Scale Crawler Picture Archive (PICTURES ONLY!) 2 Attachment(s) Post up the pics of you scale rigs for others to drool over. Also put up some specs. :) Truck Base : Body: ESC: Motor(s): Servo(s): Trans: Axles: Tires: WB: Overall Width: Diff clearance: Center Chassis clearance: Overall height: Weight: New scale truck I got. Haven't dicided on a body yet though. ********** Edited by Bender ********** I turned this into a Sticky. Let's keep this thread for stats and pics only, no chit-chat please!! |
The Barnyard Buster 1 Attachment(s) Truck Base : CNC'd aluminum ladder frame Body: HPI Bronco ESC:Futaba MC330CR Motor(s):Integy 55t Servo(s):JR ST125MG, chassis mounted Trans:Pede Axles:TLT Tires:Swamp Dawgs WB:11-3/4" Overall Width:9.5 Diff clearance:1-3/8 Center Chassis clearance: 2.75" Overall height: 11" to the top of the KC's Weight: 6 lbs +/- |
Truck Base: TLT Body: HPI Bronco ESC: Tekin Rebel 2 Motor(s): Integy 55t lathe Servo(s): Hitec HS645MG x 2 Trans: Associated RC10B4 Stealth Axles: TLT Tires: Moab WB: 11.75" Overall Width: 9.75" Diff clearance: Center Chassis clearance: 2.75" Overall height: 10" Weight: ??? http://i2.tinypic.com/ta3fxi.jpg |
hacked up tlt chassis moabs 55t pede locked and loaded http://img.photobucket.com/albums/v1...t/P1010892.jpg |
heres mines one its kind of trail rig i would say hope you like it!!!!:mrgreen: Truck Base: SW2 Body: Ford courier ESC: Stock tamiya?? Motor(s): Integy 55t lathe Servo(s): JR 4800 Trans: Stampede Axles: TLT Tires: Moab WB: 8.50 Overall Width: 12.25 Diff clearance:1.50 Center Chassis clearance: 3.25 Overall height: 10" Weight: ??? http://i5.photobucket.com/albums/y16...rawlers-12.jpg http://i5.photobucket.com/albums/y16...rawlers-09.jpg http://i5.photobucket.com/albums/y16...rawlers-11.jpg hope you liked it..........:mrgreen: |
3 Attachment(s) Mile high! AI runner esc CS-70 servo Pede tranny 55turn lathe motor Several tires, dirt works, moabs, losi smashers. 5# RTR |
5 Attachment(s) TLT Tuber landcruiser Build thread: http://www.rccrawler.com/forum/2-2-scale-rigs/26095-land-cruiser-tuber-scale-buildup.html Specs: TLT axles with tobee wideners (painted flat black) Yoko geolanders, pede wheels, with rck 3rd gen rock rings pede tranny mounted under the hood, with a transfer case in the middle of the chassis. 55t lathe Super rooster Hitec 945MG Integy shocks, losi springs (30wt oil) 11.5" wheelbase Partial interior with recaro seats |
Truck Base: brake line frame rails Body: Chev C10 ESC: Super Rooster Motor(s): Mag Mayhem Servo(s): Hitech 645 Trans: Stampede Axles: TLT Tires: Mashers/Swamp Dawgs WB: 11.625 Overall Width: 10.25 Diff clearance:1.50 Center Chassis clearance: 3 Overall height: 9.75 Weight: 6-8 pounds http://img.photobucket.com/albums/v7...T/P4090008.jpg http://i40.photobucket.com/albums/e2...t/P3260063.jpg http://i40.photobucket.com/albums/e2...t/P2190036.jpg |
