G-Speed Rigs Only

[B-MOW71]

Originally Posted by brash

Finally finished it, first time on the rocks today and it blew my mind. Almost like hard lines are no challenge for this thing. Kind of shocked me.

Great looking G-rig! Sittin' nice and low! I've always like this body! Great color too! I think this is the first GSpeed rig I've seen with the OG AX10/SCx10 axles.

Originally Posted by c0bra

Still a work in progress but it’s coming along. Note in the second pic the axles are not mounted to the chassis at all

Sent from my iPhone using Tapatalk

Lookin' good! Can't wait to see more!

My V1-C1 build has been on hold. Looking to get back on it soon!

[fastgixxerlv]

Freshy! Parts in video description. Dravtech shock on the way. Right now these are axials with scx24 40mm shock hard springs under the piston. Maybe spend a little more on the wheels? These cheap ones seep to work fine. Tried out the incision clone driveshafts and had to cut so they’ll be replaced with real ones eventually now I know what size to get. Axles aren’t so bad. If they break I’ll replace with better ones.

https://youtu.be/uhXaYDk4OUM





Sent from my iPhone using Tapatalk

[indybama]

Decided it was a pretty nice day out, lets go to cheaha. So i charged up some batts n headed out. Took all 3 gspeed rigs, but only ran 2. Finally got some good run time in with the c1, ill have vids uploaded tonite sometime. But heres a few pics of the c1

Sent from my SM-A516V using Tapatalk

[fastgixxerlv]

Sent from my iPhone using Tapatalk

[fastgixxerlv]

Originally Posted by fastgixxerlv

Sent from my iPhone using Tapatalk

https://youtube.com/shorts/Z0T8G0oQyVI?feature=share


Sent from my iPhone using Tapatalk

[Goro Majima]

The FlexJ40 and military FJ45.

[indybama]

Heres a short vid of my c1

https://youtu.be/gRPzFY_gnUg

[indybama]

And heres a longer vid. Mind the amutuer cameraman lol. I was using my phone, need to get a gopro with a stick to get better shots

https://youtu.be/2cb4Ihh8R0k

[B-MOW71]

Originally Posted by indybama

Decided it was a pretty nice day out, lets go to cheaha. So i charged up some batts n headed out. Took all 3 gspeed rigs, but only ran 2. Finally got some good run time in with the c1, ill have vids uploaded tonite sometime. But heres a few pics of the c1

Sent from my SM-A516V using Tapatalk

Great pics bama! I'll be headed to the Tube to check out the vids!

Originally Posted by fastgixxerlv

Sent from my iPhone using Tapatalk

Great looking G-Shot! Nice pics too!

Nice tire/wheel combo! Love them ProBuilds!

Originally Posted by Goro Majima

The FlexJ40 and military FJ45.

Lovin' these Yota's!! Very nice builds!

I need to pick me up one of those FJ45's for a future build!

[indybama]

Thanks brian! I wanted to get some vid of the phoenix n my tucked ford, but was havin to much fun with the c1. Ive gotta get a different set of slider or cut these down, they catch everything because they stick out way to far

[B-MOW71]

Originally Posted by indybama

Thanks brian! I wanted to get some vid of the phoenix n my tucked ford, but was havin to much fun with the c1. Ive gotta get a different set of slider or cut these down, they catch everything because they stick out way to far

I hear ya on the fun with the C1! Hear lately I've been into more of the smaller scale class 1 builds. Speaking of that, I still need to get me a$$ in gear and get my V1-C1 G-rig done!

I can see how the sliders would catch on everything. I wonder if the metal sliders designed for the Mojave II body would fit it?!?! Those sliders may tuck in tighter.

[indybama]

Originally Posted by B-MOW71

I hear ya on the fun with the C1! Hear lately I've been into more of the smaller scale class 1 builds. Speaking of that, I still need to get me a$$ in gear and get my V1-C1 G-rig done!

I can see how the sliders would catch on everything. I wonder if the metal sliders designed for the Mojave II body would fit it?!?! Those sliders may tuck in tighter.

