|
| LinkBack | Thread Tools | Display Modes |
12-28-2010, 05:59 AM | #1 |
Newbie Join Date: Jul 2010 Location: Traverse City
Posts: 2
| CReating completely custom Scaler
I am using Losi Nightcrawler axles (all i have) and was wondering how i should attach leaf springs? Or cheap axles that leaf springs easilly attach to. I would prefer the Losi axles because I am low on cash. Thnks |
Sponsored Links | |
12-28-2010, 08:12 AM | #2 |
RCC Addict Join Date: Sep 2005 Location: Behind the torch!
Posts: 1,360
|
I did a build with a leaf sprung losi axle in the rear. What I did was cut a delrin block to fit in between the shock/link mounts and used a screw to attach it then I drilled a hole in the delrin to attach the leaf spring. This is the only pic that I could find. Here's the whole build: StIcK kInG's Losi SCX Yota Hope that helps |
12-28-2010, 08:27 AM | #3 |
Newbie Join Date: Jul 2010 Location: Traverse City
Posts: 2
|
Sweet build! thanks for the help
|
Tags |
custom, ideas, leaf springs, losi, scaler |
Thread Tools | |
Display Modes | |
| |