I am not sure mine is Scale or just a TLT Crawler. I don't have seats or an interior for that matter, but I do have head/tail/undercarriage lights, a license plate, and is full bodied (bumpers, flares, etc still in tact). However, it is only a body on top of a TLT Crawler so you decide what it is. This is my second crawler to the Slinky Family. Truck Base : Home made 3 piece aluminum tube and plate chassis Body: Jeep Rubicon ESC: Rooster Motor(s): 55T Lathe (of course) Servo(s): Hitec 645 Trans: Losi XXX with Stampede shafts Axles: TLT-1. No better place for this, but I run pretty blue coil over shocks that are no where near scale Tires: Moabs. I don't run any weights in the tires and it seems to perform decently WB: 12.25 Overall Width: Stock axle width Diff clearance: Stock clearance with Moabs. I am letting the rocks grind down the axles. Center Chassis clearance: 2.75" I think Overall height: Suuuuuuuuuper high Weight: 3.8 lbs http://www.nor-calrcrc.com/albums/be...9mar06/acf.jpg http://www.nor-calrcrc.com/albums/be...9mar06/aak.jpg |
Truck Base : Cut down TXT chasis w/ Clod axles Body: '72 Chevrolet C-10 w/ FUBAR'd paint job ESC: Novak Super Rooster Motor(s): Integy 55's w/ 13t's Servo(s): JR590 Trans: NA Axles: Clod w/ full bearings, alumin. knuckles, alumin. lockers, & carbon fiber axle braces Tires: Masher 2k's- Waiting on 2.2 Red Rocks to get here... WB: 12" Overall Width: 12.5" (New 'Pede rears will narrow that a fair amount when new tires get here) Diff clearance: 1.5" Center Chassis clearance: 4.25" Overall height: 9.5" Weight: 5.5lbs http://www.offroadworld.net/gallery/Ranovru/147288.jpg http://www.offroadworld.net/gallery/Ranovru/147289.jpg http://www.offroadworld.net/gallery/Ranovru/147291.jpg http://www.offroadworld.net/gallery/Ranovru/147292.jpg |
Truck Base : Tuber Truggy Oregon built but reinforced by NorCal SICJ! Body: Toyota Tundra..............but it looks like a Ranger (IMO) ESC: XRS Motor: Integy 55 turn lathe Motor Servo: Futaba Trans: Pede Locked Axles: Tlt Locked Axles Tires: Moabs WB: 12" Overall Width: Need to measure Diff clearance: Need to measure Center Chassis clearance: Need to measure Overall height: Need to measure Weight: She's a pig! http://i44.photobucket.com/albums/f4...L/Truggy_2.jpg |
Tuf-100 1 Attachment(s) All this info on this truck was measured while i had the All-t's on.... Truck Base : Brando Build Ofcourse Body: Proline F-100 ESC: LRP Ai Runner Motor(s): silver can Servo(s): Hitec Trans: Pede Axles: TLT Tires: Imex: All-t's, Swampa's, Moabs WB: 11.5" Overall Width: 10.75" Diff clearance: 2" Center Chassis clearance: 3.25" Overall height: 10.75" Weight: 3.9kgs |
Scale Half cab Bronco: 11.5" WB 8.75" track width 2.5" center clearance 8.5" max height of cab Bender Customs chassis set up 60/40 TLT-1 Axles locked diffs Blackfoot stub shafts Stampede trany w/Jato shafts, 120T 64P spur 55t Lathe Motor, 16t 64P pinion HPI Geolander tires w/pie shape foams Traxxas rims w/rock rings 2 wheel steering 5 oz of bb's in each tire Click here for the build thread http://www.nor-calrcrc.com/albums/sc.../aab.sized.jpg http://www.nor-calrcrc.com/albums/sc.../aae.sized.jpg http://www.nor-calrcrc.com/albums/2006_comp1/abw.jpg |
Scale Toyota Flatbed (Mountaineer) Body: Mountaineer ESC: Super Rooster Motor: 55t Lathe Servo(s): Hitec 645MG Trans: Pede Axles: Mounty Tires: Geolanders WB: 12" Overall Width: 10" Center clearance: 2.5" Overall height: 9.5" Weight: 1 metric ton Click here for the build threads Click here for the build threads http://www.nor-calrcrc.com/albums/mo.../aab.sized.jpg http://www.nor-calrcrc.com/albums/mo.../aad.sized.jpg http://www.nor-calrcrc.com/albums/flatbed/abb.sized.jpg |
