mostly 3d printed 34 is ford
 

so I have been designing this truck for nearly a year. Its loosely based of a 34 ford pickup and a dodge m37 bed. So as i am nearly finished I thought I would post it on here.

So nearly everything is 3d printed the only things that are not are the driveshafts to the axles the gearbox and transfer case the axle internals and the electronics.

Oh and the axles use cheap scx10 internals and bearings.

Re: mostly 3d printed 34 is ford
 

here are some pictures of the progress
https://i.imgur.com/lxJaIzB.jpg https://i.imgur.com/zPqRwyn.jpg
https://i.imgur.com/RHjzIY2.jpg
https://i.imgur.com/EgXQyef.jpg

Re: mostly 3d printed 34 is ford
 

Nice start!

Re: mostly 3d printed 34 is ford
 

This is awesome!

Sent from my Pixel using Tapatalk

Re: mostly 3d printed 34 is ford
 

Hi thanks guys. So i have done a little more. I have made new rear shock mounts to lower it made the rest of the bed sides and started the hood.
https://i.imgur.com/oYi99Gf.jpg
https://i.imgur.com/5qn6bLs.jpg
https://i.imgur.com/KYkwlOo.jpg

Re: mostly 3d printed 34 is ford
 

I am right into threads like this. I see a pickup, a semi and a train. She needs to be driven standing up or sitting on a stool. Needs a bed full of coal...

Re: mostly 3d printed 34 is ford
 

I have to agree with you man. It might get a few things like that the bed of coal I can defiantly see happening at some point

Re: mostly 3d printed 34 is ford
 

So i have done a little more today. I have added the hood sides they need a small bit of clearancing for the shock spacers but they at least work.
https://i.imgur.com/fq0h6hr.jpg
https://i.imgur.com/NfH3jbB.jpg

Re: mostly 3d printed 34 is ford
 

So another day another part
https://i.imgur.com/4iYOozI.jpg
https://i.imgur.com/DIIYvfK.jpg