Thanks brian, ill check into those. Down side is im runnin the vs4-10 sliders, so the rock slider part would need to bolt up the same. Ive got the vs4 ones somewhere, just cant find them

[Fricker08]

Went to run my 4ws v3 on Sunday, plugged a battery in with it on the hood of my truck before attempting to drive it up my windshield like I do from time to time. When I heard a rather strange noise and the truck wouldn’t move.. instead of investigating right away I did what any normal person would do, and tried to power through it.. when parts started falling out.. d’oh!
The cheap “kyx” universals in the rear spit a pin out which broke the housing and the universal itself. So I grabbed some kyx housings because the stock plastics are on backorder, vp is a little rich for my blood and these were about half the cost of treals. Guess we will see how well they hold up.
I’d recommend some glue or jb weld over the small pins in the future.




Sent from my iPhone using Tapatalk

[B-MOW71]

Originally Posted by indybama

Thanks brian, ill check into those. Down side is im runnin the vs4-10 sliders, so the rock slider part would need to bolt up the same. Ive got the vs4 ones somewhere, just cant find them

That's right. I forgot you are running them sliders.

I forget where I've seen it, but somebody made a set of steel sliders that attached to the VS4-10 sliders. (Might have been Matt from SBG or possibly Harley) That may be an option if you could fab some up.

Originally Posted by Fricker08

Went to run my 4ws v3 on Sunday, plugged a battery in with it on the hood of my truck before attempting to drive it up my windshield like I do from time to time. When I heard a rather strange noise and the truck wouldn’t move.. instead of investigating right away I did what any normal person would do, and tried to power through it.. when parts started falling out.. d’oh!
The cheap “kyx” universals in the rear spit a pin out which broke the housing and the universal itself. So I grabbed some kyx housings because the stock plastics are on backorder, vp is a little rich for my blood and these were about half the cost of treals. Guess we will see how well they hold up.
I’d recommend some glue or jb weld over the small pins in the future.

Sent from my iPhone using Tapatalk

Ouch! Curious to hear how the KYX housings hold up. I've seen them, but never tried them.

[indybama]

The ones ive got are from rc4wd. They have another style, but same issue, theyre to wide for this body. Theyre more for the wider vs4 body. I think, if i can find the original plastic ones, theyd work perfect. Just cant remember where in the world i put the dang things

[TBuggy]

Not as nice of scenery as some of your guys' posts but here are some back yard pics.

My class 2
BE52A7EA-DC68-46F2-8185-8E7CE4AD9F40 by T Buggy, on Flickr

BB07B392-899F-4691-A58E-0493DB38CE2A by T Buggy, on Flickr

87421506-438E-4AE6-A519-A19F92BA1F31 by T Buggy, on Flickr

My Cheater
8FE76F2F-081A-4455-80D3-441C93CE8033 by T Buggy, on Flickr

949DD621-2D32-4A7E-ADAD-99E2428AD357 by T Buggy, on Flickr

C2262097-EB7F-4E0A-8565-E063A538D766 by T Buggy, on Flickr

DDE8B841-4DFA-4081-AB23-AEE5211CA27F by T Buggy, on Flickr

[fastgixxerlv]

More of the Gshot. Love this thing.

https://youtu.be/uictVYgkFBE






Sent from my iPhone using Tapatalk

[brash]

Originally Posted by B-MOW71

Great looking G-rig! Sittin' nice and low! I've always like this body! Great color too! I think this is the first GSpeed rig I've seen with the OG AX10/SCx10 axles.

Thanks mate, In Australia parts and know how are hard to come across, so sometimes the old stuff is all we can get and luckily works really well. This rig amazes me with the lines it can pull, a few small mods to make it C2 legal here and hopefully can do well with it.

[indybama]

Met up with some buddys i met at scale nats yesterday. Had a great day out, lots of awesome lines. Wish i had got a vid of us hittin this line. The wall is 5 n half ft tall n almost straight up.

Remember, the tree master is watchin your every move on the trail lol


But heres a couple of vids of my v3 phoenix, james' gladiator n honcho, n hoyts gk n deadbolt

https://youtu.be/7RIsVTUkDq4

https://youtu.be/AcrSlrVROIc

Sent from my SM-A516V using Tapatalk

[Lashlee]

I've played at that same spot, over on the back side at the nats as well as the last time I was down there!