Injora SCX10 ii clone So a real Axial SCX10 ii is about $800 here in little ol' New Zealand which is a bit much for me. Has anyone had any experience with these Injora clone chassis? I've used their wheels before which we really good quality https://i.imgur.com/jD6AxGu.jpg |
Re: Injora SCX10 ii clone If you want a clone of the SCX10.2, you'd better of buying Reely's FreeMen than this Injora ... |
Re: Injora SCX10 ii clone Quote:
|
Re: Injora SCX10 ii clone Quote:
|
Re: Injora SCX10 ii clone Quote:
Sent from my SM-G965F using Tapatalk |
Re: Injora SCX10 ii clone Quote:
https://www.amainhobbies.com/axial-h...xi30395/p22052 |
Re: Injora SCX10 ii clone If this is a scx10.2 clone then scx10.2 parts most likely will fit. Those diff gears are og scx10 not scx10.2 |
Re: Injora SCX10 ii clone The Injora chassis has axles that looks like SCX10.2 ones, but only looks like ... if you take a good look at them, you'll notice their pinion is centered on the axle unlike on 10.2's axles and the ring and pinion are straight cut. https://ae01.alicdn.com/kf/HTB17NJwR...nq6y80pXap.jpg |
Re: Injora SCX10 ii clone Quote:
|
Re: Injora SCX10 ii clone Quote:
|
Re: Injora SCX10 ii clone Quote:
Im guessing that the diff housings must be slightly larger that the scx10ii if they are using the same gears as the scx10 diffs? |
Re: Injora SCX10 ii clone Ok, in the end I decided to go with the Remo Hobby 1093. Cheap as chips and it's a mix of SCX10 (axles) and SCX10 ii (suspension layout). Comes RTR but will be getting the usual upgrades of course https://youtu.be/1tyM3wcu4Kc https://youtu.be/0JVP0WTDpAY |
Re: Injora SCX10 ii clone Quote:
|
Re: Injora SCX10 ii clone Quote:
|
Re: Injora SCX10 ii clone Quote:
Can you tell me if the Axial bevel sets fit in the Injora axles? I have an Injora chassis coming tomorrow :) Thanks! |
All times are GMT -6. The time now is 02:25 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com