1.9 fj 40 build this is my first scaler so all tips are welcome8) specs body:bushwacker tires:high lift wheels:high lift body color:racing green and white roof frame: custom made obijuan chassis tranny:wk motor:35t for now esc:.?????? gearing:stock wk 2 tower pro servos1 sterring 1 winch pede shafts 4-link with coil overs sofar ive gotten the read susp made and installed body. ive made a winch mount made so it sits on top of the trans. the ride heigh will be lower then it is right now8) and that it for now. pics http://img2.putfile.com/thumb/9/25815465657.jpg mounts for the bumper http://img2.putfile.com/thumb/9/25815465665.jpg tranny,winch mount an the coil overs http://img2.putfile.com/thumb/9/25815465664.jpg link setup... i know its not perfect but it flexes like a leaf sprung truck:| http://img2.putfile.com/thumb/9/25815465631.jpg servo mount agian(winch) http://img2.putfile.com/thumb/9/25815465714.jpg |
looks good so far for a esc i would use a lrp cause it comes water proof and is a great and cheap esc body color go with a tanish color like sand then put a white top on it |
looking good chris, i like it so far. i agree with the tan, itll look good. and your 4 link looks good, but i sugest getting some sort of sideways mount, it looks cleaner, and its stronger"thumbsup" |
thanks i may go with the tan but iam thinking more of a green with a white top and if your wondering the tapped out area is where iam gonna cut"thumbsup" |
well ive decided that a full tube frame is a little bit to complecated for me right now so iam gonna run a full body with a minor exo8) and ive painted most things chrome flat black8)and put the body on the right place http://img2.putfile.com/thumb/9/25922125562.jpg http://img2.putfile.com/thumb/9/25922125426.jpg http://img2.putfile.com/thumb/9/25922125468.jpg this is almost maxin it out!(rear only) http://img2.putfile.com/thumb/9/25820131997.jpg camon guys tell me what you think about this"thumbsup" |
1 word wow! looks great im digging the bush wacker body and the look as a whole keep up the good work |
looking good i think the green will look sweet i would recomend putting some turned down tlt shocks on there that would look sweet keep us updated |
update still need to paint the roof white and make bumpers and front susp links here some crappy teaser pics for now till i finish it as a roller;-) http://img2.putfile.com/thumb/9/26120532689.jpg http://img2.putfile.com/thumb/9/26120532657.jpg |
lookin good i would recommend shortening your springs;-) |
thanks for the complements its a roller!!!!! need to trim the srings down just a hair tho:roll: here are the body and rolling chassis...only thing left to do is paint the roof white. http://img2.putfile.com/thumb/9/26123172987.jpg http://img2.putfile.com/thumb/9/26123172987.jpg http://img2.putfile.com/thumb/9/26123172961.jpg http://img2.putfile.com/thumb/9/26123172931.jpg flex http://img2.putfile.com/thumb/9/26123172935.jpg once i make body mounts ill remove the tape"thumbsup" |
nice, shorter springs and itll be sweet-er"thumbsup" |
Not bad, Not bad at all little man! "thumbsup" |
|
trim that body a lil more.....like the color tho... |
lower the body some, it looks like its got a big ol body lift on it. and those coil springs are out of control. |
i will lower it, i just sat on the chassis to see what my truck will look like. and i have finished the trimming"thumbsup" i have not started to peice together my bumpers. and i decided justt to go ahead an paint the roof green.8) will update once i finish the front bumper more. |
here is some pics of the bumpers befor i go to school http://img2.putfile.com/thumb/9/26223324968.jpg http://img2.putfile.com/thumb/9/26223324957.jpg http://img2.putfile.com/thumb/9/26223324888.jpg |
looks nice, good job"thumbsup" |
re did the bumper, still need to braze it http://img2.putfile.com/thumb/9/26420400060.jpg http://img2.putfile.com/thumb/9/26420395988.jpg http://img2.putfile.com/thumb/9/26420395957.jpg |
looks good man"thumbsup" |
All times are GMT -6. The time now is 06:57 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com