Chassis: Brand0 Built Body: Proline Ford Courier ESC: Super chicken Motor(s): 55t Lathe Servo(s): Hitec 645 mg Trans: Pede lay down locked w/ bearings Axles: TLT locked with bearings Tires: Proline 2.2 Moabs Wheels : traxxas, double narrowed WB: 11.5" Overall Width: 10.75" Diff clearance: 2" Center Chassis clearance: 2 7/8" Overall height: 8" Weight: 7.5 lbs http://www.nor-calrcrc.com/albums/album26/abo.sized.jpg http://www.nor-calrcrc.com/albums/album26/abq.sized.jpg http://www.rcrockgear.com/ORCRC_Comp...6/PICT8103.jpg |
Chassis: Brand0 Built Body: Proline Chevy C-10 ESC: Super chicken Motor(s): 55t Lathe Servo(s): Hitec 645 mg Trans: Pede lay down locked w/ bearings Axles: TLT locked with bearings Tires: Proline 2.2 Moabs w/ MSD Rock Rings Wheels : traxxas, double narrowed WB: 11.5" Overall Width: 10.75" Diff clearance: 2" Center Chassis clearance: 2 7/8" Overall height: 8" Weight: 7.5 lbs http://i40.photobucket.com/albums/e2...t/P3260099.jpg http://www.nor-calrcrc.com/albums/album16/aah.sized.jpg http://www.nor-calrcrc.com/albums/album16/aaj.sized.jpg |
Europa Truck Trial Rig 11.75" WB 8.25" track width 2.75" center clearance 11" max height of cab Bruder MB Astros truck body TLT-1 Axels locked diffs Custom aluminum Chassis Custom aluminum flat bed w/lexan A-frame tent Stampede trany w/Jato shafts, 84t spur 55t Lathe Motor, 12t pinion Captured spings w/Integy maxx soft blue springs Associated maxx shocks HPI Geolander tires firm w/pie shape foams Traxxas Bandit front rims w/rock rings 2 wheel steering 6 oz of bb's in each front tires, 4 oz of bb's in each rear tire 5 RCC stickers Click here for the build thread http://www.nor-calrcrc.com/albums/Unimog1/abe.sized.jpg http://www.nor-calrcrc.com/albums/Unimog1/aaz.sized.jpg http://www.nor-calrcrc.com/albums/da.../aav.sized.jpg |
Indy chassis : custom aluminum rear: tlt front: Ta02 front (indy suspention) tranny: pede (with custom gearbox to match ratios front to rear) body: proline mgt 1/8th scale silverado motor : mag mayhem esc: novak xrs radio: jr xr3i wb: 13.5 inches width: 8 7/8th center chassis clearance: 2 1/8th diff clearance: front 1 3/8th / rear 7/8th tires/wheels: narrowed pede wheels, rock rings, and proline dirt hawg tires http://img366.imageshack.us/img366/7015/dsc002352hu.jpg http://img269.imageshack.us/img269/8763/dsc003550bt.jpg http://img313.imageshack.us/img313/7569/dsc002368ja.jpg http://img198.imageshack.us/img198/9068/dsc003589az.jpg http://img333.imageshack.us/img333/6038/dsc002289xo.jpg Big Brother chassis: custom aluminum axels: tlt tranny: emaxx body: proline 1/8yh scale silverado motor: 55t integy lathe esc: novak xrs radio: jr xr3i wb: 13.5 inches width: 9 1/4 center chassis: 2 5/8th diff clearance: 1 1/4 wheels tires: hpi geolander tires, narrowed hpi spike wheels, rock rings http://img199.imageshack.us/img199/2360/dsc004267ny.jpg http://img427.imageshack.us/img427/3410/dsc004127vy.jpg http://img427.imageshack.us/img427/3010/dsc004274ew.jpg |
