| |
09-02-2021, 06:59 PM
| #161 | |
| RCC Addict Join Date: Mar 2011 Location: easton
Posts: 1,397
|  Re: G-Speed Rigs Only Quote:
I’m planning on using a builders kit 2 for my v3 build as well. I was debating on 10.3 portals but the element route just seems a lot better to do specially after seeing the one topher did Sent from my iPhone using Tapatalk | |
|  |
| Sponsored Links | |
| | |
|
09-12-2021, 04:51 PM
| #162 |
| Newbie  Join Date: Apr 2021 Location: Frederick
Posts: 14
| Re: G-Speed Rigs Only
Howdy everyone, been lurking on the forum for a little while now and thought I'd post up my current build after watching this thread and the awesome builds you all have done. I've never done a comp rig so I thought why not do a C2 just for fun and try the comp side. mine goes like this: V3 carbon element package (others were sold out at the time) Hardcore titanium HC links G-LD servo mount TGH FMM with 15% t-case TGH t-case adapter SSD pro44 rear stock ar44 front with aluminum link mounts (alum or brass c hubs and knucks if needed for weight) Boom racing HD topshaft Gspeed AR44 panhard mount things to get: dravtechs (have traxxas BB's on a 10.2 custom wanted to try something different) HH revolver or puller pro stubby (see how I like the noise) Mamba micro X body will most likely be the tamiya 350 body.. though I've always liked the clod... Hardbodies appeal a lot more to me than lexan and im willing to sacrifice some performance for points super shafty drive shafts. debating between HH servo or ShiftRC. servo winch Cookee   |
| |
|
09-12-2021, 05:07 PM
| #163 | |
| RCC Addict  Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: G-Speed Rigs Only Quote:
U got a good start there. Im buildin a c1 using the f350 body. Love my v3 rig though. Cant wait to see more of this one come together Sent from my SM-A516V using Tapatalk | |
|
| |
|
09-15-2021, 04:30 PM
| #164 |
| Pebble Pounder Join Date: Dec 2008 Location: Close
Posts: 177
| Re: G-Speed Rigs Only
G-speed's kickin' ass...  |
|
| |
|
09-15-2021, 06:10 PM
| #165 | |
| Pebble Pounder Join Date: Jun 2014 Location: Central Texas
Posts: 149
| Re: G-Speed Rigs Only Quote:
Cheers~ Gable | |
|
| |
|
09-27-2021, 10:00 AM
| #166 | |
| Go Buckeyes!   Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: G-Speed Rigs Only Quote:
 Looking forward to seeing more! You should consider making a build thread for this build! | |
|
| |
|
09-28-2021, 09:25 AM
| #167 |
| Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: G-Speed Rigs Only
Another project that I have been slowly working on for the past few months. A GSpeed V3-C3. I stole the axles out of my Axial Capra and decided to use the TGH 2.Low E.B.R Edition trans that I picked up earlier in the year. No build thread started yet, but may sit down and throw one together when I get time. Hoping to jump back on this build soon to get it finished up. Also need to get back on my V1-C1 (B-MOW's GSPEED V1-C1 Mojave Class 1 Build) build since @indybama re-lit the fire to get it done!    |
|
| |
|
09-30-2021, 12:39 PM
| #168 |
| Pebble Pounder Join Date: Aug 2018 Location: US
Posts: 151
| Re: G-Speed Rigs Only
I finished my first G-speed build the other day. Ended up going with some AR45Ps that came up for sale instead of the Element axles I originally started the build with. I can't wait to get it out and see how it performs!      |
|
| |
|
10-01-2021, 06:30 AM
| #169 | |
| Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: G-Speed Rigs Only Quote:
Can't wait to hear how it performs!
| |
|
| |
|
10-02-2021, 05:06 PM
| #170 |
| RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: G-Speed Rigs Only
Went to Cheaha State Park this mornin. Had a good trail run n then disaster hit lol. A buddy asked 'how fast will it go?' So i was gettin a vid for him n tryin to watch the truck on the phone. Hit a rock head on at full throttle. Thankfully the only thing damaged was the front driveshaft. But i think that was more from the full throttle at a dead stop than the hit, due to the center section being twisted. Time for incision driveshafts... I added a few scenic pics too. To bad i cant add vid too        Sent from my SM-A516V using Tapatalk |
|
| |
|
10-03-2021, 09:18 AM
| #171 | |
| Go Buckeyes! Join Date: Jun 2017 Location: Mid-Ohio
Posts: 4,134
| Re: G-Speed Rigs Only Quote:
Wow, that must have been a hard hit! I've never had a WB break. That may have just kept something else from exploding! Yep, agree on the Incision driveshaft upgrade. It's hard to beat them!!
