Runnin2live’s Gspeed V4 build
 

So I pulled the trigger on a Gpeed V4 frame set, TGH dual servo mount, low pro bed, spacer kit and monster bag of hardware.

My plan is to make me a LCG on AR44’s.

Kit came in and here’s the progress so far

https://uploads.tapatalk-cdn.com/202...082511fe99.jpg
https://uploads.tapatalk-cdn.com/202...e0d0d28362.jpg


Sent from my iPhone using Tapatalk

Re: Runnin2live’s Gspeed V4 build
 

Following along to see this build come together!

Nice choice on the chassis rails and other bits! The Team KNK Monster Bag is a must have!"thumbsup"

Re: Runnin2live’s Gspeed V4 build
 

Yep, KNK has already come in handy on a couple other trucks

Re: Runnin2live’s Gspeed V4 build
 

https://uploads.tapatalk-cdn.com/202...d2f889af23.jpg
Made a little progress. Mounted the transmission after a complete tear down and grease. I’m happy with the fitment of the transmission. Milling and everything looked really nice.

I’m using Capra shocks. I built them with the lighter full length spring. Once I get it rolling I will most likely do the pen spring mod to get full squat and cut the spring back if needed.

More stuff coming. I’m excited I just got my tracking number from Hardcore rc for my links


Sent from my iPhone using Tapatalk

Re: Runnin2live’s Gspeed V4 build
 

The mail man was kind to me today.

Motor and HW 1080 came in today. I placed the order today for 2 different bodies; Jconcepts Creep and Toyota honcho. Not sure yet which one I’m going with. I will https://uploads.tapatalk-cdn.com/202...5b32cdf654.jpg
decide when they get here.

https://uploads.tapatalk-cdn.com/202...4b107997d0.jpg


Sent from my iPhone using Tapatalk

Re: Runnin2live’s Gspeed V4 build
 

I’m still waiting on my links. I had some issue with that but seems to all be worked out now.

I’m moving forward with the Hilux body. Cut it down tonight just to start fitting it. After putting the body on, I ordered a lay down servo mount so I can get the body much lower. https://uploads.tapatalk-cdn.com/202...65b3db0ce4.jpg


Sent from my iPhone using Tapatalk

Re: Runnin2live’s Gspeed V4 build
 

Well I got my links in finally through a little struggle with my ordering. I’ve assembled everything. I had my skid plate in the way I thought I needed it but had to flip it because the motor and top right rear link were not getting along very well. Will test out tomorrow and post pics to follow.