http://i47.photobucket.com/albums/f1...04-06_1330.jpg http://i47.photobucket.com/albums/f1...06-06_2047.jpg http://i47.photobucket.com/albums/f1...10-07_1843.jpg http://i47.photobucket.com/albums/f1...-07_1845-1.jpg here is my scale crawlers old ford/jeep 55 turn motor new ford stock motor all 3 have pede trannies. tires: swamp dawgs axles:tlt |
2 Attachment(s) Chassis: Team PRP Body: Hpi Bronco ESC: LRP Motor(s): 35t Lathe Servo(s): Hitec 645 mg Trans: Stampede Axles: TLT Tires: 2.2 Mashers, moabs, swamp dawgs Wheels : Hpi WB: 11.5" Overall Width: 10" Diff clearance: 1.5" Center Chassis clearance: 2.5" Overall height: 10" Weight: 2.7kg |
Chassis: Dorkstar Metalwerks Body: Ford Courier ESC: Super Rooster Motor(s): Magnetic Mayhem Servo(s): GWS Metal Geared Trans: Stampede Axles: TLT Tires: Geolandars, Moabs, Narrowed Mashers Wheels : Hpi WB: 11.6" Overall Width: ? Diff clearance: ? Center Chassis clearance: ? Overall height: ? Weight: ? http://www.orcrc.com/outings/PDRM3776.jpg http://www.orcrc.com/outings/c2.jpg http://www.rcrockgear.com/ORCRC_Comp...6/PICT8071.jpg |
Truck Base :TLT Body:Bronco Frame:Hillbilly tube ESC:Old school 610-hrv Motor:Hillbillywound 33t Servo(s):F-hitec 5995, R-hitec 645 Trans:Stampede Axles:TLT Tires:Moab WB:12" Overall Width:10 3/4 http://i53.photobucket.com/albums/g67/SrIrie/Bronco.jpg |
http://img.photobucket.com/albums/v7...sterjam011.jpg Truck Base : Kyosho 4runner TLT-A-FIED with EXO Body: 4runner ESC: JR Motor(s):Kyosho Servo(s): JR 650z Trans: locked PEDE Axles:locked TLT Tires: Moabs on original wheels WB: 12 1/2 Center Chassis clearance: more then 3 Overall height: 10 inches ? http://img.photobucket.com/albums/v7...G/100_1510.jpg http://img.photobucket.com/albums/v7...G/100_1491.jpg http://img.photobucket.com/albums/v7...20476368-1.jpg Truck Base : TLT (SOLD) Body: Ford Courier ESC: JR Motor(s): 55t lathe Servo(s): JR 650z Trans: Locked Stand up Pede Axles: locked tlt Tires: geolanders WB: 12" maybe? Weight: http://img.photobucket.com/albums/v7...er/ROCK010.jpg http://img.photobucket.com/albums/v7...r/100_0873.jpg http://img.photobucket.com/albums/v7...er/ROCK009.jpg Truck Base : Bruiser Body: Bobbed Mountaineer body ESC: SR Motor(s): Lathe Servo(s): 650z JR Trans: CUSTOM Juggsterr single speed trans and mount Axles: Bruiser with 4 rear hubs and wheel spacers up front Tires:moabs Other: Working winch, interior cage, bed cage, fuel cell, rear seating, Buggy leafed, bob'd bed, dual shock mounts more shiat then I can list http://img.photobucket.com/albums/v7...w/114_2397.jpg http://img.photobucket.com/albums/v7...w/114_2402.jpg http://img.photobucket.com/albums/v7...w/114_2389.jpg http://img.photobucket.com/albums/v7...w/114_2390.jpg Truck Base : Boyer Built frame (SOLD) Body: HPI Bronco body cut and dove tailed ESC: Novak SR Motor(s): 55T lathe Servo(s): Hitec high torque Trans: locked Stand up pede Axles: locked tlts Tires: Moabs on RPMS with Juggsterr rock rings http://img.photobucket.com/albums/v7...o/100_0677.jpg http://img.photobucket.com/albums/v7...o/100_0679.jpg Truck Base : HULK WERKS Pre runner Body: proline ford extended cab with TRUE FIRE paint scheme ESC: super rooster Motor(s): lathe Servo(s): Jr 590 up front, futaba 9402 in the back Trans: locked full metal geared PEDE Axles: locked tlts Tires: Moabs On RPM wheels with