - Generic 2:1. Gearbox - Generic 5:1. Beadlocks - GRC Military. Tires - Generic Military 116mm. Servo - JX PDI-HV5523MG straight off 2s. Motor - surpass branded generic 3slot 20t 550. ESC - 1060 I had lying around. Chassis: Main rails was 50x25 alu tube with 2mm wall. I cut it down to get 25x8 c channel. Braces and gearbox mount is normal old 21x21 u channel. All other bits was stock lying around. |
Re: Samil 20 4x4 utility Truck Subbed. |
Re: Samil 20 4x4 utility Truck Awesome truck, drove many a Samil in the bush. Eager to see how this progresses!! |
Re: Samil 20 4x4 utility Truck This is going to be excellent! Cant wait! |
Re: Samil 20 4x4 utility Truck Got some more of the cab done today: https://uploads.tapatalk-cdn.com/201...8979016ecb.jpg https://uploads.tapatalk-cdn.com/201...79280ef0ca.jpg https://uploads.tapatalk-cdn.com/201...80cae7010d.jpg https://uploads.tapatalk-cdn.com/201...0d03512cc2.jpg Doors and wind shield next. Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Another small bit done. https://uploads.tapatalk-cdn.com/201...e179f198e1.jpg Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck https://uploads.tapatalk-cdn.com/201...67242819d0.jpg https://uploads.tapatalk-cdn.com/201...e41391fdc7.jpg Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Looking very good! Nice fab work. |
Re: Samil 20 4x4 utility Truck Quote:
Thanks! Got a bit further https://uploads.tapatalk-cdn.com/201...09c90a3013.jpg Tools thats building this https://uploads.tapatalk-cdn.com/201...077701618d.jpg Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Awesome work so far :) |
Re: Samil 20 4x4 utility Truck Got a 1:5 planetary on order. Triton transfer case should be here next week. Going with basic military style 1.9 tires and will run these glue ons till I find something nice thats a beadlock: https://uploads.tapatalk-cdn.com/201...70166b55c8.jpg Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Should get some more abs work done over the weekend. Seats are a bit if a challenge for me, but should have two done. Correction about the transfer case, it the hammer t case. Leaf springs are also en route. Getting closer to having the parts to be able to finish the chassis cad. Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck cab is looking good. Nice work.. |
Re: Samil 20 4x4 utility Truck Got some of the interior done https://uploads.tapatalk-cdn.com/201...a402f3256b.jpg https://uploads.tapatalk-cdn.com/201...8c9ca45b14.jpg Those seats pushed my abilities over the edge. Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Got a bit further with the abs. https://uploads.tapatalk-cdn.com/201...0268b79bc7.jpg The transfer case also rocked up. Gave it some proper grease and thread lock. https://uploads.tapatalk-cdn.com/201...5c483f6fce.jpg https://uploads.tapatalk-cdn.com/201...964a4fadf4.jpg https://uploads.tapatalk-cdn.com/201...740dd18c6e.jpg https://uploads.tapatalk-cdn.com/201...78d0468425.jpg https://uploads.tapatalk-cdn.com/201...46a6fbba10.jpg https://uploads.tapatalk-cdn.com/201...4f213b12cc.jpg https://uploads.tapatalk-cdn.com/201...2e8837c83b.jpg Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Got the leafs today. Now trying to figure out the mounting. Will also be using 75mm internal spring shocks. Its my first leaf build. They are a lot bigger than I expected. Here is what I came up with so far: https://uploads.tapatalk-cdn.com/201...bbeb94b39.jpeg https://uploads.tapatalk-cdn.com/201...ab5071535.jpeg https://uploads.tapatalk-cdn.com/201...1ce5d2974.jpeg Any better ideas? Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck That looks great. Nice modeling. The transfer case hangs low and that will hinder performance if you are worried about that. You are mounting your leaf springs on the outside of the chassis which will work, but the mounts look like they'll be prone to bending. You could do it like the Sawback does it which is how most RC leaf spring rigs do it. The shackles straddle the frame. Oh and the Sawback leaf spring shackle and mount kit is sold separately here: https://www.rpphobby.com/product_p/gma52304.htm More photos here: Gmade 1/10 GS01 SAWBACK - JunFac https://images.amain.com/images/larg...gma52004_3.jpg http://gmadekorea1.cafe24.com/wp/wp-...spension01.jpg |
Re: Samil 20 4x4 utility Truck Thanks Jato. The only reason its on the outside at the moment is because of the stupid long shackles. Think I might just make some smaller ones. These are 25mm eye to eye. Will shoot for 12mm. Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Had a go at the cad again. Will DIY me some shackles and a u-bolt mount. https://uploads.tapatalk-cdn.com/201...756f65456.jpeg https://uploads.tapatalk-cdn.com/201...2327b79e3.jpeg https://uploads.tapatalk-cdn.com/201...489c095eb.jpeg https://uploads.tapatalk-cdn.com/201...43a0e8f89.jpeg Sent from my iPhone using Tapatalk |
Re: Samil 20 4x4 utility Truck Just need to put some mounts on the body still, then start priming and sanding. Color will be Rustoleum Cammo Sand. https://uploads.tapatalk-cdn.com/201...767ef1cd39.jpg https://uploads.tapatalk-cdn.com/201...f803a0b52d.jpg https://uploads.tapatalk-cdn.com/201...777255c4f0.jpg https://uploads.tapatalk-cdn.com/201...fd21319fb6.jpg https://uploads.tapatalk-cdn.com/201...bdad11b8fb.jpg https://uploads.tapatalk-cdn.com/201...b2b53ef01a.jpg https://uploads.tapatalk-cdn.com/201...a8bdf0d9ea.jpg Sent from my iPhone using Tapatalk |
All times are GMT -6. The time now is 03:22 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com