SSD TK builders kit/Gspeed V3?
 

Wanting to give a lcg chassis build a go. Debating on a Element V2 kit, Axial builders kit, or possibly a SSD TK kit (better donor parts) as a donor. Has anyone used the SSD TK as a donor for a Gspeed G3 chassis? Asking because the transmission and motor are mounted different compared to the SCX10ii and curious if the TK motor and transmission bolt up or is a fair deal of hacking required? Any and all feedback is much appreciated.

Re: SSD TK builders kit/Gspeed V3?
 

I don’t think I’ve seen this done on a v3 but if you’re comfortable drilling into the rails then anything is possible. You could always sell the transmission to someone doing a C1 build and snag a 2.low or stealth x or something to put in your gspeed as well.

The enduro swaps over to the gspeed pretty easily, I have a thread on here a little while back that gets into the details of my experience with an element kit and gspeed v3. Made for a great rig.

Re: SSD TK builders kit/Gspeed V3?
 

Thanks Topher. I'm probably gonna go with the new Element Builders’s kit then. Not a big fan of the axle design and wish the pinion shaft was angled up a bit for clearance, but I’ll live with it. Like the overdrive setup in the Element tranny, and better shocks than the SCX10ii builders kit. Thanks again.

Re: SSD TK builders kit/Gspeed V3?
 

Hmm, got me curious about that SSD TK in a v3 chassis or a v1c1 chassis lol. Man i need a 2nd job just to fund some of the projects i wanna build.

Re: SSD TK builders kit/Gspeed V3?
 

With the popularity of the Gspeed chassis kits and the SSD TK kit there has to be someone who gave it a go. Lol.

Re: SSD TK builders kit/Gspeed V3?
 

Tim from trdadventures on youtube said he had a v1c1 using the ssd tk kit. Still makes me wanna try it out with a v3 chassis lol