Juggsterr rock rings http://img.photobucket.com/albums/v7...n/100_0689.jpg http://img.photobucket.com/albums/v7...Therock013.jpg http://img.photobucket.com/albums/v7...Therock019.jpg Truck Base : Bruiser Body: Nissan Pathfinder body ESC: Tekin rebel 2 Motor(s): magneticmayhem Servo(s): hitec Trans: locked PEDE Axles: Bruiser with bearings, shimmed pinion, rear hubs all around Tires: soon to be mashers on custom Bruiser wheels http://img.photobucket.com/albums/v7...s/100_1379.jpg http://img.photobucket.com/albums/v7...r/104_1249.jpg http://img.photobucket.com/albums/v7...r/104_1251.jpg http://img.photobucket.com/albums/v7...4runner015.jpg Truck Base : high lift Body: high lift ESC: LRP water proof runner Motor(s): magneticmayhem Servo(s): JR high torque Trans: stock 3 speed Axles: stock with bearings and locked Tires: stock Wheels: Bruiser Builder custom aluminum wheels Extras: Scale Hobbies Cap, Juggsterr rear bumper and grill guard, sho dog customs fox shock resavoirs, 2.2s- narrowed claw dawgs.... all coming soon http://img.photobucket.com/albums/v7...rupdate006.jpg http://img.photobucket.com/albums/v7...trailer002.jpg http://img.photobucket.com/albums/v7...t/102_1222.jpg |
Truck Base : TLT Body: Rubi ESC: Rooster Motor(s): 55t Lathe Servo(s): Junk!! Trans: pede Axles: TLT Tires: Cut-N'-Shut Proline Dirt Hawgs WB: 12.5" Overall Width:? Diff clearance: ? Center Chassis clearance:3" Overall height: ? Weight: 5lbs RTR http://img111.imageshack.us/img111/821/td67de.jpg |
2 Attachment(s) here is my first attempt at a scale crawler. chassis: homemade nn copy red polycarbonate links too axles: clod locked with shoo goo esc: tekin rebel servo: hitec 645mg center chassis clearence: 4" wb: 12" thats all i have for now here is some pics.:roll: |
8 Attachment(s) Scale Hilux: Steel chassis TLT axles Pede tranny Winch front and rear Removable exocage Steel front bumper Bruiser body Pede rims HPI Geolandar tires |
Truck : Ole Red Truck Base : Home made Body: clod buster with homemade toolbox, reciever hitch, mirrors, cowl induction hood ESC: lrp runner Motor: 45T Lathe Servo: Hitec 645 ms Trans: 1st-stampede 2nd-nitro rustler Axles: TLT-1. Springs: Jugg leaf springs Tires: Moabs. WB: 11" Overall Width: Stock axle width Diff clearance: 1.5" Center Chassis clearance: 3" Overall height: 9.5" to top of cab Weight: ? lbs http://img171.imageshack.us/img171/1...d5small8oc.jpg http://img169.imageshack.us/img169/9...d4small6ys.jpg http://img159.imageshack.us/img159/458/n63sv.jpg |
Here is my Bronco and Cruiser, both bent steel frames, same old TLT BLA BLA BLA The frame was bent with a torch in a vise http://i56.photobucket.com/albums/g1...serincrack.jpg bronco http://i56.photobucket.com/albums/g1...nco69/2411.jpg |
http://img180.imageshack.us/img180/5753/dscf04246iu.jpg http://img470.imageshack.us/img470/282/dscf04330fz.jpg http://img351.imageshack.us/img351/3564/dscf04313kk.jpg http://img169.imageshack.us/img169/2701/dscf04306vf.jpg http://img285.imageshack.us/img285/9431/dscf04288kf.jpg Specs: -79 Nissan Cab -TLT axles -Futaba 3306 ESC -Hitec 5625 Servo -Integy Shocks -Pede Trans -11 3/4" WB -2 3/4 Belly clearance -Trail Box -5.98 pds RTR -Colquitt Custom Truggy Chassis |