| |
|
| |
|
10-06-2021, 12:11 AM
| #172 |
| Newbie Join Date: Sep 2018 Location: UK / South Wales
Posts: 7
| Re: G-Speed Rigs Only
Guys what's the advantage of using Element Stealth X trans over stock SCX10 II trans? Only reason I can think of is having overdrive but this can also be achieved with SCX10 trans by changing gears in the axle? Seen couple of rigs with Element Stealth X trans here but none with SCX10. |
|
| |
|
10-06-2021, 01:56 PM
| #173 |
| Newbie Join Date: Mar 2010 Location: Germany
Posts: 11
| Re: G-Speed Rigs Only
Hi, i need more Information about @Thedesertplumber an the clod buster from Thread #32 The look of The clod is very nice. I need more Photos from this comp. Can everybody help me ?? Thanks |
|
| |
|
10-06-2021, 08:43 PM
| #174 |
| Newbie Join Date: Nov 2017 Location: Az
Posts: 2
| Re: G-Speed Rigs Only
[QUOTE=ciechan;6094891]Guys what's the advantage of using Element Stealth X trans over stock SCX10 II trans? Only reason I can think of is having overdrive but this can also be achieved with SCX10 trans by changing gears in the axle? Seen couple of rigs with Element Stealth X trans here but none with SCX10.[/QUOTE One possibility is more overdrive with ft ring/ pinion od + stealth od. I run the 2low trans. and keep the stock r/p. |
|
| |
|
10-10-2021, 01:59 PM
| #175 |
| RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: G-Speed Rigs Only
Made it to cheaha again this weekend. Had a few mishaps but they were easy fixes. Got the front driveshaft in a bind a couple times n it popped apart. Headed back to the truck to leave n the panhard came loose from the axle. I seen the screw was out a bit, but it wouldnt turn, so i ran it lol. On the 2nd batt in the v3 n it backed out itself n got into the tire. Thankfully no damage to anything. Love goin up to cheaha! Pulpit rock is a better spot than Bald rock imo... Found bigfoots liquor rock too lol        Sent from my SM-A516V using Tapatalk |
|
| |
|
10-10-2021, 02:05 PM
| #176 |
| RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: G-Speed Rigs Only
These here are goin back to the truck to leave. Thats a steep hill u have to go down goin in n up goin out        Sent from my SM-A516V using Tapatalk |
|
| |
|
10-10-2021, 04:28 PM
| #177 |
| Rock Crawler  Join Date: Dec 2012 Location: Utah
Posts: 955
| Re: G-Speed Rigs Only
Awesome scenery |
|
| |
|
10-10-2021, 04:59 PM
| #178 | |
| RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: G-Speed Rigs Only Quote:
| |
|
| |
|
10-11-2021, 08:31 AM
| #179 | |
| I wanna be Dave Join Date: Sep 2011 Location: Douglassville, PA
Posts: 4,224
| Re: G-Speed Rigs Only Quote:
| |
|
| |
|
10-11-2021, 02:30 PM
| #180 | |
| RCC Addict Join Date: Nov 2017 Location: 3rd rock pile on the right
Posts: 1,799
| Re: G-Speed Rigs Only Quote:
| |
|
| |
 |
G-Speed Rigs Only - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| TF2 Transmission: R3 2-speed vs R3 single-speed vs R4 single-speed | Panther6834 | RC4WD Trail Finder 2 | 9 | 11-05-2019 12:40 PM |
| tf2 with 2 speed transmission and 2 speed transfer case | Teasley4Crawlers | RC4WD Trail Finder 2 | 9 | 12-02-2014 10:34 AM |
| F350 3 speed to single speed conversion, tips/ideas needed please | neo | 1.9 Scale Rigs | 10 | 02-11-2010 02:49 PM |
| single speed setup vs. speed control | traxxas junky | Electronics | 18 | 08-28-2007 11:28 PM |
| |
Linear Mode
