Injora SCX10 ii clone

[nzrc]

So a real Axial SCX10 ii is about $800 here in little ol' New Zealand which is a bit much for me. Has anyone had any experience with these Injora clone chassis? I've used their wheels before which we really good quality

[tuxstang]

If you want a clone of the SCX10.2, you'd better of buying Reely's FreeMen than this Injora ...

[nzrc]

Originally Posted by tuxstang

If you want a clone of the SCX10.2, you'd better of buying Reely's FreeMen than this Injora ...

Shipping makes it quite expensive

[nzrc]

Originally Posted by hobbyjumper

Similar dollar situation here in Canada (though not that extreme, but I feel your pain). Personally, no, but the reviews on Amazon are not so good, as in "the whole is not greater than the sum of its parts."

You might ask this guy via YouTube https://www.youtube.com/watch?v=1RNCLsVXfJU

Can get the RGT EX86100 for a good price. Just not sure on spares and upgrades

[JKMIDDY22]

Originally Posted by nzrc

So a real Axial SCX10 ii is about $800 here in little ol' New Zealand which is a bit much for me. Has anyone had any experience with these Injora clone chassis? I've used their wheels before which we really good quality

I bought one the other day just for a look and it's not that bad tbh and you can use all scx10 parts only real problem is transmission and diff I haven't had an issue with mine yet but you can get some ebay alloy transmission for cheap over all not to bad and I have genuine sx10iis

Sent from my SM-G965F using Tapatalk

[nzrc]

Originally Posted by JKMIDDY22

I bought one the other day just for a look and it's not that bad tbh and you can use all scx10 parts only real problem is transmission and diff I haven't had an issue with mine yet but you can get some ebay alloy transmission for cheap over all not to bad and I have genuine sx10iis

Sent from my SM-G965F using Tapatalk

Would the diffs fit these?

https://www.amainhobbies.com/axial-h...xi30395/p22052

[hillbillyrc]

If this is a scx10.2 clone then scx10.2 parts most likely will fit.

Those diff gears are og scx10 not scx10.2

[tuxstang]

The Injora chassis has axles that looks like SCX10.2 ones, but only looks like ... if you take a good look at them, you'll notice their pinion is centered on the axle unlike on 10.2's axles and the ring and pinion are straight cut.

[nzrc]

Originally Posted by tuxstang

The Injora chassis has axles that looks like SCX10.2 ones, but only looks like ... if you take a good look at them, you'll notice their pinion is centered on the axle unlike on 10.2's axles and the ring and pinion are straight cut.

Yeah, that actually works for me since I already have some of the hardend Axial bevel sets

[nzrc]

Originally Posted by JKMIDDY22

I bought one the other day just for a look and it's not that bad tbh and you can use all scx10 parts only real problem is transmission and diff I haven't had an issue with mine yet but you can get some ebay alloy transmission for cheap over all not to bad and I have genuine sx10iis

Sent from my SM-G965F using Tapatalk

How's the bump steer with CMS and 4 link?

[Hacks]

Originally Posted by tuxstang

The Injora chassis has axles that looks like SCX10.2 ones, but only looks like ... if you take a good look at them, you'll notice their pinion is centered on the axle unlike on 10.2's axles and the ring and pinion are straight cut.

I love that the '45 degree' steering angle picture isn't actually 45 degrees.

Im guessing that the diff housings must be slightly larger that the scx10ii if they are using the same gears as the scx10 diffs?

[nzrc]

Ok, in the end I decided to go with the Remo Hobby 1093. Cheap as chips and it's a mix of SCX10 (axles) and SCX10 ii (suspension layout). Comes RTR but will be getting the usual upgrades of course

https://youtu.be/1tyM3wcu4Kc
https://youtu.be/0JVP0WTDpAY

[Hacks]

Originally Posted by nzrc

Ok, in the end I decided to go with the Remo Hobby 1093. Cheap as chips and it's a mix of SCX10 (axles) and SCX10 ii (suspension layout). Comes RTR but will be getting the usual upgrades of course

https://youtu.be/1tyM3wcu4Kc
https://youtu.be/0JVP0WTDpAY

That looks like an affordable platform to build on. You should review it here so others can see if its a good option for a budget build.

[nzrc]

Originally Posted by Hacks

That looks like an affordable platform to build on. You should review it here so others can see if its a good option for a budget build.

Definitely

[marcod13]

Originally Posted by nzrc

Yeah, that actually works for me since I already have some of the hardend Axial bevel sets

Can you tell me if the Axial bevel sets fit in the Injora axles? I have an Injora chassis coming tomorrow


Thanks!