RCCrawler Forums

chip cross · 07-03-2007, 12:52 AM

well I am not a Ferd man i figured i would do something useful with my highlift axles and chassis

do a paint job on it like my old 1:1
R2 tranny 55t lathe with a short shaft and pre drilled holes
pede steel yokes and drive shafts
xrs esc hitec 645 steering servo traxxas rx/tx

@tw!ll · 07-03-2007, 01:09 AM

Looks like a good start Chip, I'll be watching this one.

chip cross · 07-03-2007, 01:14 AM

the WB is right on the money now if i can pull that paint job off i have only seen one truck painted like my old 1:1 it was like a mint metal flake and pastel pea green 2 tone and it was factory paint for 1976 i check the paint code in the glove box thanks @tw!ll

truckerbuddy2 · 07-03-2007, 09:42 PM

gota see this one when its done... its gota do better than the old high lift did.. lol...

chip cross · 07-03-2007, 11:47 PM

yea it will be alot better since i took the anchor out i mean the 3 speed i am putting a R2 tranny in it waiting for it to come in from http://www.rpphobby.com/

obijuan · 07-04-2007, 10:31 AM

lose them shocks too man, and for the love of god paint the vent windows black!

mrmaxxman · 07-04-2007, 12:31 PM

dude that looks just like my old 78 3/4 ton only it was blue!!!i miss that truck bad, i need to scan some pics of it....

cembom · 07-04-2007, 02:19 PM

Hey um is the tail gate on the 1:1 totally rusted??? Anyways lol I cant wait I love chevys. I need to get another k5 body. I wish I could get one of those usa 1? chevy grillz

chip cross · 07-05-2007, 01:25 AM

Quote:

Originally Posted by cembom

Hey um is the tail gate on the 1:1 totally rusted??? Anyways lol I cant wait I love chevys. I need to get another k5 body. I wish I could get one of those usa 1? chevy grillz

na its off of a brown truck

chip cross · 07-05-2007, 01:28 AM

Quote:

Originally Posted by obijuan

lose them shocks too man, and for the love of god paint the vent windows black!

oyea vent window are gonna be black drip rail around top of the door chrome i just can't fig. out my paint color so many good look color op. i want to pick the right one

mississippirocs · 07-05-2007, 07:24 AM

I found these! I vote for the gold/white two tone! But you need to cut the top off and build a rollcage!

obijuan · 07-05-2007, 11:09 AM

Quote:

Originally Posted by chip cross

oyea vent window are gonna be black drip rail around top of the door chrome i just can't fig. out my paint color so many good look color op. i want to pick the right one

actually the drip rails are body color on K5s FYI.

mazdaparts · 07-05-2007, 11:55 AM

So what are you doing with the stock "ferd" body?

chip cross · 07-05-2007, 11:58 AM

braceysdad is getting it

braceysdad · 07-05-2007, 12:51 PM

Quote:

Originally Posted by chip cross

braceysdad is getting it

Why yes, yes I am

chip cross · 07-05-2007, 03:12 PM

Quote:

Originally Posted by obijuan

actually the drip rails are body color on K5s FYI.

thanks for the schooling matt i have never owned a K-5 i thought it was like the 3 pickups i had

sure do like the looks of this hog

obijuan · 07-05-2007, 03:52 PM

AWW MAN i have always loved that rig, its like one fo the first you see when you look at ck5 gallery, thats a bad truck now man.

chip cross · 07-05-2007, 06:46 PM

got around to cutting the body out to night working on the ride height gonna paint it up on my days off

mississippirocs · 07-05-2007, 06:55 PM

I still vote for topless! It looks like the ride height is perfect! All it needs now is paint and a set of mudslingers! Have you decided on a color yet?

chip cross · 07-05-2007, 07:00 PM

oyea its gonna be topless just got to get to body mounted then the top comes off i wanna do i orange and white

07-03-2007, 12:52 AM	#1
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	MY Kblazer well I am not a Ferd man i figured i would do something useful with my highlift axles and chassis do a paint job on it like my old 1:1 R2 tranny 55t lathe with a short shaft and pre drilled holes pede steel yokes and drive shafts xrs esc hitec 645 steering servo traxxas rx/tx Last edited by chip cross; 07-03-2007 at 01:05 AM.

07-03-2007, 01:14 AM	#3
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	the WB is right on the money now if i can pull that paint job off i have only seen one truck painted like my old 1:1 it was like a mint metal flake and pastel pea green 2 tone and it was factory paint for 1976 i check the paint code in the glove box thanks @tw!ll Last edited by chip cross; 07-03-2007 at 01:17 AM.

07-05-2007, 07:24 AM	#11
mississippirocs RCC Addict Join Date: Feb 2007 Location: MS Coast Posts: 1,535	I found these! I vote for the gold/white two tone! But you need to cut the top off and build a rollcage! Last edited by mississippirocs; 07-14-2007 at 08:01 PM.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/1-9-scale-rigs/76707-my-kblazer.html
Posted By	For	Type	Date
Proline Chevy Blazer body - RCCrawler.com Bulletin Board	This thread	Refback	10-04-2011 03:02 PM

07-03-2007, 01:09 AM	#2
@tw!ll RCC Addict Join Date: Feb 2006 Location: Medford, Oregon Posts: 1,261	Looks like a good start Chip, I'll be watching this one.

07-03-2007, 09:42 PM	#4
truckerbuddy2 Quarry Creeper Join Date: Aug 2006 Location: louisiana Posts: 324	gota see this one when its done... its gota do better than the old high lift did.. lol...

07-03-2007, 11:47 PM	#5
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	yea it will be alot better since i took the anchor out i mean the 3 speed i am putting a R2 tranny in it waiting for it to come in from http://www.rpphobby.com/

07-04-2007, 10:31 AM	#6
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	lose them shocks too man, and for the love of god paint the vent windows black!

07-04-2007, 12:31 PM	#7
mrmaxxman Rock Crawler Join Date: Apr 2004 Location: toolsa, jokelahoma Posts: 501	dude that looks just like my old 78 3/4 ton only it was blue!!!i miss that truck bad, i need to scan some pics of it....

07-04-2007, 02:19 PM	#8
cembom Rock Crawler Join Date: Jun 2007 Location: Flint/Mt. Morris Posts: 570	Hey um is the tail gate on the 1:1 totally rusted??? Anyways lol I cant wait I love chevys. I need to get another k5 body. I wish I could get one of those usa 1? chevy grillz

07-05-2007, 11:55 AM	#13
mazdaparts Quarry Creeper Join Date: Jul 2005 Location: Oran, MO Posts: 347	So what are you doing with the stock "ferd" body?

07-05-2007, 11:58 AM	#14
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	braceysdad is getting it

07-05-2007, 03:52 PM	#17
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	AWW MAN i have always loved that rig, its like one fo the first you see when you look at ck5 gallery, thats a bad truck now man.

07-05-2007, 06:46 PM	#18
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	got around to cutting the body out to night working on the ride height gonna paint it up on my days off

Sponsored Links

07-05-2007, 06:55 PM	#19
mississippirocs RCC Addict Join Date: Feb 2007 Location: MS Coast Posts: 1,535	I still vote for topless! It looks like the ride height is perfect! All it needs now is paint and a set of mudslingers! Have you decided on a color yet?

07-05-2007, 07:00 PM	#20
chip cross ΜΟΛΩΝ ΛΑΒΕ Join Date: Dec 2006 Location: In tha Bush of Louisiana Posts: 4,343	oyea its gonna be topless just got to get to body mounted then the top comes off i wanna do i orange and white

RCCrawler Forums

Thread: MY Kblazer