Some of my scale rigs 1 Attachment(s) I sold the black wrangler but am working on a new one. The other is a replica of the spidertrax black widow |
blackwidow 1 Attachment(s) here she is |
Truck Base : modified stock tlt chassis Body:ford bronco ESC:lpr runner Motor(s): matrix 55t Servo(s):hitec standard Trans:pede Axles:tlt Tires:2.2 moab WB:11.5in Overall Width:9.75in Center Chassis clearance:4in Overall height:11in Weight:donno http://i6.tinypic.com/13zz7uv.jpg http://i6.tinypic.com/13zz8na.jpg |
Truck Base : Custom Alum Chassis Body: 72' C10 ESC: AI Runner plus reverso, waterproof Motor(s): Integey 45t Servo(s): Hitec Trans: pede Axles:tlt Tires: 2.2moabs WB:~~12" Overall Width:~~10" Diff clearance:1.5" Center Chassis clearance:~~4" Overall height:~~10" Weight:idk, heavy as hell... http://img.photobucket.com/albums/v5...usinessend.jpg http://img.photobucket.com/albums/v5...er/backend.jpg http://img.photobucket.com/albums/v5...0withvette.jpg http://img.photobucket.com/albums/v5...awler/side.jpg http://img.photobucket.com/albums/v5...rawler/top.jpg http://img.photobucket.com/albums/v5...wler/belly.jpg |
Truck Base : sw2 tlt Body: jeep rubicon ESC: novak xrs Motor(s): Integey 35 Servo(s): Hitec Trans: pede Axles:tlt Tires: 2.2moabs WB:12" Overall Width:9" Diff clearance:1.75" Center Chassis clearance: 2.75" Overall height:10" Weight: 5.5 lbs http://i68.photobucket.com/albums/i3...c/DSC00631.jpg http://i68.photobucket.com/albums/i3...c/DSC00625.jpg |
tlt custom clod body K5 super rooster AE tranny custom chassis swamper tires better pics soon http://i48.photobucket.com/albums/f2...4/IM002761.jpg |
here some mounty pic http://i46.photobucket.com/albums/f1...tdalake119.jpg http://i46.photobucket.com/albums/f1...tdalake120.jpg http://i46.photobucket.com/albums/f1...tdalake118.jpg mods esc- novak exv 14.4v motor- titan monster bat-two 2400 orion single speed trany form scale hobbie 4-rc4wd leaf springs 4-rc4wd rear hubs 4-rc4wd rims swamp dawgs shocks for a buggy i had buggy leaf spring set up in rear dubble shackle in front full ballbearings ped shafts |
http://i59.photobucket.com/albums/g2.../HPIM0843c.jpg http://i59.photobucket.com/albums/g2...2/DSCN0782.jpg Truck Base :stampede:flipoff: :flipoff: :flipoff: :flipoff: :flipoff: :flipoff: :flipoff: Body:S-10 ESC:old futaba Motor(s):55-turn lathe Servo(s):futaba s3003 Trans:stampede Axles:tlt Tires:masher 2ks WB:11in Overall Width:10in Diff clearance:1.7in Center Chassis clearance:4.5in Overall height:10in Weight:6.5lb:shock: |
1 Attachment(s) hey guys heres my pajero with the croc hunter body on it and the trailer behind: |
3 Attachment(s) Rubicon Buggy Hulkwerks tube frame TLT axles, blackfoot stubs Rc4wd Beadlocks/moabs Pede trans 45t lathe Rebel 2 Hitec 645 Lots of lexan panel work Recaro seat, dash, steering wheel WB. tad over 12.5 Heavy |
3 Attachment(s) Leaf Toyota Bruiser frame TLT axles Jugg leafs up front, bruiser out back Pede trans Narrowed M2K's N Pede wheels, with skip rockrings 27t silv can for now Tundra cab, Bruder bed MSD Hilift LRP waterproof esc Hitec 645 WB. 12.25 WT. 9.5 nice and narrow Built for the trail |
All times are GMT -6. The time now is 11:58 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com